SDI Member · ANSI/SDI compliant

Metal roof deck supplier in Melbourne

We supply certified (SDI) metal roof decks in Melbourne to support high-rise, hospitality, and industrial roof structural needs.

Steel Deck Institute Member
SDI Member · ANSI/SDI compliant

Metal Roof Decks for Melbourne job sites

Miami Metal Deck supplies Metal Roof Decks to contractors, erectors and fabricators building in Melbourne and across Brevard County and the Space & Treasure Coasts region. Orders for Melbourne ship from our Miami Gardens facility, with 1-day service to major Florida cities and delivery scheduled around your erection sequence.

Coastal conditions around Melbourne make corrosion protection a priority, and G90 galvanized steel is a common choice there. Our team checks the specified finish before we quote. We supply to the gauges, lengths and finishes on your approved drawings, which are designed to the Florida Building Code requirements that apply in Brevard County.

Product guide

Product specifications for your Melbourne project

Compare profiles, dimensions, material options and applications to prepare your order. Select a product below to explore its technical details.

1.5" Type B Roof Deck

Gauges from 22 GA to 16 GA, SDI and ANSI compliance, and galvanized finishes such as G60 and G90 are what you get from our 1.5 Type B metal deck, supplied for projects in Melbourne. Built for roof applications, it combines structural strength with easy installation, and the galvanizing adds durability and corrosion resistance for roofing projects in Melbourne.

Dimensions and profile

1.5" Type B Roof Deck profile dimensions
1.5" Type B Roof Deck dimensions
PropertyDimension
Profile Depth1.5 inches
Coverage Width36 inches
Rib Spacing6 inches (center to center)
Rib Height1.5 inches

This 1.5" Type B metal deck has a 1.5 inch rib depth and a standard coverage width of 36 inches, which makes it structurally efficient for roofing and flooring. Ribs sit 6 inches apart (center to center), and the 39 inch overall material width gives secure overlaps and strong composite action with concrete slabs. The profile maximizes strength at minimal weight, so it works across many kinds of construction.

Gauges and thicknesses

1.5" Type B Roof Deck gauges
GaugeBare steel thickness (in)Weight (lbs/sq ft)Typical applications
220.02951.6Light-duty roofing and small spans.
200.03582Medium spans, roofing, and siding.
180.04742.6Heavy-duty applications.
160.05983Heavy load spans.

There are four gauges to choose from for Type B deck: 22, 20, 18, and 16. Each has different thickness and load capacity, so you can fit the deck to the project. Light and cost-effective, 22 and 20 gauge are best on shorter spans and lighter loads. Stronger 18 and 16 gauge carry longer spans and heavier loads, which makes them ideal for demanding applications.

Finishes and coatings

1.5" Type B Roof Deck finishes
FinishDetails
Galvanized G60Zinc coating of 0.6 oz/ft². Recommended for general environments.
Galvanized G90Zinc coating of 0.9 oz/ft². Ideal for highly corrosive environments.
Prime-PaintedProvides a base coat for additional protection or paint adhesion.
Bare SteelUnfinished; typically for indoor use or controlled environments.

Several finishes are available so the Type B deck lasts, among them galvanized (G60 and G90) and prime-painted. All galvanized finishes resist corrosion, but G90 has more zinc and is better where moisture or chemicals are a bigger concern. A prime-painted deck arrives with a protective base coat, so it works well when more coats of paint or coatings will follow.

Material and finish options

Steel is offered in 33 KSI, 40 KSI, 50 KSI, and 80 KSI grades, each engineered for a particular structural demand and balancing strength against flexibility. Both galvanized (G60/G90) and prime-painted finishes conform to ASTM A653 for corrosion resistance.

Custom lengths

Need a short piece or a long one? We cut deck from 6′-0″ for smaller projects to 40′-0″ for large ones, accurately and efficiently. Ordering custom lengths for your Melbourne job means a better fit and less scrap.

1.5" Type B Roof Deck features

With its light weight, durability, fire resistance, and sustainable design, our 1.5" Type B metal deck lifts the performance of efficient, eco-friendly short-span commercial applications.

High Strength-to-Weight Ratio

Exceptional load capacity at low weight suits roofing systems well.

Standard 36 inches Coverage

Coverage is 36 inches wide with a consistent rib design, so installation takes less time and runs more efficiently.

