SDI Member · ANSI/SDI compliant
Steel Deck Supplier in Cape Coral
High-performance steel deck in Cape Coral for durable, efficient structures. Roof deck, composite floor deck, and form deck.
Steel Deck for Cape Coral job sites
Miami Metal Deck supplies Steel Deck to contractors, erectors and fabricators building in Cape Coral and across Lee County and the Southwest Florida region. Orders for Cape Coral ship from our Miami Gardens facility, with 1-day service to major Florida cities and delivery scheduled around your erection sequence.
Coastal conditions around Cape Coral make corrosion protection a priority, and G90 galvanized steel is a common choice there. Our team checks the specified finish before we quote. We supply to the gauges, lengths and finishes on your approved drawings, which are designed to the Florida Building Code requirements that apply in Lee County.
Product guide
Product specifications for your Cape Coral project
Compare profiles, dimensions, material options and applications to prepare your order. Select a product below to explore its technical details.
1.5" Type B Roof Deck
Looking for a 1.5" Type B metal deck supplier for projects in Cape Coral? This roof deck delivers strong structural performance and goes in quickly. It comes in 22 GA to 16 GA, meets SDI and ANSI standards, and ships in galvanized finishes such as G60 and G90 for added durability and corrosion resistance on Cape Coral roofing jobs.
Dimensions and profile
| Property | Dimension |
|---|---|
| Profile Depth | 1.5 inches |
| Coverage Width | 36 inches |
| Rib Spacing | 6 inches (center to center) |
| Rib Height | 1.5 inches |
This 1.5" Type B metal deck has a 1.5 inch rib depth and a standard coverage width of 36 inches, which makes it structurally efficient for roofing and flooring. Ribs sit 6 inches apart (center to center), and the 39 inch overall material width gives secure overlaps and strong composite action with concrete slabs. The profile maximizes strength at minimal weight, so it works across many kinds of construction.
Gauges and thicknesses
| Gauge | Bare steel thickness (in) | Weight (lbs/sq ft) | Typical applications |
|---|---|---|---|
| 22 | 0.0295 | 1.6 | Light-duty roofing and small spans. |
| 20 | 0.0358 | 2 | Medium spans, roofing, and siding. |
| 18 | 0.0474 | 2.6 | Heavy-duty applications. |
| 16 | 0.0598 | 3 | Heavy load spans. |
There are four gauges to choose from for Type B deck: 22, 20, 18, and 16. Each has different thickness and load capacity, so you can fit the deck to the project. Light and cost-effective, 22 and 20 gauge are best on shorter spans and lighter loads. Stronger 18 and 16 gauge carry longer spans and heavier loads, which makes them ideal for demanding applications.
Finishes and coatings
| Finish | Details |
|---|---|
| Galvanized G60 | Zinc coating of 0.6 oz/ft². Recommended for general environments. |
| Galvanized G90 | Zinc coating of 0.9 oz/ft². Ideal for highly corrosive environments. |
| Prime-Painted | Provides a base coat for additional protection or paint adhesion. |
| Bare Steel | Unfinished; typically for indoor use or controlled environments. |
Type B deck is produced with several finishes for long service life, including galvanized (G60 and G90) and prime-painted. Galvanizing resists corrosion well, and G90 carries a heavier zinc coating for settings with more moisture or chemical exposure. Prime paint supplies a base coat for projects that will receive additional paint or coatings.
Material and finish options
Material grades include high-strength steel at 33 KSI, 40 KSI, 50 KSI, and 80 KSI. Each grade answers a specific structural need and strikes a balance between strength and flexibility. Galvanized (G60/G90) and prime-painted finishes both follow ASTM A653 specifications for corrosion resistance.
Custom lengths
From 6′-0″ pieces on smaller projects to spans of 40′-0″ on larger ones, we handle every dimension with precision and efficiency. Our custom length service is built around your specifications, so the deck fits well and little material is wasted on Cape Coral jobs.
1.5" Type B Roof Deck features
Our 1.5" Type B metal deck combines light weight with durability, fire resistance, and a sustainable design. It suits efficient short-span commercial work and eco-conscious building programs.
High Strength-to-Weight Ratio
Exceptional load capacity at low weight suits roofing systems well.
Standard 36 inches Coverage
Coverage is 36 inches wide with a consistent rib design, so installation takes less time and runs more efficiently.
Galvanized or Prime-Painted Finish
Galvanized G60/G90 or prime-painted: either finish improves durability and resists corrosion.
