SDI Member · ANSI/SDI compliant
Type B metal deck in Tallahassee
We supply 1.5" Type B steel roof decking to Tallahassee for commercial and industrial construction, with custom lengths and corrosion-resistant finishes.

Supplying 1.5" Type B Metal Deck in Tallahassee
General contractors and steel erectors in Tallahassee rely on Miami Metal Deck for 1.5" Type B Metal Deck on projects across Leon County and the North Florida / Panhandle region. Deliveries to Tallahassee leave our Miami Gardens facility on a schedule set with your team, with 1-day service available to major Florida cities.
For inland Tallahassee projects, G60 galvanized is often sufficient for enclosed structures, while G90 remains available where the specifications call for more corrosion protection. Projects in Tallahassee follow the Florida Building Code wind-load requirements, so we work directly from your engineer's deck schedule, gauges and attachment details.
Product guide
Product specifications for your Tallahassee project
Compare profiles, dimensions, material options and applications to prepare your order. Select a product below to explore its technical details.
1.5" Type B Roof Deck
Looking for a 1.5" Type B metal deck supplier for projects in Tallahassee? This roof deck delivers strong structural performance and goes in quickly. It comes in 22 GA to 16 GA, meets SDI and ANSI standards, and ships in galvanized finishes such as G60 and G90 for added durability and corrosion resistance on Tallahassee roofing jobs.
Dimensions and profile

| Property | Dimension |
|---|---|
| Profile Depth | 1.5 inches |
| Coverage Width | 36 inches |
| Rib Spacing | 6 inches (center to center) |
| Rib Height | 1.5 inches |
With a 1.5 inch rib depth and a 36 inch standard coverage width, the 1.5" Type B metal deck is structurally efficient for roofing and flooring. The 6 inch rib spacing (center to center) and 39 inch overall material width allow secure overlaps and strong composite action when concrete slabs are added. Strength is maximized and weight is minimized, which keeps the deck durable and versatile on all sorts of construction jobs.
Gauges and thicknesses
| Gauge | Bare steel thickness (in) | Weight (lbs/sq ft) | Typical applications |
|---|---|---|---|
| 22 | 0.0295 | 1.6 | Light-duty roofing and small spans. |
| 20 | 0.0358 | 2 | Medium spans, roofing, and siding. |
| 18 | 0.0474 | 2.6 | Heavy-duty applications. |
| 16 | 0.0598 | 3 | Heavy load spans. |
There are four gauges to choose from for Type B deck: 22, 20, 18, and 16. Each has different thickness and load capacity, so you can fit the deck to the project. Light and cost-effective, 22 and 20 gauge are best on shorter spans and lighter loads. Stronger 18 and 16 gauge carry longer spans and heavier loads, which makes them ideal for demanding applications.
Finishes and coatings
| Finish | Details |
|---|---|
| Galvanized G60 | Zinc coating of 0.6 oz/ft². Recommended for general environments. |
| Galvanized G90 | Zinc coating of 0.9 oz/ft². Ideal for highly corrosive environments. |
| Prime-Painted | Provides a base coat for additional protection or paint adhesion. |
| Bare Steel | Unfinished; typically for indoor use or controlled environments. |
Type B deck is produced with several finishes for long service life, including galvanized (G60 and G90) and prime-painted. Galvanizing resists corrosion well, and G90 carries a heavier zinc coating for settings with more moisture or chemical exposure. Prime paint supplies a base coat for projects that will receive additional paint or coatings.
Material and finish options
Our steel options cover 33 KSI, 40 KSI, 50 KSI, and 80 KSI grades, each engineered for specific structural requirements and a sound mix of strength and flexibility. Finishes in galvanized (G60/G90) and prime-painted conform to ASTM A653 specifications to resist corrosion.
Custom lengths
Deck lengths start at 6′-0″ for compact jobs and run up to 40′-0″ for large structures, so we can fit nearly any layout in Tallahassee. Cutting to your custom length keeps waste low and the deck fitting properly on site.
1.5" Type B Roof Deck features
Lightweight yet durable, our 1.5" Type B metal deck also brings fire resistance and a sustainable design. It is a practical, eco-friendly pick for short-span commercial projects.
High Strength-to-Weight Ratio
Handles substantial load for its weight, a strong fit for roofing systems.
Standard 36 inches Coverage
Each sheet covers 36 inches with a uniform rib design, so crews finish faster and work more efficiently.
Galvanized or Prime-Painted Finish
G60/G90 galvanized and prime-painted finishes are both available to improve durability and corrosion resistance.
Compatibility with Roofing Systems
Supports insulation, waterproofing, reflective coatings, drainage, ventilation, and other roofing components.
Compliance with Standards
Quality and code compliance are backed by Steel Deck Institute (SDI) and ANSI guidelines.
Wide Gauge Range
The 22, 20, 18, and 16 gauge options let you match the deck to the load-bearing needs and demands of the project.
Installation and connections
Installation practices
- Place the deck perpendicular to the supports.
- Secure the deck to each support using puddle welds or TEK screws.
- Overlap the sidelaps, then screw them down at 12" o.c.
Fasteners and attachments
- 5/8" Diameter Puddle Welds
- #10 TEK screws at 6" o.c. on edges, and 12" o.c. for sidelaps
- Sidelaps attached using #10 TEK screws at 12" o.c.
Confirm the profile, gauge, span, loads and connections against your project drawings and the applicable product load tables before ordering.
Applications