Galvanized or Prime-Painted Finish

Galvanized G60/G90 or prime-painted: either finish improves durability and resists corrosion.

Compatibility with Roofing Systems

Fits roofing systems that use insulation, waterproofing, reflective coatings, drainage, ventilation, and other components.

Compliance with Standards

Steel Deck Institute (SDI) and ANSI guidelines are met, which assures quality and code compliance.

Wide Gauge Range

Choose 22, 20, 18, or 16 gauge to customize the deck for specific load-bearing requirements and project demands.

Installation and connections

Installation practices

  • Place the deck perpendicular to the supports.
  • Secure the deck to each support using puddle welds or TEK screws.
  • Overlap the sidelaps, then screw them down at 12" o.c.

Fasteners and attachments

  • 5/8" Diameter Puddle Welds
  • #10 TEK screws at 6" o.c. on edges, and 12" o.c. for sidelaps
  • Sidelaps attached using #10 TEK screws at 12" o.c.

Confirm the profile, gauge, span, loads and connections against your project drawings and the applicable product load tables before ordering.

Applications

Roof Deck Applications

Roof Deck Applications

Type B sees wide use in commercial and industrial roof systems where structural strength and durability are essential. Roofing insulation systems sit on it, and it handles vented and non-vented roofing alike.

Hybrid Structural-Ceiling Systems

Hybrid Structural-Ceiling Systems

Left exposed as a ceiling element in architectural spaces, Type B decking provides structural strength and a clean finish. That also reduces the need for added materials and shortens installation time.

Standards and product documentation

The 1.5" Type B deck meets SDI (Steel Deck Institute) specifications, which sets a high bar for design and performance on Melbourne projects.

1.5" Type B Roof Deck questions

Which gauge is used most often for Type B decking?

Most projects use 20 gauge, since it balances cost and strength for typical applications. Specific project requirements may call for a different gauge.

How do G60 and G90 galvanized finishes differ?

G60 has a 0.60 oz/ft² coating and G90 has 0.90 oz/ft², which is 50% more zinc and better corrosion resistance. G60 fits indoor use or low-moisture settings. G90 is the choice for outdoor use, roofing, steel decking, and structures exposed to weather, humidity, or corrosive conditions.

How far can the 1.5" Type B deck span?

Gauge, span type, and load requirements all affect maximum span. As an example, 22-gauge deck can span up to 8 feet over multiple spans, and 16-gauge deck can reach up to 14 feet. Check the load tables for exact values.

Can 1.5" Type B metal deck be customized for a project in Melbourne?

Yes. Gauge, finish, and length can all be customized. Custom lengths are cut to the project, which cuts waste and makes installation more efficient.

Is 1.5" Type B metal deck compliant with industry standards?

Yes. It follows Steel Deck Institute (SDI) standards and American Iron and Steel Institute (AISI) design guidelines, which supports quality, safety, and compatibility with building codes.

3" Type N Roof Deck

Because of its long-span capability and structural strength, 3" Type N metal deck is widely specified for roofs. The Type N profile is 3 inches deep, with gauges from 22 GA to 16 GA for flexibility on roofing projects in Melbourne. It complies with SDI and ANSI standards and is offered in galvanized finishes such as G60 and G90.

Dimensions and profile

3" Type N Roof Deck profile dimensions
3" Type N Roof Deck dimensions
PropertyDimension
Profile Depth3 inches
Coverage Width24 inches
Rib Spacing8 inches (center to center)
Rib Height3 inches

A 3 inch profile depth and a 24 inch coverage width define the Type N Roof Deck, which also has 8 inch rib spacing (center to center) and a 3 inch rib height. The deep rib is what gives the profile its strength on long spans and heavy roof loads, and the wide coverage means fewer sheets to set.

Gauges and thicknesses

3" Type N Roof Deck gauges
GaugeBare steel thickness (in)Weight (lbs/sq ft)Typical applications
220.02951.8Light duty roofs.
200.03582.2Standard commercial roofs.
180.04742.9Heavy load areas.
160.05983.7Long spans, high loads.

Gauges for Type N deck include 22, 20, 18, and 16, giving a spread of thicknesses and load capacities for each project. Lightweight, cost-effective 22 and 20 gauge fit shorter spans and lighter loads. For demanding applications, 18 and 16 gauge deliver greater structural strength and support longer spans and heavier loads.