Compatibility with Roofing Systems
Fits roofing systems that use insulation, waterproofing, reflective coatings, drainage, ventilation, and other components.
Compliance with Standards
Steel Deck Institute (SDI) and ANSI guidelines are met, which assures quality and code compliance.
Wide Gauge Range
Choose 22, 20, 18, or 16 gauge to customize the deck for specific load-bearing requirements and project demands.
Installation and connections
Installation practices
- Place the deck perpendicular to the supports.
- Secure the deck to each support using puddle welds or TEK screws.
- Overlap the sidelaps, then screw them down at 12" o.c.
Fasteners and attachments
- 5/8" Diameter Puddle Welds
- #10 TEK screws at 6" o.c. on edges, and 12" o.c. for sidelaps
- Sidelaps attached using #10 TEK screws at 12" o.c.
Confirm the profile, gauge, span, loads and connections against your project drawings and the applicable product load tables before ordering.
Applications
Roof Deck Applications
Commercial and industrial roof systems that demand structural strength and durability rely heavily on Type B. It carries roofing insulation systems and works for vented as well as non-vented roofs.
Hybrid Structural-Ceiling Systems
Type B can also serve as an exposed ceiling in architectural spaces. It gives structural strength and a clean look while trimming extra materials and installation time.
Standards and product documentation
SDI (Steel Deck Institute) specifications are met by the 1.5" Type B deck, supporting high standards for design and performance in Cape Coral and beyond.
1.5" Type B Roof Deck questions
What gauge do most buyers choose for Type B decking?
20 gauge is typically the most common, because it offers a good balance of cost and strength for ordinary applications. Some projects need a different gauge based on their requirements.
What separates G60 from G90 galvanized finishes?
The coating on G60 is 0.60 oz/ft² versus 0.90 oz/ft² on G90. That makes G90 50% heavier in zinc and more corrosion resistant. G60 works for indoor applications or low-moisture environments, while G90 is better for outdoor use, roofing, steel decking, and structures facing weather, humidity, or corrosive conditions.
What are the maximum spans of the 1.5" Type B deck?
The answer depends on gauge, span type, and loading. For instance, 22-gauge deck spans up to 8 feet in multiple spans, and 16-gauge deck spans up to 14 feet. For exact numbers, refer to the load tables.
Can I get 1.5" Type B metal decking customized for my Cape Coral project?
Yes, gauge, finish, and length are all customizable. Lengths are cut to project needs, so there is less waste and installation goes more efficiently.
Do 1.5" Type B metal decking products meet industry standards?
Yes, they do. The deck follows Steel Deck Institute (SDI) standards and American Iron and Steel Institute (AISI) design guidelines, ensuring quality, safety, and compatibility with construction codes.
3" Type N Roof Deck
Long spans and structural strength make 3" Type N metal deck a popular roof deck. Its profile is 3 inches deep and is offered in 22 GA to 16 GA, which gives roofing contractors in Cape Coral room to match gauge to project. The deck meets SDI and ANSI standards, and galvanized finishes such as G60 and G90 are available.
Dimensions and profile
| Property | Dimension |
|---|---|
| Profile Depth | 3 inches |
| Coverage Width | 24 inches |
| Rib Spacing | 8 inches (center to center) |
| Rib Height | 3 inches |
Measuring 3 inches in profile depth, the Type N Roof Deck covers 24 inches per sheet. Its rib spacing is 8 inches (center to center) and its rib height is 3 inches. This deep-rib design is built for longer spans and heavy roofing loads, while the 24 inch coverage keeps installation straightforward.
Gauges and thicknesses
| Gauge | Bare steel thickness (in) | Weight (lbs/sq ft) | Typical applications |
|---|---|---|---|
| 22 | 0.0295 | 1.8 | Light duty roofs. |
| 20 | 0.0358 | 2.2 | Standard commercial roofs. |
| 18 | 0.0474 | 2.9 | Heavy load areas. |
| 16 | 0.0598 | 3.7 | Long spans, high loads. |
Gauges for Type N deck include 22, 20, 18, and 16, giving a spread of thicknesses and load capacities for each project. Lightweight, cost-effective 22 and 20 gauge fit shorter spans and lighter loads. For demanding applications, 18 and 16 gauge deliver greater structural strength and support longer spans and heavier loads.