Roof Deck Applications
Where commercial and industrial roofs need strength and durability, Type B is a common pick. It supports roofing insulation systems and suits both vented and non-vented roofing.

Hybrid Structural-Ceiling Systems
In architectural spaces, Type B decking can double as an exposed ceiling. It supplies structural strength and a clean finish, and it reduces added materials and installation time.
Standards and product documentation
The 1.5" Type B deck meets SDI (Steel Deck Institute) specifications, which sets a high bar for design and performance on Tallahassee projects.
1.5" Type B Roof Deck questions
What gauge do most buyers choose for Type B decking?
20 gauge is typically the most common, because it offers a good balance of cost and strength for ordinary applications. Some projects need a different gauge based on their requirements.
What separates G60 from G90 galvanized finishes?
The coating on G60 is 0.60 oz/ft² versus 0.90 oz/ft² on G90. That makes G90 50% heavier in zinc and more corrosion resistant. G60 works for indoor applications or low-moisture environments, while G90 is better for outdoor use, roofing, steel decking, and structures facing weather, humidity, or corrosive conditions.
What are the maximum spans of the 1.5" Type B deck?
The answer depends on gauge, span type, and loading. For instance, 22-gauge deck spans up to 8 feet in multiple spans, and 16-gauge deck spans up to 14 feet. For exact numbers, refer to the load tables.
Can I get 1.5" Type B metal decking customized for my Tallahassee project?
Yes, gauge, finish, and length are all customizable. Lengths are cut to project needs, so there is less waste and installation goes more efficiently.
Do 1.5" Type B metal decking products meet industry standards?
Yes, they do. The deck follows Steel Deck Institute (SDI) standards and American Iron and Steel Institute (AISI) design guidelines, ensuring quality, safety, and compatibility with construction codes.
Planning your order
1.5" Type B Metal Deck supply for Tallahassee
Send your project drawings or material list so our team can review quantities, profile requirements and cut lengths. We can help with takeoffs and shop drawings, then confirm pricing and delivery options for your Tallahassee project.
Send your drawings for a quoteWhat to include in your quote request
- The profile, gauge and finish shown in your specifications.
- Quantities and lengths, or the drawings we can take them off from.
- The Tallahassee job site address, your target delivery date and any access limits.
- Load tables, attachment details or other documents your engineer specified.
How We Work
We Guide You Through the Process
From manufacturing to delivery, we ensure precision, efficiency, and compliance with industry standards.
Takeoff and Shop Drawings Services
We provide specialized takeoff services for accurate quotations and detailed shop drawings to produce optimized cutting lists for sheets, ensuring efficient execution and waste-free outcomes in your projects.
Manufacture
We manufacture metal decks to SDI and ANSI standards, ensuring strength, durability, and compliance. We provide custom lengths and high-precision fabrication for optimized performance in roof, floor, and form deck applications.
Swift Deliveries & Nationwide Reach
While based in South Florida, we serve clients nationwide, ensuring quality, efficiency, and timely deliveries across the U.S., reflecting our commitment to excellence without boundaries.
Frequently Asked Questions
Do you supply Type B metal deck in Tallahassee?
Yes. Miami Metal Deck supplies Type B roof deck to Tallahassee. Call 305-760-2575 or request a quote for pricing and delivery options.
Can Type B roof deck be ordered in custom lengths?
Yes. Custom lengths from 6' to 40' are available, with gauges from 22 to 16 and G60 or G90 galvanized finishes.
