SDI Member · ANSI/SDI compliant
Type BI inverted metal deck in Melbourne
Type BI inverted form deck in Melbourne for architectural ceilings and exposed underside applications in schools, offices, and commercial buildings.
Local Type BI Inverted Form Deck supply for Melbourne
For job sites in Melbourne, Miami Metal Deck provides Type BI Inverted Form Deck cut to length and ready for installation, serving Brevard County and the Space & Treasure Coasts region. Deliveries to Melbourne leave our Miami Gardens facility on a schedule set with your team, with 1-day service available to major Florida cities.
Salt air and humidity near the coast in Melbourne favor heavier zinc coatings such as G90 galvanized. We match the finish to what your drawings call for. We supply to the gauges, lengths and finishes on your approved drawings, which are designed to the Florida Building Code requirements that apply in Brevard County.
Product guide
Product specifications for your Melbourne project
Compare profiles, dimensions, material options and applications to prepare your order. Select a product below to explore its technical details.
Type BI Inverted Form Deck
Exposed-soffit architectural ceilings call for Type B Inverted Form Deck, which also acts as permanent formwork for concrete slabs in floor and roof systems. Gauges range from 22 GA through 16 GA. Schools, offices, and commercial facilities in Melbourne are among its common uses.
Dimensions and profile
| Property | Dimension |
|---|---|
| Profile Depth | 1.5 inches |
| Coverage Width | 36 inches |
| Rib Spacing | 6 inches (center to center) |
| Rib Height | 1.5 inches |
Rib depth is 1.5 inches and standard coverage width is 36 inches on Type BI Inverted Form Deck. Install it with the ribs pointing upward and a smooth flat soffit remains exposed underneath, producing an architectural ceiling with no additional finishes. Ribs are 6 inches apart (center to center), which preserves structural integrity while allowing for concrete placement.
Gauges and thicknesses
| Gauge | Bare steel thickness (in) | Weight (lbs/sq ft) | Typical applications |
|---|---|---|---|
| 22 | 0.0299 | 1.25 | Light-duty floors and ceilings. |
| 20 | 0.0358 | 1.5 | Standard commercial floor systems. |
| 18 | 0.0474 | 2.6 | Heavy-duty applications, parking structures. |
| 16 | 0.0598 | 3.0 | Heavy load industrial floors. |
The gauge lineup for Type BI Inverted Form Deck is 22, 20, 18, and 16. Standard commercial applications suit the lighter gauges (22 and 20). When you need more strength for parking structures or heavy industrial floor systems, use gauges 18 and 16.
Finishes and coatings
| Finish | Details |
|---|---|
| Galvanized G60 | Zinc coating of 0.6 oz/ft². Recommended for general environments. |
| Galvanized G90 | Zinc coating of 0.9 oz/ft². Ideal for highly corrosive environments. |
| Prime-Painted | Provides a base coat for additional protection or paint adhesion. |
| Bare Steel | Unfinished; typically for indoor use or controlled environments. |
Type BI Inverted Form Deck ships in galvanized (G60 and G90) and prime-painted finishes. Galvanized coatings give corrosion resistance, and G90 gives extra protection in highly corrosive environments. G60 and G90 finishes conform to ASTM A653 specifications.
Material and finish options
Specify Type BI Inverted Form Deck in high-strength steel with a corrosion-resistant galvanized finish that meets ANSI/SDI standards. Painted finishes are available for tailored aesthetics, and bare steel is available for custom applications. Durability and steady performance are the goals behind each finish.
Custom lengths
Lengths begin at 6′-0″ for smaller projects and extend to 40′-0″ for larger ones. We supply the dimensions you specify, so the deck fits well and offcuts stay minimal.
Type BI Inverted Form Deck features
Choose Type BI Inverted Form Deck for strong structure, efficient formwork, and corrosion-resistant finishes. It is well matched to architectural ceilings, multi-level parking structures, and commercial floor systems with exposed soffits.
High Structural Strength
Supports concrete and live loads while presenting an architecturally finished ceiling surface from below.
