SDI Member · ANSI/SDI compliant
Type BI inverted metal deck in Panama City
Type BI inverted form deck in Panama City for architectural ceilings and exposed underside applications in schools, offices, and commercial buildings.
Type BI Inverted Form Deck for Panama City job sites
Miami Metal Deck supplies Type BI Inverted Form Deck to contractors, erectors and fabricators building in Panama City and across Bay County and the North Florida / Panhandle region. Orders for Panama City ship from our Miami Gardens facility, with 1-day service to major Florida cities and delivery scheduled around your erection sequence.
Salt air and humidity near the coast in Panama City favor heavier zinc coatings such as G90 galvanized. We match the finish to what your drawings call for. We supply to the gauges, lengths and finishes on your approved drawings, which are designed to the Florida Building Code requirements that apply in Bay County.
Product guide
Product specifications for your Panama City project
Compare profiles, dimensions, material options and applications to prepare your order. Select a product below to explore its technical details.
Type BI Inverted Form Deck
Exposed-soffit architectural ceilings call for Type B Inverted Form Deck, which also acts as permanent formwork for concrete slabs in floor and roof systems. Gauges range from 22 GA through 16 GA. Schools, offices, and commercial facilities in Panama City are among its common uses.
Dimensions and profile
| Property | Dimension |
|---|---|
| Profile Depth | 1.5 inches |
| Coverage Width | 36 inches |
| Rib Spacing | 6 inches (center to center) |
| Rib Height | 1.5 inches |
Rib depth on Type BI Inverted Form Deck is 1.5 inches, and standard coverage width is 36 inches. The ribs point up when installed, which leaves a smooth flat soffit below that serves as an architectural ceiling without further finishes. A 6-inch rib spacing (center to center) maintains structural integrity and allows for concrete placement.
Gauges and thicknesses
| Gauge | Bare steel thickness (in) | Weight (lbs/sq ft) | Typical applications |
|---|---|---|---|
| 22 | 0.0299 | 1.25 | Light-duty floors and ceilings. |
| 20 | 0.0358 | 1.5 | Standard commercial floor systems. |
| 18 | 0.0474 | 2.6 | Heavy-duty applications, parking structures. |
| 16 | 0.0598 | 3.0 | Heavy load industrial floors. |
Gauges 22, 20, 18, and 16 are offered for Type BI Inverted Form Deck. For standard commercial work, the lighter gauges (22 and 20) are a good fit. Parking structures and heavy industrial floor systems call for the added strength of gauges 18 and 16.
Finishes and coatings
| Finish | Details |
|---|---|
| Galvanized G60 | Zinc coating of 0.6 oz/ft². Recommended for general environments. |
| Galvanized G90 | Zinc coating of 0.9 oz/ft². Ideal for highly corrosive environments. |
| Prime-Painted | Provides a base coat for additional protection or paint adhesion. |
| Bare Steel | Unfinished; typically for indoor use or controlled environments. |
Type BI Inverted Form Deck ships in galvanized (G60 and G90) and prime-painted finishes. Galvanized coatings give corrosion resistance, and G90 gives extra protection in highly corrosive environments. G60 and G90 finishes conform to ASTM A653 specifications.
Material and finish options
Specify Type BI Inverted Form Deck in high-strength steel with a corrosion-resistant galvanized finish that meets ANSI/SDI standards. Painted finishes are available for tailored aesthetics, and bare steel is available for custom applications. Durability and steady performance are the goals behind each finish.
Custom lengths
Need 6′-0″ lengths for a small project or spans up to 40′-0″ for a large one? We handle both. Our custom length service is built around your requirements for Panama City and beyond, so the deck fits optimally and waste stays minimal.
Type BI Inverted Form Deck features
Type BI Inverted Form Deck offers high structural strength, efficient formwork, and corrosion-resistant finishes. It fits architectural ceilings, multi-level parking structures, and commercial floor systems that need exposed soffits.
High Structural Strength
It carries concrete and live loads, and the underside becomes an architecturally finished exposed ceiling.