Finishes and coatings

3" Type N Roof Deck finishes
FinishDetails
Galvanized G60Zinc coating of 0.6 oz/ft². Recommended for general environments.
Galvanized G90Zinc coating of 0.9 oz/ft². Ideal for highly corrosive environments.
Prime-PaintedProvides a base coat for additional protection or paint adhesion.
Bare SteelUnfinished; typically for indoor use or controlled environments.

Type N deck is available with several finishes for lasting performance, including galvanized (G60 and G90) and prime-painted. Galvanizing resists corrosion well, and G90 has a heavier zinc coating for environments with more moisture or chemical exposure. Prime paint adds a base coat, so it fits projects that call for extra paint or coatings.

Material and finish options

Our Type N 3" Roof Deck uses high-strength 80 KSI steel. It is offered with a corrosion-resistant galvanized finish meeting ANSI standards, prime-painted finishes for added protection, or bare steel for specialized applications. Each finish is engineered for durability and dependable performance in demanding roofing environments.

Custom lengths

Deck lengths run from 6′-0″ on smaller roofing projects to 40′-0″ on large-scale construction, and the 3" Type N Roof Deck is supplied accurately and efficiently. Custom lengths for Melbourne jobs give an optimal fit, reduce waste, and streamline installation.

3" Type N Roof Deck features

Our 3" Type N roof deck delivers superior strength, fire-rated performance, and long-span efficiency. It is well suited to large commercial roofs and sustainable building applications.

Deep Rib Profile for High Strength

The 3-inch rib depth gives superior strength, which suits longer spans and heavy roofing loads.

Wide Coverage Efficiency

Standard 24-inch coverage lowers material usage and simplifies installation, perfect for large-scale projects.

Corrosion-Resistant Finish Options

G60 or G90 galvanized finishes are available, with excellent durability and resistance to harsh environmental conditions.

Fire and Acoustic Performance

Fire-rating standards are met when used in approved assemblies, and insulation is supported for soundproofing and thermal efficiency.

Compliance with SDI Standards

Follows Steel Deck Institute (SDI) and ANSI guidelines, so quality and code compliance are ensured.

Long Span Capability

Offered in 22, 20, 18, and 16 gauges to customize for load-bearing requirements and project demands.

Installation and connections

Installation practices

  • Lay the deck perpendicular to the supports.
  • Fasten the deck at every support with puddle welds or TEK screws.
  • Overlap sidelaps and secure them with screws at 12" o.c. (on center).

Fasteners and attachments

  • 5/8" Diameter Puddle Welds
  • #12 or #14 TEK screws at 6" o.c. on edges, and 12" o.c. for sidelaps
  • Sidelaps attached using #12 TEK screws at 12" o.c.

Confirm the profile, gauge, span, loads and connections against your project drawings and the applicable product load tables before ordering.

Applications

Long-Span Roofing Systems

Long-Span Roofing Systems

Large commercial and industrial roofs that need long spans and fewer supports are a perfect match for Type N. The 3-inch rib profile gives exceptional strength and efficiency across expansive roof designs.

Fire-Rated Roof Assemblies

Fire-Rated Roof Assemblies

Fire-rated roof systems commonly use Type N, which works with insulation and fireproofing materials. It supports safety and performance in demanding commercial and industrial applications.

Standards and product documentation

The 3" Type N deck complies with SDI (Steel Deck Institute) specifications, which sets high standards for design and performance on Melbourne roofs.

3" Type N Roof Deck questions

What are the typical uses of 3" Type N Roof Deck?

Long-span roofing is its purpose. It provides structural support for commercial and industrial roof systems.

What spans can Type N Roof Deck handle?

Span depends on gauge, and Type N Deck can reach up to 16 feet, which reduces intermediate supports.

Which gauges are offered for the 3" Type N Roof Deck?

You can choose from 16 GA to 22 GA to meet different load and span requirements.

Is Type N Roof Deck compatible with fire-rated roofing systems in Melbourne?

Yes. It supports fire-rated assemblies and works with insulation and fireproofing materials for enhanced safety.

Which finishes can I get on Type N Roof Deck?

Galvanized (G60 or G90) for corrosion resistance, plus prime-painted options for extra protection.

1.5" Type B Vented Roof Deck

Designed for Lightweight Insulated Concrete (LWIC) applications, the 1.5" Type B Vented Deck improves bonding and load distribution. This vented Type B profile is 1.5 inches deep and comes in gauges from 22 GA to 18 GA, so it adapts to different projects in Melbourne. It complies with SDI and ANSI standards and is offered in galvanized finishes such as G60 and G90 for durability and corrosion resistance.