Finishes and coatings
| Finish | Details |
|---|---|
| Galvanized G60 | Zinc coating of 0.6 oz/ft². Recommended for general environments. |
| Galvanized G90 | Zinc coating of 0.9 oz/ft². Ideal for highly corrosive environments. |
| Prime-Painted | Provides a base coat for additional protection or paint adhesion. |
| Bare Steel | Unfinished; typically for indoor use or controlled environments. |
Type N deck is available with several finishes for lasting performance, including galvanized (G60 and G90) and prime-painted. Galvanizing resists corrosion well, and G90 has a heavier zinc coating for environments with more moisture or chemical exposure. Prime paint adds a base coat, so it fits projects that call for extra paint or coatings.
Material and finish options
Our Type N 3" Roof Deck uses high-strength 80 KSI steel. It is offered with a corrosion-resistant galvanized finish meeting ANSI standards, prime-painted finishes for added protection, or bare steel for specialized applications. Each finish is engineered for durability and dependable performance in demanding roofing environments.
Custom lengths
Whether a smaller roofing job needs deck as short as 6′-0″ or a large-scale build needs up to 40′-0″, the 3" Type N Roof Deck is delivered with accuracy and efficiency. Our custom length service for Cape Coral projects ensures an optimal fit, reduced waste, and streamlined installation.
3" Type N Roof Deck features
Our 3" Type N roof deck delivers superior strength, fire-rated performance, and long-span efficiency. It is well suited to large commercial roofs and sustainable building applications.
Deep Rib Profile for High Strength
A 3-inch rib depth provides superior strength for longer spans and heavy roofing loads.
Wide Coverage Efficiency
Standard 24-inch coverage uses less material and makes installation simpler, a plus on large-scale projects.
Corrosion-Resistant Finish Options
G60 or G90 galvanized finishes stand up well to harsh environmental conditions.
Fire and Acoustic Performance
Satisfies fire-rating standards in approved assemblies, and supports insulation for soundproofing and thermal efficiency.
Compliance with SDI Standards
Steel Deck Institute (SDI) and ANSI guidelines are met, ensuring quality and code compliance.
Long Span Capability
Gauges of 22, 20, 18, and 16 let you customize the deck to specific load-bearing requirements and project demands.
Installation and connections
Installation practices
- Lay the deck perpendicular to the supports.
- Fasten the deck at every support with puddle welds or TEK screws.
- Overlap sidelaps and secure them with screws at 12" o.c. (on center).
Fasteners and attachments
- 5/8" Diameter Puddle Welds
- #12 or #14 TEK screws at 6" o.c. on edges, and 12" o.c. for sidelaps
- Sidelaps attached using #12 TEK screws at 12" o.c.
Confirm the profile, gauge, span, loads and connections against your project drawings and the applicable product load tables before ordering.
Applications
Long-Span Roofing Systems
Large commercial and industrial roofs that need long spans and fewer supports are a perfect match for Type N. The 3-inch rib profile gives exceptional strength and efficiency across expansive roof designs.
Fire-Rated Roof Assemblies
Fire-rated roof systems commonly use Type N, which works with insulation and fireproofing materials. It supports safety and performance in demanding commercial and industrial applications.
Standards and product documentation
For Cape Coral roofing projects, the 3" Type N deck complies with SDI (Steel Deck Institute) specifications, supporting high standards for design and performance.
3" Type N Roof Deck questions
What are the typical uses of 3" Type N Roof Deck?
Long-span roofing is its purpose. It provides structural support for commercial and industrial roof systems.
What spans can Type N Roof Deck handle?
Span depends on gauge, and Type N Deck can reach up to 16 feet, which reduces intermediate supports.
Which gauges are offered for the 3" Type N Roof Deck?
You can choose from 16 GA to 22 GA to meet different load and span requirements.
Is Type N Roof Deck compatible with fire-rated roofing systems in Cape Coral?
Yes. It supports fire-rated assemblies and works with insulation and fireproofing materials for enhanced safety.
Which finishes can I get on Type N Roof Deck?
Galvanized (G60 or G90) for corrosion resistance, plus prime-painted options for extra protection.
1.5" Type B Vented Roof Deck
Designed for Lightweight Insulated Concrete (LWIC) applications, the 1.5" Type B Vented Deck improves bonding and load distribution. This vented Type B profile is 1.5 inches deep and comes in gauges from 22 GA to 18 GA, so it adapts to different projects in Cape Coral. It complies with SDI and ANSI standards and is offered in galvanized finishes such as G60 and G90 for durability and corrosion resistance.
