SDI Member · ANSI/SDI compliant
Type BI inverted metal deck in Fort Myers
Type BI inverted form deck in Fort Myers for architectural ceilings and exposed underside applications in schools, offices, and commercial buildings.
Supplying Type BI Inverted Form Deck in Fort Myers
For job sites in Fort Myers, Miami Metal Deck provides Type BI Inverted Form Deck cut to length and ready for installation, serving Lee County and the Southwest Florida region. We ship to Fort Myers from Miami Gardens, offering 1-day service to major Florida cities and coordinating freight with your site schedule.
With Fort Myers's coastal humidity and salt air, many engineers specify a G90 galvanized finish for its heavier zinc coating; we confirm the finish against your project specifications. We supply to the gauges, lengths and finishes on your approved drawings, which are designed to the Florida Building Code requirements that apply in Lee County.
Product guide
Product specifications for your Fort Myers project
Compare profiles, dimensions, material options and applications to prepare your order. Select a product below to explore its technical details.
Type BI Inverted Form Deck
Architectural ceilings with an exposed soffit are what Type B Inverted Form Deck is designed for. It works as permanent formwork for concrete slabs in floors and roofs, in gauges 22 GA through 16 GA, and is a natural fit for Fort Myers commercial and institutional buildings.
Dimensions and profile
| Property | Dimension |
|---|---|
| Profile Depth | 1.5 inches |
| Coverage Width | 36 inches |
| Rib Spacing | 6 inches (center to center) |
| Rib Height | 1.5 inches |
Rib depth is 1.5 inches and standard coverage width is 36 inches on Type BI Inverted Form Deck. Install it with the ribs pointing upward and a smooth flat soffit remains exposed underneath, producing an architectural ceiling with no additional finishes. Ribs are 6 inches apart (center to center), which preserves structural integrity while allowing for concrete placement.
Gauges and thicknesses
| Gauge | Bare steel thickness (in) | Weight (lbs/sq ft) | Typical applications |
|---|---|---|---|
| 22 | 0.0299 | 1.25 | Light-duty floors and ceilings. |
| 20 | 0.0358 | 1.5 | Standard commercial floor systems. |
| 18 | 0.0474 | 2.6 | Heavy-duty applications, parking structures. |
| 16 | 0.0598 | 3.0 | Heavy load industrial floors. |
Gauges 22, 20, 18, and 16 are offered for Type BI Inverted Form Deck. For standard commercial work, the lighter gauges (22 and 20) are a good fit. Parking structures and heavy industrial floor systems call for the added strength of gauges 18 and 16.
Finishes and coatings
| Finish | Details |
|---|---|
| Galvanized G60 | Zinc coating of 0.6 oz/ft². Recommended for general environments. |
| Galvanized G90 | Zinc coating of 0.9 oz/ft². Ideal for highly corrosive environments. |
| Prime-Painted | Provides a base coat for additional protection or paint adhesion. |
| Bare Steel | Unfinished; typically for indoor use or controlled environments. |
Galvanized (G60 and G90) and prime-painted finishes are available for Type BI Inverted Form Deck. Galvanizing resists corrosion, and G90 adds protection in highly corrosive environments. G60 and G90 finishes conform to ASTM A653.
Material and finish options
Specify Type BI Inverted Form Deck in high-strength steel with a corrosion-resistant galvanized finish that meets ANSI/SDI standards. Painted finishes are available for tailored aesthetics, and bare steel is available for custom applications. Durability and steady performance are the goals behind each finish.
Custom lengths
Need 6′-0″ lengths for a small project or spans up to 40′-0″ for a large one? We handle both. Our custom length service is built around your requirements for Fort Myers and beyond, so the deck fits optimally and waste stays minimal.
Type BI Inverted Form Deck features
Choose Type BI Inverted Form Deck for strong structure, efficient formwork, and corrosion-resistant finishes. It is well matched to architectural ceilings, multi-level parking structures, and commercial floor systems with exposed soffits.
High Structural Strength
It carries concrete and live loads, and the underside becomes an architecturally finished exposed ceiling.
