SDI Member · ANSI/SDI compliant

Composite floor deck supplier in Port St. Lucie

Steel-concrete composite floor deck in Port St. Lucie for multi-story construction. Permanent formwork with structural load-sharing.

Steel Deck Institute Member
SDI Member · ANSI/SDI compliant

Composite Floor Decks for Port St. Lucie job sites

Builders in Port St. Lucie order Composite Floor Decks directly from Miami Metal Deck for commercial and industrial projects throughout St. Lucie County and the Space & Treasure Coasts region. Deliveries to Port St. Lucie leave our Miami Gardens facility on a schedule set with your team, with 1-day service available to major Florida cities.

With Port St. Lucie's coastal humidity and salt air, many engineers specify a G90 galvanized finish for its heavier zinc coating; we confirm the finish against your project specifications. Projects in Port St. Lucie follow the Florida Building Code wind-load requirements, so we work directly from your engineer's deck schedule, gauges and attachment details.

Product guide

Product specifications for your Port St. Lucie project

Compare profiles, dimensions, material options and applications to prepare your order. Select a product below to explore its technical details.

1.5" Composite Floor Deck

Designed to bond with poured concrete, the 1.5" composite floor deck combines a high strength-to-weight ratio with better structural efficiency. For Port St. Lucie jobs it is available in 22 GA to 16 GA, with G60/G90 galvanized finishes, and it meets SDI and ANSI standards.

Dimensions and profile

1.5" Composite Floor Deck profile dimensions
1.5" Composite Floor Deck dimensions
PropertyDimension
Profile Depth1.5 inches
Coverage Width36 inches
Rib Spacing6 inches (center to center)
Material Width39 inches

Rib depth is 1.5 inches and coverage width is 36 inches. With 6 inch rib spacing (center to center) and a 39 inch material width, the sheets lap securely and develop strong composite action with poured slabs.

Gauges and thicknesses

1.5" Composite Floor Deck gauges
GaugeBare steel thickness (in)Weight (lbs/sq ft)Typical applications
220.02951.6Light-duty spans.
200.03582Medium spans.
180.04742.6Heavy-duty applications.
160.05983Heavy load spans.

The 1.5" composite floor deck is produced in 22, 20, 18, and 16 gauge to cover a range of load and span needs. Thin gauges (22 and 20) are light and economical. Thick gauges (18 and 16) add structural strength for heavier loads.

Finishes and coatings

1.5" Composite Floor Deck finishes
FinishDetails
Galvanized G60Zinc coating of 0.6 oz/ft². Recommended for general environments.
Galvanized G90Zinc coating of 0.9 oz/ft². Ideal for highly corrosive environments.
Prime-PaintedProvides a base coat for additional protection or paint adhesion.
Bare SteelUnfinished; typically for indoor use or controlled environments.

Finishes for the 1.5" composite floor deck include galvanized (G60 and G90) and prime-painted. Galvanized steel resists corrosion best. Prime paint is a protective base coat for projects that need extra coatings. G60 and G90 conform to ASTM A653.

Material and finish options

Select our high-strength steel 1.5" composite floor deck in galvanized (meeting SDI/ANSI standards), in a painted finish for appearance, or in bare steel when the application calls for it. Durability and steady performance come with every option.

Custom lengths

Deck lengths run from 6′-0″ for small jobs up to 40′-0″ for large spans. Cutting to your required length means a better fit in the field and less scrap. This applies to every Port St. Lucie order.

1.5" Composite Floor Deck features

Looking for a floor system that bonds well to concrete, works with fire ratings, and meets SDI requirements? Our 1.5" composite floor deck suits commercial and residential construction.

Load Capacity at Low Weight

Handles heavy loads without adding much weight, a good fit for composite floors.

Better Structural Efficiency

Works with the concrete as one composite system, gaining strength from the bond.

Galvanized or Prime-Painted Finish

G60/G90 galvanized or prime-painted finishes protect against corrosion and wear.

Fire-Rated Assembly Support

Compatible with fireproofing materials and fire ratings for safer commercial and residential projects.

Meets SDI Standards

Follows Steel Deck Institute (SDI) and ANSI guidelines for quality and code compliance.

Gauges for Every Span

Comes in 22, 20, 18, and 16 gauge, with minimal deflection in composite floor use.

Installation and connections

Installation practices

  • Lay the deck perpendicular to the supports.
  • Attach with 5/8" diameter puddle welds or #10 TEK screws at 6" on the edges.
  • Secure the sidelaps using #10 TEK screws at 12" o.c.

Fasteners and attachments

  • 5/8" diameter puddle welds
  • Edges: #10 TEK screws at 6" o.c.
  • Sidelaps: #10 TEK screws at 12" o.c.

Confirm the profile, gauge, span, loads and connections against your project drawings and the applicable product load tables before ordering.