Efficient Formwork
Because the deck stays in place as permanent formwork for concrete slabs, labor and construction time drop and temporary forms never need removing.
Corrosion Resistance
For lasting corrosion resistance in commercial environments, choose G60/G90 galvanized or prime-painted finishes.
Cost-Effective
By combining formwork with structural support, it lowers material and labor costs where ceilings are left exposed.
Compliance with Standards
Conforms to SDI and ANSI guidelines for quality and code compliance in all applications.
Versatile Options
Gauges from 22 to 16 GA and multiple finishes are available to meet varying load and architectural needs.
Installation and connections
Installation practices
- Set the deck perpendicular to the supports with the ribs pointing upward.
- Use pins, powder-actuated fasteners, or TEK screws to fasten at each support.
- Lap sidelaps and secure them at 12" o.c. with button punching or screws.
Fasteners and attachments
- Pins or powder-actuated fasteners secure the deck to supports
- #10 TEK screws at 6" o.c. on edges
- Sidelaps attached through button punching or #10 TEK screws at 12" o.c.
Confirm the profile, gauge, span, loads and connections against your project drawings and the applicable product load tables before ordering.
Applications
Industrial Flooring with Exposed Ceiling
Industrial floor systems gain strong support, and the architecturally finished exposed soffit makes it ideal for schools, offices, and civic buildings.
Multi-Level Parking Structures
Parking garages often use it for permanent formwork with a clean exposed underside, which lowers finishing costs.
Standards and product documentation
Type BI Inverted Form Deck complies with SDI (Steel Deck Institute) specifications and ANSI standards, which keeps design and performance standards high for projects in Panama City.
Type BI Inverted Form Deck questions
Where is Type BI inverted form deck used?
Typical uses are architectural ceiling systems, multi-level parking structures, schools, offices, and other facilities that need an attractive exposed soffit.
What makes Type BI installation different from standard form deck?
It goes in inverted, with ribs pointing upward. The flat side then faces down as a finished ceiling, so no extra finishing materials are needed.
Which gauges are offered?
Gauges 22, 20, 18, and 16 GA, so you can match different structural requirements.
Which finishes can I choose?
G60 and G90 galvanized finishes give corrosion resistance, and prime-painted finishes add protection.
Is Type BI available in custom lengths for Panama City projects?
Yes. Custom lengths from 6'-0" to 40'-0" give a precise fit with little waste.
Planning your order
Type BI Inverted Form Deck supply for Panama City
Send your project drawings or material list so our team can review quantities, profile requirements and cut lengths. We can help with takeoffs and shop drawings, then confirm pricing and delivery options for your Panama City project.
Send your drawings for a quoteHelpful details for an accurate quote
- The profile, gauge and finish shown in your specifications.
- Quantities and lengths, or the drawings we can take them off from.
- The Panama City job site address, your target delivery date and any access limits.
- Load tables, attachment details or other documents your engineer specified.
How We Work
We Guide You Through the Process
From manufacturing to delivery, we ensure precision, efficiency, and compliance with industry standards.
Takeoff and Shop Drawings Services
We provide specialized takeoff services for accurate quotations and detailed shop drawings to produce optimized cutting lists for sheets, ensuring efficient execution and waste-free outcomes in your projects.
Manufacture
We manufacture metal decks to SDI and ANSI standards, ensuring strength, durability, and compliance. We provide custom lengths and high-precision fabrication for optimized performance in roof, floor, and form deck applications.
Swift Deliveries & Nationwide Reach
While based in South Florida, we serve clients nationwide, ensuring quality, efficiency, and timely deliveries across the U.S., reflecting our commitment to excellence without boundaries.
Frequently Asked Questions
Do you deliver Type BI deck to Panama City?
Yes. We supply Type BI inverted form deck to Panama City. Call 305-760-2575 for a free quote.
What applications use inverted form deck?
Type BI is used in architectural ceiling systems, multi-level parking structures, schools, and offices where an attractive exposed soffit is required.