Dimensions and profile
| Property | Dimension |
|---|---|
| Profile Depth | 1.5 inches |
| Coverage Width | 36 inches |
| Rib Spacing | 6 inches (center to center) |
| Rib Height | 1.5 inches |
The 1.5" Type B Vented Deck has a 1.5 inch rib depth and a 36 inch standard coverage width, a good match for Lightweight Insulated Concrete (LWIC) applications. Rib spacing is 6 inches (center to center), and the 39 inch overall width allows secure overlaps and strong composite action with concrete slabs. Perforations in the profile promote adhesion and proper LWIC curing, which boosts strength, durability, and efficiency.
Gauges and thicknesses
| Gauge | Bare steel thickness (in) | Weight (lbs/sq ft) | Typical applications |
|---|---|---|---|
| 22 | 0.0295 | 1.6 | Light-duty roofing and small spans. |
| 20 | 0.0358 | 2 | Medium spans, roofing, and siding. |
| 18 | 0.0474 | 2.6 | Heavy-duty applications. |
| 16 | 0.0598 | 3 | Heavy load spans. |
Type B Vented Deck can be ordered in gauges 22, 20, and 18, which differ in thickness and load capacity to fit the needs of each project. Lighter gauges (22 and 20) are cost-effective and best for shorter spans. The thicker 18 gauge brings greater structural strength to support longer spans and heavier loads. In insulated concrete applications, the perforated design strengthens the bond with LWIC for proper adhesion and curing.
Finishes and coatings
| Finish | Details |
|---|---|
| Galvanized G60 | Zinc coating of 0.6 oz/ft². Recommended for general environments. |
| Galvanized G90 | Zinc coating of 0.9 oz/ft². Ideal for highly corrosive environments. |
| Prime-Painted | Provides a base coat for additional protection or paint adhesion. |
| Bare Steel | Unfinished; typically for indoor use or controlled environments. |
Long-term performance comes from the galvanized (G60 and G90) and prime-painted finishes on the Type B Vented Deck. Galvanized coatings resist corrosion, and G90 gives extra protection in highly corrosive environments. Prime paint adds a base coat for projects that need further coatings. Together these finishes extend deck life and support performance in LWIC applications.
Material and finish options
The B 1.5" Vented Deck is made from high-strength 50 KSI steel. Options include a corrosion-resistant galvanized finish that meets ANSI/SDI standards, a range of painted finishes for tailored aesthetics, and bare steel for custom applications. Every finish is meant to improve durability and keep performance steady in demanding environments.
Custom lengths
Precise lengths are available from 6′-0″ for smaller projects up to 40′-0″ for larger constructions, and we handle each dimension with efficiency. For Cape Coral projects, our custom length service is shaped around your requirements so the fit is optimal and waste is minimal.
1.5" Type B Vented Roof Deck features
Airflow control, fire resistance, and lightweight durability define the 1.5" Type B Vented Deck, a good choice for commercial buildings that need ventilation and efficiency.
Optimized for LWIC Systems
Engineered to enhance adhesion in Lightweight Insulated Concrete (LWIC) applications, so bonding and structural performance stay reliable.
Improved Concrete Bonding
Because of the perforations, lightweight concrete bonds better to the deck, producing a strong roof system and superior load distribution.
Structural & Fire Performance
Offers high durability and fire-rated performance in LWIC systems, and complies with SDI and ANSI standards.
LWIC Roofing Applications
Well suited to Lightweight Insulated Concrete (LWIC) roof systems, giving strength, adhesion, and long-term performance in insulated roofing applications.
Compliance with SDI Standards
Quality and code compliance are supported by Steel Deck Institute (SDI) and ANSI guidelines.
Moisture Management
Reduces trapped moisture, so durability improves and the risk of mold or corrosion goes down.
Installation and connections
Installation practices
- Run the deck perpendicular to the supports.
- Attach the deck at every support by puddle weld or TEK screw.
- Overlap the sidelaps and fasten with screws at 12" o.c.
Fasteners and attachments
- 5/8" Diameter Puddle Welds
- #10 TEK screws at 6" o.c. on edges, and 12" o.c. for sidelaps
- Sidelaps attached using #10 TEK screws at 12" o.c.
Confirm the profile, gauge, span, loads and connections against your project drawings and the applicable product load tables before ordering.