Applications

Composite Floor Systems

Composite Floor Systems

Bonds to concrete slabs and doubles as permanent formwork, reducing deflection while increasing strength.

Mezzanine Flooring

Mezzanine Flooring

Supports heavy loads on warehouse and commercial mezzanines, and installs efficiently.

Standards and product documentation

The 1.5" composite floor deck is built to SDI (Steel Deck Institute) specifications and ANSI standards, so builders in Port St. Lucie get dependable design and performance.

1.5" Composite Floor Deck questions

What is the 1.5" composite floor deck mainly used for?

It supports concrete slabs as permanent formwork and forms a composite system that increases structural strength and load capacity.

Which gauges can I order for Port St. Lucie projects?

Gauges run from 22 GA to 16 GA. Heavier gauges are the better choice for greater loads and longer spans.

Which finishes are available?

You can order galvanized (G60 or G90) for strong corrosion resistance, prime-painted, or bare steel.

Is custom cutting available?

Yes. Lengths from 6'-0" to 40'-0" can be cut to order, which keeps waste low.

Why does the 1.5" composite deck work well for floors?

Its embossed rib profile grips the concrete mechanically, so the steel deck and the slab share the load as one composite slab.

2" Composite Floor Deck

For floor systems that call for composite bonding with concrete, the 2" composite floor deck is a flexible choice. Its 2 inch depth and 22 GA to 16 GA gauges let it take on heavier loads and longer spans, including on projects around Port St. Lucie.

Dimensions and profile

2" Composite Floor Deck profile dimensions
2" Composite Floor Deck dimensions
PropertyDimension
Profile Depth2 inches
Coverage Width36 inches
Rib Spacing12 inches (center to center)
Rib Height2 inches

The 2" composite floor deck has a 2 inch rib depth and a standard 36 inch coverage width. Ribs sit 12 inches apart (center to center), and the material width supports secure overlaps and strong concrete bonding. The profile is built for maximum load capacity and extended spans.

Gauges and thicknesses

2" Composite Floor Deck gauges
GaugeBare steel thickness (in)Weight (lbs/sq ft)Typical applications
220.02951.6Light-duty roofing and small spans.
200.03582Medium spans, roofing, and siding.
180.04742.6Heavy-duty applications.
160.05983Heavy load spans.

The 2" composite floor deck comes in gauges 22 through 16 for varied load and span demands. Choose 22 or 20 gauge for lightweight, economical deck on shorter spans and lighter loads. Choose 18 or 16 gauge for higher strength on longer spans and heavier loads.

Finishes and coatings

2" Composite Floor Deck finishes
FinishDetails
Galvanized G60Zinc coating of 0.6 oz/ft². Recommended for general environments.
Galvanized G90Zinc coating of 0.9 oz/ft². Ideal for highly corrosive environments.
Prime-PaintedProvides a base coat for additional protection or paint adhesion.
Bare SteelUnfinished; typically for indoor use or controlled environments.

To protect performance over time, the 2" composite floor deck is offered in galvanized (G60 and G90) and prime-painted finishes. Galvanized coatings give superior corrosion resistance. The prime-painted option is a protective base coat for projects that need paint or additional coatings.

Material and finish options

Our high-performance 50 KSI steel 2" composite floor deck can be ordered galvanized to SDI/ANSI standards, painted for better appearance, or bare for specialized uses. Each finish delivers durability and dependable results across many types of construction.

Custom lengths

We supply deck anywhere between 6′-0″ (smaller projects) and 40′-0″ (larger structures). Lengths are made to your requirements, so fit is optimal and waste is minimal. Contractors in Port St. Lucie can specify exact cut lengths.

2" Composite Floor Deck features

Looking for high load-bearing capacity, structural efficiency, and dependable concrete bonding? Our 2" composite floor deck suits heavy-duty, efficient, and sustainable floor construction.

Strong Load Capacity

Made for heavier loads, ideal in industrial floors and demanding applications.

Composite Efficiency

Works with concrete as a composite, giving superior strength and a thinner floor.

Galvanized or Prime-Painted Finish

Choose G60/G90 galvanized or prime-painted for durability and corrosion resistance.

Saves Concrete

Reduces concrete use and lowers material cost without losing strength.

SDI Compliance

Meets Steel Deck Institute (SDI) and ANSI guidelines, ensuring quality and code compliance.

Optimized for Long Spans

Spans greater distances with minimal deflection.

Installation and connections

Installation practices

  • Set the deck perpendicular to the supports.
  • At each support, attach the deck with puddle welds or TEK screws.
  • Overlap the sidelaps and fasten them with screws at 12" o.c.

Fasteners and attachments

  • Puddle welds, 5/8" diameter
  • Edges fastened with #10 TEK screws spaced 6" o.c.
  • Sidelaps fastened with #10 TEK screws at 12" o.c.