Efficient Formwork
Because the deck stays in place as permanent formwork for concrete slabs, labor and construction time drop and temporary forms never need removing.
Corrosion Resistance
For lasting corrosion resistance in commercial environments, choose G60/G90 galvanized or prime-painted finishes.
Cost-Effective
By combining formwork with structural support, it lowers material and labor costs where ceilings are left exposed.
Compliance with Standards
Conforms to SDI and ANSI guidelines for quality and code compliance in all applications.
Versatile Options
Gauges from 22 to 16 GA and multiple finishes are available to meet varying load and architectural needs.
Installation and connections
Installation practices
- Set the deck perpendicular to the supports with the ribs pointing upward.
- Use pins, powder-actuated fasteners, or TEK screws to fasten at each support.
- Lap sidelaps and secure them at 12" o.c. with button punching or screws.
Fasteners and attachments
- Pins or powder-actuated fasteners secure the deck to supports
- #10 TEK screws at 6" o.c. on edges
- Sidelaps attached through button punching or #10 TEK screws at 12" o.c.
Confirm the profile, gauge, span, loads and connections against your project drawings and the applicable product load tables before ordering.
Applications
Industrial Flooring with Exposed Ceiling
Industrial floor systems get strong support, and the soffit below is architecturally finished and exposed. It is a good match for schools, offices, and civic buildings.
Multi-Level Parking Structures
Parking garage construction commonly uses it. It supplies permanent formwork and leaves a clean exposed underside, which reduces finishing costs.
Standards and product documentation
Type BI Inverted Form Deck meets SDI (Steel Deck Institute) specifications and ANSI standards, supporting solid design and performance on Fort Myers jobs.
Type BI Inverted Form Deck questions
Where is Type BI inverted form deck used?
Typical uses are architectural ceiling systems, multi-level parking structures, schools, offices, and other facilities that need an attractive exposed soffit.
What makes Type BI installation different from standard form deck?
It goes in inverted, with ribs pointing upward. The flat side then faces down as a finished ceiling, so no extra finishing materials are needed.
Which gauges are offered?
Gauges 22, 20, 18, and 16 GA, so you can match different structural requirements.
Which finishes can I choose?
G60 and G90 galvanized finishes give corrosion resistance, and prime-painted finishes add protection.
Is Type BI available in custom lengths for Fort Myers projects?
Yes. Custom lengths from 6'-0" to 40'-0" give a precise fit with little waste.
Planning your order
Type BI Inverted Form Deck supply for Fort Myers
Send your project drawings or material list so our team can review quantities, profile requirements and cut lengths. We can help with takeoffs and shop drawings, then confirm pricing and delivery options for your Fort Myers project.
Send your drawings for a quoteHelpful details for an accurate quote
- The profile, gauge and finish shown in your specifications.
- Quantities and lengths, or the drawings we can take them off from.
- The Fort Myers job site address, your target delivery date and any access limits.
- Load tables, attachment details or other documents your engineer specified.
How We Work
We Guide You Through the Process
From manufacturing to delivery, we ensure precision, efficiency, and compliance with industry standards.
Takeoff and Shop Drawings Services
We provide specialized takeoff services for accurate quotations and detailed shop drawings to produce optimized cutting lists for sheets, ensuring efficient execution and waste-free outcomes in your projects.
Manufacture
We manufacture metal decks to SDI and ANSI standards, ensuring strength, durability, and compliance. We provide custom lengths and high-precision fabrication for optimized performance in roof, floor, and form deck applications.
Swift Deliveries & Nationwide Reach
While based in South Florida, we serve clients nationwide, ensuring quality, efficiency, and timely deliveries across the U.S., reflecting our commitment to excellence without boundaries.
Frequently Asked Questions
Do you deliver Type BI deck to Fort Myers?
Yes. We supply Type BI inverted form deck to Fort Myers. Call 305-760-2575 for a free quote.
What applications use inverted form deck?
Type BI is used in architectural ceiling systems, multi-level parking structures, schools, and offices where an attractive exposed soffit is required.