Applications
Lightweight Concrete Systems
For composite slabs in LWIC systems, perforations let moisture escape while the concrete cures, which improves bonding. Condensation stays from getting trapped, structural integrity improves, and the insulated concrete system lasts.
Moisture-Controlled Roof Assemblies
In lightweight insulated concrete (LWIC) applications, the perforated profile improves adhesion and curing. Moisture can release as the concrete cures, which protects long-term insulation performance and prevents structural degradation in humid environments.
Standards and product documentation
Compliance with SDI (Steel Deck Institute) specifications applies to the 1.5" B Vented deck, supporting high standards for design and performance.
1.5" Type B Vented Roof Deck questions
What do the perforations do on vented Type B deck?
Airflow and moisture control improve, condensation is kept from building up, and adhesion gets better in lightweight concrete applications.
In what way does vented Type B deck improve composite systems?
The bond between deck and concrete is enhanced by the small perforations, giving stronger composite action. Moisture can also escape, so there is less risk of trapped water.
Does vented Type B deck work for all Cape Coral roofing applications?
Yes. It offers the most benefit in moisture-sensitive environments like vented roofing systems, where air circulation helps keep insulation from degrading and corroding.
What finishes can I order on vented Type B deck?
Choose galvanized (G60/G90) for corrosion resistance or prime-painted finishes for protection and compatibility with additional coatings.
Is structural strength affected by the vented Type B deck perforations?
No. Perforations are placed strategically, so load capacity is maintained while ventilation benefits apply to specific applications.
1.5" Composite Floor Deck
Designed to bond with poured concrete, the 1.5" composite floor deck combines a high strength-to-weight ratio with better structural efficiency. For Cape Coral jobs it is available in 22 GA to 16 GA, with G60/G90 galvanized finishes, and it meets SDI and ANSI standards.
Dimensions and profile
| Property | Dimension |
|---|---|
| Profile Depth | 1.5 inches |
| Coverage Width | 36 inches |
| Rib Spacing | 6 inches (center to center) |
| Material Width | 39 inches |
This deck has a 1.5 inch rib depth and a 36 inch coverage width. Ribs are spaced 6 inches center to center, and the 39 inch material width gives the overlaps needed for secure laps and strong composite action with the concrete slab.
Gauges and thicknesses
| Gauge | Bare steel thickness (in) | Weight (lbs/sq ft) | Typical applications |
|---|---|---|---|
| 22 | 0.0295 | 1.6 | Light-duty spans. |
| 20 | 0.0358 | 2 | Medium spans. |
| 18 | 0.0474 | 2.6 | Heavy-duty applications. |
| 16 | 0.0598 | 3 | Heavy load spans. |
The 1.5" composite floor deck is produced in 22, 20, 18, and 16 gauge to cover a range of load and span needs. Thin gauges (22 and 20) are light and economical. Thick gauges (18 and 16) add structural strength for heavier loads.
Finishes and coatings
| Finish | Details |
|---|---|
| Galvanized G60 | Zinc coating of 0.6 oz/ft². Recommended for general environments. |
| Galvanized G90 | Zinc coating of 0.9 oz/ft². Ideal for highly corrosive environments. |
| Prime-Painted | Provides a base coat for additional protection or paint adhesion. |
| Bare Steel | Unfinished; typically for indoor use or controlled environments. |
Finishes for the 1.5" composite floor deck include galvanized (G60 and G90) and prime-painted. Galvanized steel resists corrosion best. Prime paint is a protective base coat for projects that need extra coatings. G60 and G90 conform to ASTM A653.
Material and finish options
Our high-strength steel 1.5" composite floor deck comes galvanized to SDI/ANSI standards, painted for a cleaner appearance, or as bare steel for specialized uses. Whichever you pick, you get lasting durability and consistent performance.
Custom lengths
For short runs, deck can be supplied at 6′-0″. For long spans, lengths reach 40′-0″. Because we cut to length, the deck fits well and little material is wasted. Contractors in Cape Coral can specify exact cut lengths.
1.5" Composite Floor Deck features
Looking for a floor system that bonds well to concrete, works with fire ratings, and meets SDI requirements? Our 1.5" composite floor deck suits commercial and residential construction.
Load Capacity at Low Weight
Handles heavy loads without adding much weight, a good fit for composite floors.
Better Structural Efficiency
Works with the concrete as one composite system, gaining strength from the bond.
