SDI Member · ANSI/SDI compliant
Type B metal deck in Cape Coral
We supply 1.5" Type B steel roof decking to Cape Coral for commercial and industrial construction, with custom lengths and corrosion-resistant finishes.

Local 1.5" Type B Metal Deck supply for Cape Coral
For job sites in Cape Coral, Miami Metal Deck provides 1.5" Type B Metal Deck cut to length and ready for installation, serving Lee County and the Southwest Florida region. Deliveries to Cape Coral leave our Miami Gardens facility on a schedule set with your team, with 1-day service available to major Florida cities.
With Cape Coral's coastal humidity and salt air, many engineers specify a G90 galvanized finish for its heavier zinc coating; we confirm the finish against your project specifications. We supply to the gauges, lengths and finishes on your approved drawings, which are designed to the Florida Building Code requirements that apply in Lee County.
Product guide
Product specifications for your Cape Coral project
Compare profiles, dimensions, material options and applications to prepare your order. Select a product below to explore its technical details.
1.5" Type B Roof Deck
Looking for a 1.5" Type B metal deck supplier for projects in Cape Coral? This roof deck delivers strong structural performance and goes in quickly. It comes in 22 GA to 16 GA, meets SDI and ANSI standards, and ships in galvanized finishes such as G60 and G90 for added durability and corrosion resistance on Cape Coral roofing jobs.
Dimensions and profile

| Property | Dimension |
|---|---|
| Profile Depth | 1.5 inches |
| Coverage Width | 36 inches |
| Rib Spacing | 6 inches (center to center) |
| Rib Height | 1.5 inches |
This 1.5" Type B metal deck has a 1.5 inch rib depth and a standard coverage width of 36 inches, which makes it structurally efficient for roofing and flooring. Ribs sit 6 inches apart (center to center), and the 39 inch overall material width gives secure overlaps and strong composite action with concrete slabs. The profile maximizes strength at minimal weight, so it works across many kinds of construction.
Gauges and thicknesses
| Gauge | Bare steel thickness (in) | Weight (lbs/sq ft) | Typical applications |
|---|---|---|---|
| 22 | 0.0295 | 1.6 | Light-duty roofing and small spans. |
| 20 | 0.0358 | 2 | Medium spans, roofing, and siding. |
| 18 | 0.0474 | 2.6 | Heavy-duty applications. |
| 16 | 0.0598 | 3 | Heavy load spans. |
There are four gauges to choose from for Type B deck: 22, 20, 18, and 16. Each has different thickness and load capacity, so you can fit the deck to the project. Light and cost-effective, 22 and 20 gauge are best on shorter spans and lighter loads. Stronger 18 and 16 gauge carry longer spans and heavier loads, which makes them ideal for demanding applications.
Finishes and coatings
| Finish | Details |
|---|---|
| Galvanized G60 | Zinc coating of 0.6 oz/ft². Recommended for general environments. |
| Galvanized G90 | Zinc coating of 0.9 oz/ft². Ideal for highly corrosive environments. |
| Prime-Painted | Provides a base coat for additional protection or paint adhesion. |
| Bare Steel | Unfinished; typically for indoor use or controlled environments. |
Type B deck is produced with several finishes for long service life, including galvanized (G60 and G90) and prime-painted. Galvanizing resists corrosion well, and G90 carries a heavier zinc coating for settings with more moisture or chemical exposure. Prime paint supplies a base coat for projects that will receive additional paint or coatings.
Material and finish options
Material grades include high-strength steel at 33 KSI, 40 KSI, 50 KSI, and 80 KSI. Each grade answers a specific structural need and strikes a balance between strength and flexibility. Galvanized (G60/G90) and prime-painted finishes both follow ASTM A653 specifications for corrosion resistance.
Custom lengths
From 6′-0″ pieces on smaller projects to spans of 40′-0″ on larger ones, we handle every dimension with precision and efficiency. Our custom length service is built around your specifications, so the deck fits well and little material is wasted on Cape Coral jobs.
1.5" Type B Roof Deck features
Our 1.5" Type B metal deck combines light weight with durability, fire resistance, and a sustainable design. It suits efficient short-span commercial work and eco-conscious building programs.
High Strength-to-Weight Ratio
Exceptional load capacity at low weight suits roofing systems well.
Standard 36 inches Coverage
Coverage is 36 inches wide with a consistent rib design, so installation takes less time and runs more efficiently.
Galvanized or Prime-Painted Finish
Galvanized G60/G90 or prime-painted: either finish improves durability and resists corrosion.
Compatibility with Roofing Systems
Fits roofing systems that use insulation, waterproofing, reflective coatings, drainage, ventilation, and other components.
Compliance with Standards
Steel Deck Institute (SDI) and ANSI guidelines are met, which assures quality and code compliance.
Wide Gauge Range
Choose 22, 20, 18, or 16 gauge to customize the deck for specific load-bearing requirements and project demands.
Installation and connections
Installation practices
- Place the deck perpendicular to the supports.
- Secure the deck to each support using puddle welds or TEK screws.
- Overlap the sidelaps, then screw them down at 12" o.c.
Fasteners and attachments
- 5/8" Diameter Puddle Welds
- #10 TEK screws at 6" o.c. on edges, and 12" o.c. for sidelaps
- Sidelaps attached using #10 TEK screws at 12" o.c.
Confirm the profile, gauge, span, loads and connections against your project drawings and the applicable product load tables before ordering.
Applications