Confirm the profile, gauge, span, loads and connections against your project drawings and the applicable product load tables before ordering.

Applications

Composite Floor Systems

Composite Floor Systems

Bonds to concrete slabs to cut deflection and add strength, for heavy-duty floors in multi-story commercial and residential construction.

Mezzanine Flooring

Mezzanine Flooring

A durable base for warehouse and industrial mezzanines, supporting heavy loads and going in efficiently.

Standards and product documentation

The 2" composite floor deck is built to SDI (Steel Deck Institute) specifications, so builders in Port St. Lucie get dependable design and performance.

2" Composite Floor Deck questions

What is the main use for the 2" composite floor deck?

It works as permanent formwork for concrete slabs and forms a composite system, which boosts structural strength and load-bearing capacity.

What gauge range is available for jobs in Port St. Lucie?

Gauges run 22 GA to 16 GA, and the thicker gauges are better for heavier loads and longer spans.

What finishes are available?

Galvanized (G60 or G90) with superior corrosion resistance, prime-painted, and bare steel.

Does it come in custom lengths?

Yes. Deck can be cut from 6'-0" to 40'-0" with minimal waste.

Why is it suited to demanding applications?

The 2 inch depth is deeper than shallower decks, so it supports greater spans and heavier loads.

3" Composite Floor Deck

The 3" composite floor deck suits floor systems that must span farther and carry more load. At 3 inches deep and in 22 GA to 16 GA, it offers superior strength and durability to builders in Port St. Lucie. SDI and ANSI standards apply, and G60 and G90 galvanized finishes help it resist corrosion.

Dimensions and profile

3" Composite Floor Deck profile dimensions
3" Composite Floor Deck dimensions
PropertyDimension
Profile Depth3 inches
Coverage Width36 inches
Rib Spacing12 inches (center to center)
Rib Height3 inches

This profile has a 3 inch rib depth and 36 inch standard coverage width for superior strength in heavy-duty composite floor systems. Rib spacing is 12 inches (center to center), with a 36 inch overall material width, which provides efficient overlaps and excellent concrete bonding. It is engineered for maximum load capacity and extended spans in demanding construction.

Gauges and thicknesses

3" Composite Floor Deck gauges
GaugeBare steel thickness (in)Weight (lbs/sq ft)Typical applications
220.02951.6Light-duty roofing and small spans.
200.03582Medium spans, roofing, and siding.
180.04742.6Heavy-duty applications.
160.05983Heavy load spans.

Gauges for the 3" composite floor deck range from 22 to 16, which covers many load and span requirements. Thinner gauges (22 and 20) are light and economical for shorter spans and lighter loads. Thicker gauges (18 and 16) provide more structural strength for longer spans and heavier loads, and add reliability in tougher applications.

Finishes and coatings

3" Composite Floor Deck finishes
FinishDetails
Galvanized G60Zinc coating of 0.6 oz/ft². Recommended for general environments.
Galvanized G90Zinc coating of 0.9 oz/ft². Ideal for highly corrosive environments.
Prime-PaintedProvides a base coat for additional protection or paint adhesion.
Bare SteelUnfinished; typically for indoor use or controlled environments.

For long-term performance, the 3" composite floor deck is offered in galvanized (G60 and G90) and prime-painted finishes. Galvanized finishes provide superior corrosion resistance, and G90 has a higher zinc coating for locations with more exposure to moisture or chemicals. The prime-painted option is a protective base coat, a good fit when paint or coatings will be applied.

Material and finish options

The 3" composite floor deck is made from high-performance 50 KSI steel. Order it galvanized to SDI/ANSI standards, painted for enhanced aesthetics, or as bare steel for specialized applications. Every option offers durability and consistent performance in varied construction settings.

Custom lengths

Whether the job calls for 6′-0″ lengths on a smaller project or spans of up to 40′-0″ on a larger one, we cut to meet your specific requirements. That means optimal fit and minimal waste. Cut lengths are available for Port St. Lucie jobs of any size.

3" Composite Floor Deck features

Our 3" composite floor deck provides outstanding strength, extended spans, and dependable concrete bonding. It is a fit for heavy-duty, efficient, and sustainable floor systems.

Superior Load-Bearing Strength

Built for heavy loads, which makes it a good fit for industrial uses and demanding construction environments.

Structural Efficiency

Acts together with the concrete as a composite system, cutting floor thickness while maximizing strength.

Galvanized or Prime-Painted Finish

Pick G60/G90 galvanized or prime-painted finishes for better durability and corrosion resistance.

Fire Resistance Compatibility

Works with fireproofing materials and fire ratings for added safety in commercial and residential projects.