Galvanized or Prime-Painted Finish
G60/G90 galvanized or prime-painted finishes protect against corrosion and wear.
Fire-Rated Assembly Support
Compatible with fireproofing materials and fire ratings for safer commercial and residential projects.
Meets SDI Standards
Follows Steel Deck Institute (SDI) and ANSI guidelines for quality and code compliance.
Gauges for Every Span
Comes in 22, 20, 18, and 16 gauge, with minimal deflection in composite floor use.
Installation and connections
Installation practices
- Lay the deck perpendicular to the supports.
- Attach with 5/8" diameter puddle welds or #10 TEK screws at 6" on the edges.
- Secure the sidelaps using #10 TEK screws at 12" o.c.
Fasteners and attachments
- 5/8" diameter puddle welds
- Edges: #10 TEK screws at 6" o.c.
- Sidelaps: #10 TEK screws at 12" o.c.
Confirm the profile, gauge, span, loads and connections against your project drawings and the applicable product load tables before ordering.
Applications
Composite Floor Systems
Bonds to concrete slabs and doubles as permanent formwork, reducing deflection while increasing strength.
Mezzanine Flooring
Supports heavy loads on warehouse and commercial mezzanines, and installs efficiently.
Standards and product documentation
The 1.5" composite floor deck is built to SDI (Steel Deck Institute) specifications and ANSI standards, so builders in Cape Coral get dependable design and performance.
1.5" Composite Floor Deck questions
What is the 1.5" composite floor deck designed to do?
It carries concrete slabs as permanent formwork and creates a composite system with greater strength and load-bearing capacity.
Which gauges does it come in when building in Cape Coral?
22 GA to 16 GA. Heavier gauges handle bigger loads and longer spans.
Which finishes can I get?
Galvanized in G60 or G90, which offers superior corrosion resistance, as well as prime-painted and bare steel.
Can the deck be ordered in custom lengths?
Yes. It can be cut anywhere from 6'-0" to 40'-0" to keep waste to a minimum.
Why is the 1.5" composite deck a good floor choice?
Embossed ribs create a mechanical bond with concrete, so the slab and steel deck share load as a structural composite.
2" Composite Floor Deck
For floor systems that call for composite bonding with concrete, the 2" composite floor deck is a flexible choice. Its 2 inch depth and 22 GA to 16 GA gauges let it take on heavier loads and longer spans, including on projects around Cape Coral.
Dimensions and profile
| Property | Dimension |
|---|---|
| Profile Depth | 2 inches |
| Coverage Width | 36 inches |
| Rib Spacing | 12 inches (center to center) |
| Rib Height | 2 inches |
A 2 inch rib depth and 36 inch standard coverage width define this profile. Rib spacing is 12 inches (center to center), and together with the material width it allows secure overlaps and excellent concrete bonding. The design targets maximum load capacity and extended spans.
Gauges and thicknesses
| Gauge | Bare steel thickness (in) | Weight (lbs/sq ft) | Typical applications |
|---|---|---|---|
| 22 | 0.0295 | 1.6 | Light-duty roofing and small spans. |
| 20 | 0.0358 | 2 | Medium spans, roofing, and siding. |
| 18 | 0.0474 | 2.6 | Heavy-duty applications. |
| 16 | 0.0598 | 3 | Heavy load spans. |
Gauges for the 2" composite floor deck run from 22 to 16, so you can match deck to load and span. Thin gauges (22 and 20) are light and economical for shorter spans and lighter loads. Thick gauges (18 and 16) add strength for longer spans and heavier loads.
Finishes and coatings
| Finish | Details |
|---|---|
| Galvanized G60 | Zinc coating of 0.6 oz/ft². Recommended for general environments. |
| Galvanized G90 | Zinc coating of 0.9 oz/ft². Ideal for highly corrosive environments. |
| Prime-Painted | Provides a base coat for additional protection or paint adhesion. |
| Bare Steel | Unfinished; typically for indoor use or controlled environments. |
To protect performance over time, the 2" composite floor deck is offered in galvanized (G60 and G90) and prime-painted finishes. Galvanized coatings give superior corrosion resistance. The prime-painted option is a protective base coat for projects that need paint or additional coatings.
Material and finish options
This 2" composite floor deck is made of high-performance 50 KSI steel. It is available galvanized to SDI/ANSI standards, painted to improve aesthetics, or as bare steel for specialized needs, and each option is durable and reliable on a wide range of jobs.
