SDI Member · ANSI/SDI compliant
Type BI inverted metal deck in Vero Beach
Type BI inverted form deck in Vero Beach for architectural ceilings and exposed underside applications in schools, offices, and commercial buildings.
Local Type BI Inverted Form Deck supply for Vero Beach
Miami Metal Deck supplies Type BI Inverted Form Deck to contractors, erectors and fabricators building in Vero Beach and across Indian River County and the Space & Treasure Coasts region. We ship to Vero Beach from Miami Gardens, offering 1-day service to major Florida cities and coordinating freight with your site schedule.
Salt air and humidity near the coast in Vero Beach favor heavier zinc coatings such as G90 galvanized. We match the finish to what your drawings call for. We supply to the gauges, lengths and finishes on your approved drawings, which are designed to the Florida Building Code requirements that apply in Indian River County.
Product guide
Product specifications for your Vero Beach project
Compare profiles, dimensions, material options and applications to prepare your order. Select a product below to explore its technical details.
Type BI Inverted Form Deck
Type B Inverted Form Deck is permanent formwork for concrete slabs in floor and roof systems, offered in gauges 22 GA through 16 GA. It was designed for architectural ceilings where the soffit stays exposed, and Vero Beach schools, offices, and commercial buildings are typical uses.
Dimensions and profile
| Property | Dimension |
|---|---|
| Profile Depth | 1.5 inches |
| Coverage Width | 36 inches |
| Rib Spacing | 6 inches (center to center) |
| Rib Height | 1.5 inches |
Type BI Inverted Form Deck has a 1.5-inch rib depth and a standard 36-inch coverage width. Ribs face upward when it is installed, so a smooth, flat soffit shows below and works as an architectural ceiling with no added finish. Rib spacing of 6 inches (center to center) keeps the structure sound and still accommodates concrete placement.
Gauges and thicknesses
| Gauge | Bare steel thickness (in) | Weight (lbs/sq ft) | Typical applications |
|---|---|---|---|
| 22 | 0.0299 | 1.25 | Light-duty floors and ceilings. |
| 20 | 0.0358 | 1.5 | Standard commercial floor systems. |
| 18 | 0.0474 | 2.6 | Heavy-duty applications, parking structures. |
| 16 | 0.0598 | 3.0 | Heavy load industrial floors. |
Gauges 22, 20, 18, and 16 are offered for Type BI Inverted Form Deck. For standard commercial work, the lighter gauges (22 and 20) are a good fit. Parking structures and heavy industrial floor systems call for the added strength of gauges 18 and 16.
Finishes and coatings
| Finish | Details |
|---|---|
| Galvanized G60 | Zinc coating of 0.6 oz/ft². Recommended for general environments. |
| Galvanized G90 | Zinc coating of 0.9 oz/ft². Ideal for highly corrosive environments. |
| Prime-Painted | Provides a base coat for additional protection or paint adhesion. |
| Bare Steel | Unfinished; typically for indoor use or controlled environments. |
Type BI Inverted Form Deck ships in galvanized (G60 and G90) and prime-painted finishes. Galvanized coatings give corrosion resistance, and G90 gives extra protection in highly corrosive environments. G60 and G90 finishes conform to ASTM A653 specifications.
Material and finish options
Specify Type BI Inverted Form Deck in high-strength steel with a corrosion-resistant galvanized finish that meets ANSI/SDI standards. Painted finishes are available for tailored aesthetics, and bare steel is available for custom applications. Durability and steady performance are the goals behind each finish.
Custom lengths
Need 6′-0″ lengths for a small project or spans up to 40′-0″ for a large one? We handle both. Our custom length service is built around your requirements for Vero Beach and beyond, so the deck fits optimally and waste stays minimal.
Type BI Inverted Form Deck features
Type BI Inverted Form Deck offers high structural strength, efficient formwork, and corrosion-resistant finishes. It fits architectural ceilings, multi-level parking structures, and commercial floor systems that need exposed soffits.
High Structural Strength
Carries concrete and live loads and also gives you a finished, exposed ceiling surface.