Dimensions and profile

1.5" Type B Vented Roof Deck profile dimensions
1.5" Type B Vented Roof Deck dimensions
PropertyDimension
Profile Depth1.5 inches
Coverage Width36 inches
Rib Spacing6 inches (center to center)
Rib Height1.5 inches

Ideal for Lightweight Insulated Concrete (LWIC) applications, the 1.5" Type B Vented Deck has a rib depth of 1.5 inches and a standard coverage width of 36 inches. A 6 inch rib spacing (center to center) and a 39 inch overall width provide secure overlaps and strong composite action with concrete slabs. Perforations in the profile improve adhesion and help LWIC cure correctly, maximizing strength, durability, and efficiency.

Gauges and thicknesses

1.5" Type B Vented Roof Deck gauges
GaugeBare steel thickness (in)Weight (lbs/sq ft)Typical applications
220.02951.6Light-duty roofing and small spans.
200.03582Medium spans, roofing, and siding.
180.04742.6Heavy-duty applications.
160.05983Heavy load spans.

Type B Vented Deck can be ordered in gauges 22, 20, and 18, which differ in thickness and load capacity to fit the needs of each project. Lighter gauges (22 and 20) are cost-effective and best for shorter spans. The thicker 18 gauge brings greater structural strength to support longer spans and heavier loads. In insulated concrete applications, the perforated design strengthens the bond with LWIC for proper adhesion and curing.

Finishes and coatings

1.5" Type B Vented Roof Deck finishes
FinishDetails
Galvanized G60Zinc coating of 0.6 oz/ft². Recommended for general environments.
Galvanized G90Zinc coating of 0.9 oz/ft². Ideal for highly corrosive environments.
Prime-PaintedProvides a base coat for additional protection or paint adhesion.
Bare SteelUnfinished; typically for indoor use or controlled environments.

Both galvanized (G60 and G90) and prime-painted finishes are offered on the Type B Vented Deck for durability and long-term performance. G90 gives galvanized coatings extra protection in highly corrosive environments, and all galvanized options resist corrosion. For projects that need additional coatings, prime paint supplies a protective base coat. These finishes lengthen deck life and maintain performance in LWIC applications.

Material and finish options

Made from high-strength 50 KSI steel, the B 1.5" Vented Deck comes in several finishes: corrosion-resistant galvanized that meets ANSI/SDI standards, a variety of paints for tailored aesthetics, or bare steel for custom applications. These finishes are all designed to enhance durability and sustain performance in demanding environments.

Custom lengths

Lengths run from 6′-0″ on smaller projects to 40′-0″ on larger ones, and we supply all of them accurately and efficiently. Custom lengths are cut to your requirements for Melbourne projects, giving the best fit and minimal waste.

1.5" Type B Vented Roof Deck features

Airflow control, fire resistance, and lightweight durability define the 1.5" Type B Vented Deck, a good choice for commercial buildings that need ventilation and efficiency.

Optimized for LWIC Systems

Built to improve adhesion in Lightweight Insulated Concrete (LWIC) applications for proper bonding and structural performance.

Improved Concrete Bonding

Perforations strengthen the bond between the deck and lightweight concrete, giving a robust roof system with better load distribution.

Structural & Fire Performance

SDI and ANSI compliant, with high durability and fire-rated performance in LWIC systems.

LWIC Roofing Applications

A strong fit for Lightweight Insulated Concrete (LWIC) roof systems, with strength, adhesion, and long-term performance in insulated roofing.

Compliance with SDI Standards

Steel Deck Institute (SDI) and ANSI guidelines are met, which assures quality and code compliance.

Moisture Management

Helps prevent trapped moisture, which improves durability and lowers the risk of mold or corrosion.

Installation and connections

Installation practices

  • Run the deck perpendicular to the supports.
  • Attach the deck at every support by puddle weld or TEK screw.
  • Overlap the sidelaps and fasten with screws at 12" o.c.

Fasteners and attachments

  • 5/8" Diameter Puddle Welds
  • #10 TEK screws at 6" o.c. on edges, and 12" o.c. for sidelaps
  • Sidelaps attached using #10 TEK screws at 12" o.c.

Confirm the profile, gauge, span, loads and connections against your project drawings and the applicable product load tables before ordering.