Custom lengths
We supply deck anywhere between 6′-0″ (smaller projects) and 40′-0″ (larger structures). Lengths are made to your requirements, so fit is optimal and waste is minimal. Contractors in Cape Coral can specify exact cut lengths.
2" Composite Floor Deck features
Looking for high load-bearing capacity, structural efficiency, and dependable concrete bonding? Our 2" composite floor deck suits heavy-duty, efficient, and sustainable floor construction.
Strong Load Capacity
Made for heavier loads, ideal in industrial floors and demanding applications.
Composite Efficiency
Works with concrete as a composite, giving superior strength and a thinner floor.
Galvanized or Prime-Painted Finish
Choose G60/G90 galvanized or prime-painted for durability and corrosion resistance.
Saves Concrete
Reduces concrete use and lowers material cost without losing strength.
SDI Compliance
Meets Steel Deck Institute (SDI) and ANSI guidelines, ensuring quality and code compliance.
Optimized for Long Spans
Spans greater distances with minimal deflection.
Installation and connections
Installation practices
- Position the deck perpendicular to the supports.
- Weld or screw to each support using puddle welds or TEK screws.
- Overlap the sidelaps and secure with screws at 12" o.c.
Fasteners and attachments
- 5/8" diameter puddle welds
- #10 TEK screws at 6" o.c. along edges
- #10 TEK screws at 12" o.c. on sidelaps
Confirm the profile, gauge, span, loads and connections against your project drawings and the applicable product load tables before ordering.
Applications
Composite Floor Systems
Bonds to concrete slabs to cut deflection and add strength, for heavy-duty floors in multi-story commercial and residential construction.
Mezzanine Flooring
A durable base for warehouse and industrial mezzanines, supporting heavy loads and going in efficiently.
Standards and product documentation
The 2" composite floor deck is built to SDI (Steel Deck Institute) specifications, so builders in Cape Coral get dependable design and performance.
2" Composite Floor Deck questions
What is the 2" composite floor deck designed for?
It supports concrete slabs as permanent formwork and creates a composite system that raises structural strength and load-bearing capacity.
Which gauges do you carry when building in Cape Coral?
22 GA to 16 GA, with the thicker gauges recommended for heavier loads and longer spans.
What finish options are there?
Galvanized (G60 or G90) for superior corrosion resistance, prime-painted, and bare steel.
Can lengths be customized?
Yes. Lengths from 6'-0" to 40'-0" can be cut to order, which minimizes waste.
How does it handle demanding applications?
With a 2 inch depth, it supports greater spans and heavier loads than shallower decks.
3" Composite Floor Deck
The 3" composite floor deck suits floor systems that must span farther and carry more load. At 3 inches deep and in 22 GA to 16 GA, it offers superior strength and durability to builders in Cape Coral. SDI and ANSI standards apply, and G60 and G90 galvanized finishes help it resist corrosion.
Dimensions and profile
| Property | Dimension |
|---|---|
| Profile Depth | 3 inches |
| Coverage Width | 36 inches |
| Rib Spacing | 12 inches (center to center) |
| Rib Height | 3 inches |
The 3" composite floor deck has a 3 inch rib depth and a 36 inch standard coverage width, and is made for superior strength in heavy-duty composite floors. Rib spacing is 12 inches (center to center) and the overall material width is 36 inches, giving efficient overlaps and excellent concrete bonding. Maximum load capacity and extended spans make it ideal for demanding construction.
Gauges and thicknesses
| Gauge | Bare steel thickness (in) | Weight (lbs/sq ft) | Typical applications |
|---|---|---|---|
| 22 | 0.0295 | 1.6 | Light-duty roofing and small spans. |
| 20 | 0.0358 | 2 | Medium spans, roofing, and siding. |
| 18 | 0.0474 | 2.6 | Heavy-duty applications. |
| 16 | 0.0598 | 3 | Heavy load spans. |
Gauges for the 3" composite floor deck range from 22 to 16, which covers many load and span requirements. Thinner gauges (22 and 20) are light and economical for shorter spans and lighter loads. Thicker gauges (18 and 16) provide more structural strength for longer spans and heavier loads, and add reliability in tougher applications.