Efficient Formwork
As permanent formwork for concrete slabs, it saves labor and construction time because no temporary forms need to be removed.
Corrosion Resistance
G60/G90 galvanized or prime-painted finishes hold up against corrosion in commercial environments.
Cost-Effective
One product handles both formwork and structural support, which lowers material and labor costs for exposed ceilings.
Compliance with Standards
SDI and ANSI guidelines are met, so quality and code compliance carry across applications.
Versatile Options
A choice of gauges (22–16 GA) and finishes covers different load requirements and architectural specifications.
Installation and connections
Installation practices
- Lay the deck perpendicular to the supports, ribs pointing upward.
- At each support, fasten with pins, powder-actuated fasteners, or TEK screws.
- Lap the sidelaps and secure them with button punching or screws at 12" o.c.
Fasteners and attachments
- Pins or powder-actuated fasteners hold the deck to the supports
- #10 TEK screws at 6" o.c. on edges
- Sidelaps fastened using button punching or #10 TEK screws at 12" o.c.
Confirm the profile, gauge, span, loads and connections against your project drawings and the applicable product load tables before ordering.
Applications
Industrial Flooring with Exposed Ceiling
Industrial floor systems get strong support, and the soffit below is architecturally finished and exposed. It is a good match for schools, offices, and civic buildings.
Multi-Level Parking Structures
Parking garage construction commonly uses it. It supplies permanent formwork and leaves a clean exposed underside, which reduces finishing costs.
Standards and product documentation
Type BI Inverted Form Deck meets SDI (Steel Deck Institute) specifications and ANSI standards, supporting solid design and performance on Vero Beach jobs.
Type BI Inverted Form Deck questions
What is Type BI inverted form deck used for?
Architectural ceiling systems, multi-level parking structures, schools, offices, and any facility where an attractive exposed soffit is wanted.
How does installing Type BI differ from standard form deck?
Type BI is laid inverted with the ribs up. That leaves the flat side exposed below as a finished ceiling, with no extra finishing materials.
Which gauges does Type BI come in?
22, 20, 18, and 16 GA, giving options for different structural requirements.
What finishes does Type BI come with?
G60 and G90 galvanized finishes resist corrosion, and prime-painted finishes provide extra protection.
Can I get Type BI cut to length in Vero Beach?
Yes, custom lengths from 6'-0" to 40'-0" are available, ensuring a precise fit and minimal waste.
Planning your order
Type BI Inverted Form Deck supply for Vero Beach
Send your project drawings or material list so our team can review quantities, profile requirements and cut lengths. We can help with takeoffs and shop drawings, then confirm pricing and delivery options for your Vero Beach project.
Send your drawings for a quoteWhat we need to quote your project
- The profile, gauge and finish shown in your specifications.
- Quantities and lengths, or the drawings we can take them off from.
- The Vero Beach job site address, your target delivery date and any access limits.
- Load tables, attachment details or other documents your engineer specified.
How We Work
We Guide You Through the Process
From manufacturing to delivery, we ensure precision, efficiency, and compliance with industry standards.
Takeoff and Shop Drawings Services
We provide specialized takeoff services for accurate quotations and detailed shop drawings to produce optimized cutting lists for sheets, ensuring efficient execution and waste-free outcomes in your projects.
Manufacture
We manufacture metal decks to SDI and ANSI standards, ensuring strength, durability, and compliance. We provide custom lengths and high-precision fabrication for optimized performance in roof, floor, and form deck applications.
Swift Deliveries & Nationwide Reach
While based in South Florida, we serve clients nationwide, ensuring quality, efficiency, and timely deliveries across the U.S., reflecting our commitment to excellence without boundaries.
Frequently Asked Questions
Do you deliver Type BI deck to Vero Beach?
Yes. We supply Type BI inverted form deck to Vero Beach. Call 305-760-2575 for a free quote.
What applications use inverted form deck?
Type BI is used in architectural ceiling systems, multi-level parking structures, schools, and offices where an attractive exposed soffit is required.