SDI Member · ANSI/SDI compliant
Type B metal deck in Tampa
We supply 1.5" Type B steel roof decking to Tampa for commercial and industrial construction, with custom lengths and corrosion-resistant finishes.

Supplying 1.5" Type B Metal Deck in Tampa
General contractors and steel erectors in Tampa rely on Miami Metal Deck for 1.5" Type B Metal Deck on projects across Hillsborough County and the Central Florida region. We ship to Tampa from Miami Gardens, offering 1-day service to major Florida cities and coordinating freight with your site schedule.
Salt air and humidity near the coast in Tampa favor heavier zinc coatings such as G90 galvanized. We match the finish to what your drawings call for. Projects in Tampa follow the Florida Building Code wind-load requirements, so we work directly from your engineer's deck schedule, gauges and attachment details.
Product guide
Product specifications for your Tampa project
Compare profiles, dimensions, material options and applications to prepare your order. Select a product below to explore its technical details.
1.5" Type B Roof Deck
Looking for a 1.5" Type B metal deck supplier for projects in Tampa? This roof deck delivers strong structural performance and goes in quickly. It comes in 22 GA to 16 GA, meets SDI and ANSI standards, and ships in galvanized finishes such as G60 and G90 for added durability and corrosion resistance on Tampa roofing jobs.
Dimensions and profile

| Property | Dimension |
|---|---|
| Profile Depth | 1.5 inches |
| Coverage Width | 36 inches |
| Rib Spacing | 6 inches (center to center) |
| Rib Height | 1.5 inches |
With a 1.5 inch rib depth and a 36 inch standard coverage width, the 1.5" Type B metal deck is structurally efficient for roofing and flooring. The 6 inch rib spacing (center to center) and 39 inch overall material width allow secure overlaps and strong composite action when concrete slabs are added. Strength is maximized and weight is minimized, which keeps the deck durable and versatile on all sorts of construction jobs.
Gauges and thicknesses
| Gauge | Bare steel thickness (in) | Weight (lbs/sq ft) | Typical applications |
|---|---|---|---|
| 22 | 0.0295 | 1.6 | Light-duty roofing and small spans. |
| 20 | 0.0358 | 2 | Medium spans, roofing, and siding. |
| 18 | 0.0474 | 2.6 | Heavy-duty applications. |
| 16 | 0.0598 | 3 | Heavy load spans. |
Four gauges are available for Type B deck: 22, 20, 18, and 16. Thickness and load capacity rise as the gauge number drops. Choose 22 or 20 for shorter spans and lighter loads, where light weight and low cost matter. Choose 18 or 16 when the application is demanding, since these gauges provide extra strength for longer spans and heavier loads.
Finishes and coatings
| Finish | Details |
|---|---|
| Galvanized G60 | Zinc coating of 0.6 oz/ft². Recommended for general environments. |
| Galvanized G90 | Zinc coating of 0.9 oz/ft². Ideal for highly corrosive environments. |
| Prime-Painted | Provides a base coat for additional protection or paint adhesion. |
| Bare Steel | Unfinished; typically for indoor use or controlled environments. |
Several finishes are available so the Type B deck lasts, among them galvanized (G60 and G90) and prime-painted. All galvanized finishes resist corrosion, but G90 has more zinc and is better where moisture or chemicals are a bigger concern. A prime-painted deck arrives with a protective base coat, so it works well when more coats of paint or coatings will follow.
Material and finish options
Steel is offered in 33 KSI, 40 KSI, 50 KSI, and 80 KSI grades, each engineered for a particular structural demand and balancing strength against flexibility. Both galvanized (G60/G90) and prime-painted finishes conform to ASTM A653 for corrosion resistance.
Custom lengths
Need a short piece or a long one? We cut deck from 6′-0″ for smaller projects to 40′-0″ for large ones, accurately and efficiently. Ordering custom lengths for your Tampa job means a better fit and less scrap.
1.5" Type B Roof Deck features
With its light weight, durability, fire resistance, and sustainable design, our 1.5" Type B metal deck lifts the performance of efficient, eco-friendly short-span commercial applications.
High Strength-to-Weight Ratio
Carries heavy loads while keeping weight down, which makes it a good match for roofing systems.
Standard 36 inches Coverage
The 36-inch coverage and consistent rib pattern cut installation time and raise jobsite efficiency.
Galvanized or Prime-Painted Finish
Pick G60/G90 galvanized or a prime-painted finish for better durability and corrosion resistance.
Compatibility with Roofing Systems
Works with roofing assemblies that include insulation, waterproofing, reflective coatings, drainage, ventilation, and related components.
Compliance with Standards
Follows Steel Deck Institute (SDI) and ANSI guidelines, so quality and code compliance are built in.
Wide Gauge Range
Offered in 22, 20, 18, and 16 gauges so you can tailor the deck to the load requirements of your project.
Installation and connections
Installation practices
- Run the deck perpendicular to the supports.
- At every support, attach the deck with puddle welds or TEK screws.
- Lap the sidelaps and fasten them with screws at 12" o.c.
Fasteners and attachments
- 5/8" Diameter Puddle Welds
- #10 TEK screws at 6" o.c. on edges, and 12" o.c. for sidelaps
- Sidelaps attached using #10 TEK screws at 12" o.c.
Confirm the profile, gauge, span, loads and connections against your project drawings and the applicable product load tables before ordering.
Applications