Efficient Formwork
Permanent formwork for concrete slabs means less labor and shorter construction time, since there are no temporary forms to strip.
Corrosion Resistance
Durable corrosion resistance in commercial settings comes from G60/G90 galvanized or prime-painted finishes.
Cost-Effective
Formwork and structural support in a single product trim material and labor costs on exposed ceiling work.
Compliance with Standards
Built to SDI and ANSI guidelines, giving quality and code compliance in every application.
Versatile Options
Several gauges (22–16 GA) and finishes address varied load requirements and architectural specifications.
Installation and connections
Installation practices
- Install the deck with ribs facing up, perpendicular to the supports.
- Fasten at every support with pins, powder-actuated fasteners, or TEK screws.
- Overlap sidelaps and fasten with button punching or screws at 12" o.c.
Fasteners and attachments
- Deck is secured to supports with pins or powder-actuated fasteners
- #10 TEK screws at 6" o.c. on edges
- Sidelaps are attached with button punching or #10 TEK screws at 12" o.c.
Confirm the profile, gauge, span, loads and connections against your project drawings and the applicable product load tables before ordering.
Applications
Industrial Flooring with Exposed Ceiling
Industrial floor systems get strong support, and the soffit below is architecturally finished and exposed. It is a good match for schools, offices, and civic buildings.
Multi-Level Parking Structures
Parking garage construction commonly uses it. It supplies permanent formwork and leaves a clean exposed underside, which reduces finishing costs.
Standards and product documentation
Type BI Inverted Form Deck complies with SDI (Steel Deck Institute) specifications and ANSI standards, which keeps design and performance standards high for projects in Melbourne.
Type BI Inverted Form Deck questions
Which projects use Type BI inverted form deck?
It appears in architectural ceiling systems, multi-level parking structures, schools, offices, and facilities needing an attractive exposed soffit.
What is different about installing Type BI?
The deck is installed inverted, ribs up, so the flat side faces down as a finished ceiling surface and needs no added finishing materials.
What gauge options exist?
Gauges 22, 20, 18, and 16 GA cover a range of structural requirements.
What finish options are there?
Corrosion resistance comes from G60 and G90 galvanized finishes, and prime-painted finishes add protection.
Does Type BI come in custom lengths for Melbourne jobs?
Yes, from 6'-0" to 40'-0", so each project gets a precise fit with minimal waste.
Planning your order
Type BI Inverted Form Deck supply for Melbourne
Send your project drawings or material list so our team can review quantities, profile requirements and cut lengths. We can help with takeoffs and shop drawings, then confirm pricing and delivery options for your Melbourne project.
Send your drawings for a quoteWhat we need to quote your project
- The profile, gauge and finish shown in your specifications.
- Quantities and lengths, or the drawings we can take them off from.
- The Melbourne job site address, your target delivery date and any access limits.
- Load tables, attachment details or other documents your engineer specified.
How We Work
We Guide You Through the Process
From manufacturing to delivery, we ensure precision, efficiency, and compliance with industry standards.
Takeoff and Shop Drawings Services
We provide specialized takeoff services for accurate quotations and detailed shop drawings to produce optimized cutting lists for sheets, ensuring efficient execution and waste-free outcomes in your projects.
Manufacture
We manufacture metal decks to SDI and ANSI standards, ensuring strength, durability, and compliance. We provide custom lengths and high-precision fabrication for optimized performance in roof, floor, and form deck applications.
Swift Deliveries & Nationwide Reach
While based in South Florida, we serve clients nationwide, ensuring quality, efficiency, and timely deliveries across the U.S., reflecting our commitment to excellence without boundaries.
Frequently Asked Questions
Do you deliver Type BI deck to Melbourne?
Yes. We supply Type BI inverted form deck to Melbourne. Call 305-760-2575 for a free quote.
What applications use inverted form deck?
Type BI is used in architectural ceiling systems, multi-level parking structures, schools, and offices where an attractive exposed soffit is required.