Meets SDI Standards

Follows Steel Deck Institute (SDI) and ANSI guidelines for quality and code compliance.

Long-Span Capability

The 3 inch profile spans farther, so large projects need fewer extra structural supports.

Installation and connections

Installation practices

  • Install perpendicular to the supports.
  • Fasten the deck to each support with puddle welds or TEK screws.
  • Overlap sidelaps and fasten with screws at 12" o.c.

Fasteners and attachments

  • 5/8" diameter puddle welds
  • #10 TEK screws at 6" o.c. on edges and at 12" o.c. on sidelaps
  • #10 TEK screws at 12" o.c. at the sidelaps

Confirm the profile, gauge, span, loads and connections against your project drawings and the applicable product load tables before ordering.

Applications

Long-Span Composite Floors

Long-Span Composite Floors

The 3" Composite Floor Deck is made for long spans, so fewer columns are needed. It improves structural efficiency and carries heavy loads in warehouses, distribution centers, and large commercial spaces.

Heavy Equipment Platforms

Heavy Equipment Platforms

The 3" Composite Floor Deck forms durable platforms for heavy machinery, handling concentrated loads and spreading them better in industrial facilities and manufacturing plants.

Standards and product documentation

For Port St. Lucie projects, the 3" composite floor deck complies with SDI (Steel Deck Institute) specifications, ensuring high standards for design and performance.

3" Composite Floor Deck questions

What is the primary purpose of the 3" composite floor deck?

The 3" Composite Floor Deck is permanent formwork that structurally supports concrete slabs and forms a composite system well suited to long spans and heavy loads.

What gauges are available for the 3" composite floor deck for jobs in Port St. Lucie?

22 GA to 16 GA, which gives flexibility across load capacities and structural requirements.

What finishes can I order for the 3" composite floor deck?

Galvanized (G60 or G90) finishes resist corrosion, prime-painted suits projects needing more coatings, and bare steel is for specific applications.

Is custom length cutting offered for the 3" composite floor deck?

Yes, from 6'-0" to 40'-0", for a precise fit and less material waste on site.

What makes the 3" composite floor deck right for large-scale projects?

The deeper 3 inch profile carries longer spans and heavier loads, which is why it is preferred in industrial facilities, warehouses, and multi-story construction requiring maximum durability.

Before you order

Order Composite Floor Decks for your Port St. Lucie project

Share your drawings or a material list and our team will check quantities, profiles and cut lengths. We also prepare takeoffs and shop drawings, then send pricing and delivery options for the Port St. Lucie job site.

Start your quote

What we need to quote your project

  • Your Port St. Lucie project address and when you need material on site.
  • Drawings or a material list with quantities and cut lengths.
  • Specified profile, dimensions, gauge and finish.
  • Connection details, load tables and any supporting documentation.

How We Work

We Guide You Through the Process

From manufacturing to delivery, we ensure precision, efficiency, and compliance with industry standards.

01
01

Takeoff and Shop Drawings Services

We provide specialized takeoff services for accurate quotations and detailed shop drawings to produce optimized cutting lists for sheets, ensuring efficient execution and waste-free outcomes in your projects.

02
02

Manufacture

We manufacture metal decks to SDI and ANSI standards, ensuring strength, durability, and compliance. We provide custom lengths and high-precision fabrication for optimized performance in roof, floor, and form deck applications.

03
03

Swift Deliveries & Nationwide Reach

While based in South Florida, we serve clients nationwide, ensuring quality, efficiency, and timely deliveries across the U.S., reflecting our commitment to excellence without boundaries.

Frequently Asked Questions

Do you deliver composite floor deck to Port St. Lucie?

Yes. We deliver to Port St. Lucie and serve all of Florida with same-day or next-day delivery for most orders.

What spans can composite deck achieve?

Depending on gauge and profile depth, composite deck spans 6–15 feet unshored. We provide span tables and shop drawings for your specific project.

What does composite floor deck mean?

It is a steel deck profile made to work compositely with concrete. Embossments on the steel create a mechanical bond with the concrete, forming a structural slab in which steel and concrete share the load.

How is composite deck different from form deck?

Composite deck stays in place as a permanent structural element of the finished floor, with steel and concrete carrying loads together. Form deck is temporary, and the concrete alone carries the load once cured.

How far can composite floor deck span?

Depending on gauge and profile depth, unshored spans reach 6 to 15 feet. Shored construction can reach longer spans. Our engineers supply span tables and calculations specific to your project.

Do I need shear studs with composite deck?

Shear studs are typically needed for composite action between the slab and the supporting steel beams. Between the deck and the concrete alone, the embossed profile supplies the mechanical connection.

Phone

305 760 25 75

E-Mail

info@mmdeck.com

Address

16000 NW 49th Ave Suite A, Miami Gardens, FL 33014

Get a Free Quote