SDI Member · ANSI/SDI compliant

3" Type N metal deck supplier in Jacksonville

Long-span Type N roof deck in Jacksonville for warehouses, industrial facilities, and large commercial roof systems.

Steel Deck Institute Member
SDI Member · ANSI/SDI compliant

Local 3" Type N Metal Deck supply for Jacksonville

Miami Metal Deck supplies 3" Type N Metal Deck to contractors, erectors and fabricators building in Jacksonville and across Duval County and the North Florida / Panhandle region. Deliveries to Jacksonville leave our Miami Gardens facility on a schedule set with your team, with 1-day service available to major Florida cities.

Coastal conditions around Jacksonville make corrosion protection a priority, and G90 galvanized steel is a common choice there. Our team checks the specified finish before we quote. We supply to the gauges, lengths and finishes on your approved drawings, which are designed to the Florida Building Code requirements that apply in Duval County.

Product guide

Product specifications for your Jacksonville project

Compare profiles, dimensions, material options and applications to prepare your order. Select a product below to explore its technical details.

3" Type N Roof Deck

Because of its long-span capability and structural strength, 3" Type N metal deck is widely specified for roofs. The Type N profile is 3 inches deep, with gauges from 22 GA to 16 GA for flexibility on roofing projects in Jacksonville. It complies with SDI and ANSI standards and is offered in galvanized finishes such as G60 and G90.

Dimensions and profile

3" Type N Roof Deck profile dimensions
3" Type N Roof Deck dimensions
PropertyDimension
Profile Depth3 inches
Coverage Width24 inches
Rib Spacing8 inches (center to center)
Rib Height3 inches

A 3 inch profile depth and a 24 inch coverage width define the Type N Roof Deck, which also has 8 inch rib spacing (center to center) and a 3 inch rib height. The deep rib is what gives the profile its strength on long spans and heavy roof loads, and the wide coverage means fewer sheets to set.

Gauges and thicknesses

3" Type N Roof Deck gauges
GaugeBare steel thickness (in)Weight (lbs/sq ft)Typical applications
220.02951.8Light duty roofs.
200.03582.2Standard commercial roofs.
180.04742.9Heavy load areas.
160.05983.7Long spans, high loads.

Choose from 22, 20, 18, and 16 gauge when ordering Type N Roof Deck. Thickness and load capacity differ by gauge, so you can fit the deck to the roofing project. For shorter spans and lighter loads, lighter gauges (22 and 20) are economical. For long spans and heavy-duty roofing, heavier gauges (18 and 16) deliver extra strength and durability.

Finishes and coatings

3" Type N Roof Deck finishes
FinishDetails
Galvanized G60Zinc coating of 0.6 oz/ft². Recommended for general environments.
Galvanized G90Zinc coating of 0.9 oz/ft². Ideal for highly corrosive environments.
Prime-PaintedProvides a base coat for additional protection or paint adhesion.
Bare SteelUnfinished; typically for indoor use or controlled environments.

Several finish options keep the Type N deck performing over the long term, among them galvanized (G60 and G90) and prime-painted. Excellent corrosion resistance comes from galvanizing, and G90 has more zinc for greater exposure to moisture or chemicals. If a project needs additional paint or coating layers, the prime-painted option gives a protective base coat.

Material and finish options

Our Type N 3" Roof Deck uses high-strength 80 KSI steel. It is offered with a corrosion-resistant galvanized finish meeting ANSI standards, prime-painted finishes for added protection, or bare steel for specialized applications. Each finish is engineered for durability and dependable performance in demanding roofing environments.

Custom lengths

Whether a smaller roofing job needs deck as short as 6′-0″ or a large-scale build needs up to 40′-0″, the 3" Type N Roof Deck is delivered with accuracy and efficiency. Our custom length service for Jacksonville projects ensures an optimal fit, reduced waste, and streamlined installation.

3" Type N Roof Deck features

Our 3" Type N roof deck delivers superior strength, fire-rated performance, and long-span efficiency. It is well suited to large commercial roofs and sustainable building applications.

Deep Rib Profile for High Strength

A 3-inch rib depth provides superior strength for longer spans and heavy roofing loads.

Wide Coverage Efficiency

Standard 24-inch coverage uses less material and makes installation simpler, a plus on large-scale projects.