Roof Deck Applications
Commercial and industrial roof systems that demand structural strength and durability rely heavily on Type B. It carries roofing insulation systems and works for vented as well as non-vented roofs.

Hybrid Structural-Ceiling Systems
Type B can also serve as an exposed ceiling in architectural spaces. It gives structural strength and a clean look while trimming extra materials and installation time.
Standards and product documentation
SDI (Steel Deck Institute) specifications are met by the 1.5" Type B deck, supporting high standards for design and performance in Cape Coral and beyond.
1.5" Type B Roof Deck questions
What gauge do most buyers choose for Type B decking?
20 gauge is typically the most common, because it offers a good balance of cost and strength for ordinary applications. Some projects need a different gauge based on their requirements.
What separates G60 from G90 galvanized finishes?
The coating on G60 is 0.60 oz/ft² versus 0.90 oz/ft² on G90. That makes G90 50% heavier in zinc and more corrosion resistant. G60 works for indoor applications or low-moisture environments, while G90 is better for outdoor use, roofing, steel decking, and structures facing weather, humidity, or corrosive conditions.
What are the maximum spans of the 1.5" Type B deck?
The answer depends on gauge, span type, and loading. For instance, 22-gauge deck spans up to 8 feet in multiple spans, and 16-gauge deck spans up to 14 feet. For exact numbers, refer to the load tables.
Can I get 1.5" Type B metal decking customized for my Cape Coral project?
Yes, gauge, finish, and length are all customizable. Lengths are cut to project needs, so there is less waste and installation goes more efficiently.
Do 1.5" Type B metal decking products meet industry standards?
Yes, they do. The deck follows Steel Deck Institute (SDI) standards and American Iron and Steel Institute (AISI) design guidelines, ensuring quality, safety, and compatibility with construction codes.
Planning your order
1.5" Type B Metal Deck supply for Cape Coral
Send your project drawings or material list so our team can review quantities, profile requirements and cut lengths. We can help with takeoffs and shop drawings, then confirm pricing and delivery options for your Cape Coral project.
Send your drawings for a quoteWhat to include in your quote request
- The profile, gauge and finish shown in your specifications.
- Quantities and lengths, or the drawings we can take them off from.
- The Cape Coral job site address, your target delivery date and any access limits.
- Load tables, attachment details or other documents your engineer specified.
How We Work
We Guide You Through the Process
From manufacturing to delivery, we ensure precision, efficiency, and compliance with industry standards.
Takeoff and Shop Drawings Services
We provide specialized takeoff services for accurate quotations and detailed shop drawings to produce optimized cutting lists for sheets, ensuring efficient execution and waste-free outcomes in your projects.
Manufacture
We manufacture metal decks to SDI and ANSI standards, ensuring strength, durability, and compliance. We provide custom lengths and high-precision fabrication for optimized performance in roof, floor, and form deck applications.
Swift Deliveries & Nationwide Reach
While based in South Florida, we serve clients nationwide, ensuring quality, efficiency, and timely deliveries across the U.S., reflecting our commitment to excellence without boundaries.
Frequently Asked Questions
Do you supply Type B metal deck in Cape Coral?
Yes. Miami Metal Deck supplies Type B roof deck to Cape Coral. Call 305-760-2575 or request a quote for pricing and delivery options.
Can Type B roof deck be ordered in custom lengths?
Yes. Custom lengths from 6' to 40' are available, with gauges from 22 to 16 and G60 or G90 galvanized finishes.