Roof Deck Applications
Type B sees wide use in commercial and industrial roof systems where structural strength and durability are essential. Roofing insulation systems sit on it, and it handles vented and non-vented roofing alike.

Hybrid Structural-Ceiling Systems
Left exposed as a ceiling element in architectural spaces, Type B decking provides structural strength and a clean finish. That also reduces the need for added materials and shortens installation time.
Standards and product documentation
SDI (Steel Deck Institute) specifications are met by the 1.5" Type B deck, supporting high standards for design and performance in Tampa and beyond.
1.5" Type B Roof Deck questions
Which gauge is typical for Type B decking?
20 gauge is generally the most common, as it balances cost and strength for typical applications. Other gauges may be needed depending on project-specific requirements.
G60 versus G90 galvanized: what is the difference?
G60 carries 0.60 oz/ft² of coating, and G90 carries 0.90 oz/ft². The extra 50% zinc in G90 gives greater corrosion resistance. Use G60 indoors or in low-moisture environments. Use G90 outdoors, on roofing and steel decking, and on structures exposed to weather, humidity, or corrosive conditions.
What maximum spans can the 1.5" Type B deck achieve?
Maximum spans vary with gauge, span type, and load requirements. 22-gauge decks, for example, can span up to 8 feet under multiple spans, while 16-gauge decks can span up to 14 feet. Always consult load tables for precise details.
Is customization available for 1.5" Type B metal decking on Tampa jobs?
Yes. Gauge, finish, and length can be customized. Cutting lengths to project needs reduces waste and optimizes installation efficiency.
Does 1.5" Type B metal decking satisfy industry standards?
Yes. Steel Deck Institute (SDI) standards and American Iron and Steel Institute (AISI) design guidelines are both met, which ensures quality, safety, and compatibility with construction codes.
Ordering made simple
1.5" Type B Metal Deck for Tampa construction
Start with your plans or a takeoff. We review the profile, gauge, quantities and lengths, help with shop drawings when you need them, and come back with pricing and a delivery plan for Tampa.
Send your project requirementsWhat to include in your quote request
- Product profile or series, dimensions, gauge and specified finish.
- Required quantities, sheet or member lengths, and project drawings.
- Project address in Tampa, delivery date and site access requirements.
- Any specified load tables, connection details or supporting documentation.
How We Work
We Guide You Through the Process
From manufacturing to delivery, we ensure precision, efficiency, and compliance with industry standards.
Takeoff and Shop Drawings Services
We provide specialized takeoff services for accurate quotations and detailed shop drawings to produce optimized cutting lists for sheets, ensuring efficient execution and waste-free outcomes in your projects.
Manufacture
We manufacture metal decks to SDI and ANSI standards, ensuring strength, durability, and compliance. We provide custom lengths and high-precision fabrication for optimized performance in roof, floor, and form deck applications.
Swift Deliveries & Nationwide Reach
While based in South Florida, we serve clients nationwide, ensuring quality, efficiency, and timely deliveries across the U.S., reflecting our commitment to excellence without boundaries.
Frequently Asked Questions
Do you supply Type B metal deck in Tampa?
Yes. Miami Metal Deck supplies Type B roof deck to Tampa. Call 305-760-2575 or request a quote for pricing and delivery options.
Can Type B roof deck be ordered in custom lengths?
Yes. Custom lengths from 6' to 40' are available, with gauges from 22 to 16 and G60 or G90 galvanized finishes.