Corrosion-Resistant Finish Options

G60 or G90 galvanized finishes stand up well to harsh environmental conditions.

Fire and Acoustic Performance

Satisfies fire-rating standards in approved assemblies, and supports insulation for soundproofing and thermal efficiency.

Compliance with SDI Standards

Steel Deck Institute (SDI) and ANSI guidelines are met, ensuring quality and code compliance.

Long Span Capability

Gauges of 22, 20, 18, and 16 let you customize the deck to specific load-bearing requirements and project demands.

Installation and connections

Installation practices

  • Set the deck perpendicular to the supports.
  • Secure the deck to each support using puddle welds or TEK screws.
  • Overlap the sidelaps and screw them down at 12" o.c. (on center).

Fasteners and attachments

  • 5/8" Diameter Puddle Welds
  • #12 or #14 TEK screws at 6" o.c. on edges, and 12" o.c. for sidelaps
  • Sidelaps attached using #12 TEK screws at 12" o.c.

Confirm the profile, gauge, span, loads and connections against your project drawings and the applicable product load tables before ordering.

Applications

Long-Span Roofing Systems

Long-Span Roofing Systems

Large commercial and industrial roofs that need long spans and fewer supports are a perfect match for Type N. The 3-inch rib profile gives exceptional strength and efficiency across expansive roof designs.

Fire-Rated Roof Assemblies

Fire-Rated Roof Assemblies

Fire-rated roof systems commonly use Type N, which works with insulation and fireproofing materials. It supports safety and performance in demanding commercial and industrial applications.

Standards and product documentation

The 3" Type N deck complies with SDI (Steel Deck Institute) specifications, which sets high standards for design and performance on Jacksonville roofs.

3" Type N Roof Deck questions

What are the typical uses of 3" Type N Roof Deck?

Long-span roofing is its purpose. It provides structural support for commercial and industrial roof systems.

What spans can Type N Roof Deck handle?

Span depends on gauge, and Type N Deck can reach up to 16 feet, which reduces intermediate supports.

Which gauges are offered for the 3" Type N Roof Deck?

You can choose from 16 GA to 22 GA to meet different load and span requirements.

Is Type N Roof Deck compatible with fire-rated roofing systems in Jacksonville?

Yes. It supports fire-rated assemblies and works with insulation and fireproofing materials for enhanced safety.

Which finishes can I get on Type N Roof Deck?

Galvanized (G60 or G90) for corrosion resistance, plus prime-painted options for extra protection.

Planning your order

3" Type N Metal Deck supply for Jacksonville

Send your project drawings or material list so our team can review quantities, profile requirements and cut lengths. We can help with takeoffs and shop drawings, then confirm pricing and delivery options for your Jacksonville project.

Send your drawings for a quote

Helpful details for an accurate quote

  • The profile, gauge and finish shown in your specifications.
  • Quantities and lengths, or the drawings we can take them off from.
  • The Jacksonville job site address, your target delivery date and any access limits.
  • Load tables, attachment details or other documents your engineer specified.

How We Work

We Guide You Through the Process

From manufacturing to delivery, we ensure precision, efficiency, and compliance with industry standards.

01
01

Takeoff and Shop Drawings Services

We provide specialized takeoff services for accurate quotations and detailed shop drawings to produce optimized cutting lists for sheets, ensuring efficient execution and waste-free outcomes in your projects.

02
02

Manufacture

We manufacture metal decks to SDI and ANSI standards, ensuring strength, durability, and compliance. We provide custom lengths and high-precision fabrication for optimized performance in roof, floor, and form deck applications.

03
03

Swift Deliveries & Nationwide Reach

While based in South Florida, we serve clients nationwide, ensuring quality, efficiency, and timely deliveries across the U.S., reflecting our commitment to excellence without boundaries.

Frequently Asked Questions

Where can I buy Type N deck in Jacksonville?

Miami Metal Deck supplies 3" Type N roof deck to Jacksonville. Contact us at 305-760-2575 for pricing and delivery.

When should I use Type N instead of Type B?

Type N is ideal for long-span applications such as warehouses where fewer interior columns are preferred. Type B suits standard commercial and industrial spans.

Phone

305 760 25 75

E-Mail

info@mmdeck.com

Address

16000 NW 49th Ave Suite A, Miami Gardens, FL 33014

Get a Free Quote