Applications

Lightweight Concrete Systems

Lightweight Concrete Systems

For composite slabs in LWIC systems, perforations let moisture escape while the concrete cures, which improves bonding. Condensation stays from getting trapped, structural integrity improves, and the insulated concrete system lasts.

Moisture-Controlled Roof Assemblies

Moisture-Controlled Roof Assemblies

In lightweight insulated concrete (LWIC) applications, the perforated profile improves adhesion and curing. Moisture can release as the concrete cures, which protects long-term insulation performance and prevents structural degradation in humid environments.

Standards and product documentation

Melbourne projects specifying the 1.5" B Vented deck get a product that complies with SDI (Steel Deck Institute) specifications, which sets high standards for design and performance.

1.5" Type B Vented Roof Deck questions

Why does the vented Type B deck have perforations?

They improve airflow and moisture control, stop condensation from building up, and improve adhesion in lightweight concrete applications.

How does vented Type B deck help composite systems in Melbourne?

Small perforations strengthen the bond between deck and concrete for stronger composite action. They also let moisture escape, which lowers the chance of water getting trapped.

Can vented Type B deck be used in every roofing application?

Yes, though it helps most in moisture-sensitive settings such as vented roofing systems, where air circulation protects insulation from degradation and corrosion.

Which finishes come on the vented Type B deck?

Galvanized (G60/G90) provides corrosion resistance, and prime-painted finishes provide protection and work with additional coatings.

Do the perforations reduce the structural strength of the vented Type B deck?

No. They are placed strategically so the deck keeps its load capacity and still delivers ventilation benefits for specific applications.

Planning your order

Metal Roof Decks supply for Melbourne

Send your project drawings or material list so our team can review quantities, profile requirements and cut lengths. We can help with takeoffs and shop drawings, then confirm pricing and delivery options for your Melbourne project.

Send your drawings for a quote

Helpful details for an accurate quote

  • The profile, gauge and finish shown in your specifications.
  • Quantities and lengths, or the drawings we can take them off from.
  • The Melbourne job site address, your target delivery date and any access limits.
  • Load tables, attachment details or other documents your engineer specified.

How We Work

We Guide You Through the Process

From manufacturing to delivery, we ensure precision, efficiency, and compliance with industry standards.

01
01

Takeoff and Shop Drawings Services

We provide specialized takeoff services for accurate quotations and detailed shop drawings to produce optimized cutting lists for sheets, ensuring efficient execution and waste-free outcomes in your projects.

02
02

Manufacture

We manufacture metal decks to SDI and ANSI standards, ensuring strength, durability, and compliance. We provide custom lengths and high-precision fabrication for optimized performance in roof, floor, and form deck applications.

03
03

Swift Deliveries & Nationwide Reach

While based in South Florida, we serve clients nationwide, ensuring quality, efficiency, and timely deliveries across the U.S., reflecting our commitment to excellence without boundaries.

Frequently Asked Questions

Where can I buy metal roof deck in Melbourne?

Miami Metal Deck supplies metal roof deck to Melbourne with same-day or next-day delivery options. Call 305-760-2575 or request a quote online.

What types of roof deck are available?

We carry Type B (1.5" deep), Type N (3" deep), and Vented Type B roof deck in gauges 16–22 with G60 and G90 galvanized coatings.

Do you offer custom lengths?

Yes. We provide custom-cut lengths from 6 to 40 feet along with shop drawings and takeoff services to support your project.

What metal roof deck types can I order?

There are three: Type B (1.5" deep) for general commercial use, Type N (3" deep) for long spans, and Vented Type B Deck for projects where moisture control matters.

Type N or Type B roof deck for Melbourne projects?

Type N roof deck is the better fit for long-span work such as warehouses and industrial buildings that call for fewer supports. Type B is more typical for standard commercial and industrial roofing.

What does a vented Type B roof deck do?

It is made to control moisture, which makes Vented Type B Deck suitable for Lightweight Insulated Concrete (LWIC) applications.

Are galvanized or painted coatings offered?

Yes. All roof deck types come with galvanized coatings (G60, G90) to resist corrosion, or with primer-painted finishes for extra protection and coating compatibility.

Phone

305 760 25 75

E-Mail

info@mmdeck.com

Address

16000 NW 49th Ave Suite A, Miami Gardens, FL 33014

Get a Free Quote