Finishes and coatings
| Finish | Details |
|---|---|
| Galvanized G60 | Zinc coating of 0.6 oz/ft². Recommended for general environments. |
| Galvanized G90 | Zinc coating of 0.9 oz/ft². Ideal for highly corrosive environments. |
| Prime-Painted | Provides a base coat for additional protection or paint adhesion. |
| Bare Steel | Unfinished; typically for indoor use or controlled environments. |
The 3" composite floor deck is offered in several finishes, including galvanized (G60 and G90) and prime-painted, for durability over time. Galvanized finishes resist corrosion well, and G90 carries a higher zinc coating for environments with more moisture or chemical exposure. Prime-painted deck has a protective base coat for projects needing paint or other coatings.
Material and finish options
Our 3" composite floor deck uses high-performance 50 KSI steel and comes galvanized (meeting SDI/ANSI standards), painted (for enhanced aesthetics), or bare (for specialized applications). Whichever finish you select, durability and dependable performance suit diverse construction settings.
Custom lengths
Custom lengths start at 6′-0″ for small projects and reach 40′-0″ for larger structures. Cutting deck to your needs means a good fit and little material wasted. Contractors in Cape Coral can specify exact cut lengths.
3" Composite Floor Deck features
Our 3" composite floor deck provides outstanding strength, extended spans, and dependable concrete bonding. It is a fit for heavy-duty, efficient, and sustainable floor systems.
Exceptional Load Strength
Handles heavy loads, so it works well in industrial applications and tough construction conditions.
Composite Efficiency
Works in harmony with concrete as a composite, which thins the floor while maximizing strength.
Galvanized or Prime-Painted Finish
G60/G90 galvanized or prime-painted finishes improve durability and corrosion resistance.
Fire-Rating Compatible
Supports fireproofing materials and fire ratings, adding safety to commercial and residential projects.
SDI and ANSI Compliant
Meets Steel Deck Institute (SDI) and ANSI guidelines to ensure quality and code compliance.
Extended Spans
A 3 inch profile spans longer distances and reduces additional supports on big projects.
Installation and connections
Installation practices
- Install perpendicular to the supports.
- Fasten the deck to each support with puddle welds or TEK screws.
- Overlap sidelaps and fasten with screws at 12" o.c.
Fasteners and attachments
- 5/8" diameter puddle welds
- #10 TEK screws at 6" o.c. on edges and at 12" o.c. on sidelaps
- #10 TEK screws at 12" o.c. at the sidelaps
Confirm the profile, gauge, span, loads and connections against your project drawings and the applicable product load tables before ordering.
Applications
Long-Span Composite Floors
Suited to long spans that reduce the need for columns, the 3" Composite Floor Deck boosts structural efficiency and supports heavy loads in warehouses, distribution centers, and big commercial spaces.
Heavy Equipment Platforms
In industrial facilities and manufacturing plants, the 3" Composite Floor Deck builds durable platforms for heavy machinery that handle concentrated loads and distribute them better.
Standards and product documentation
For Cape Coral projects, the 3" composite floor deck complies with SDI (Steel Deck Institute) specifications, ensuring high standards for design and performance.
3" Composite Floor Deck questions
What is the 3" composite floor deck designed to do?
The 3" Composite Floor Deck supports concrete slabs as permanent formwork and forms a composite system that is ideal for long spans and heavy loads.
Which gauges are offered for the 3" composite floor deck when building in Cape Coral?
22 GA through 16 GA, giving flexibility for different load capacities and structural needs.
Which finishes come with the 3" composite floor deck?
Galvanized (G60 or G90) for corrosion resistance, prime-painted when extra coatings are needed, and bare steel for certain applications.
Does the 3" composite floor deck come in custom lengths?
Yes. It can be custom-cut from 6'-0" to 40'-0", which gives a perfect fit and cuts waste on site.
When should the 3" composite floor deck be used on large jobs?
Choose it when you need longer spans and heavier loads. Its 3 inch depth makes it the preferred pick for industrial facilities, warehouses, and multi-story projects requiring maximum durability.
9/16" Type S Form Deck
Slab construction in floors and roofs relies on Type S Form Deck as permanent formwork, thanks to its strength and straightforward installation. Gauges run from 28 GA to 20 GA, and manufacturing meets SDI and ANSI standards. It is a regular choice for Cape Coral concrete work.
Dimensions and profile
| Property | Dimension |
|---|---|
| Profile Depth | 9/16 inches |
| Coverage Width | 36 inches |
| Rib Spacing | 2.57 inches (center to center) |
| Rib Height | 9/16 inches |
Type S Form Deck has a shallow 9/16-inch rib depth and a standard coverage width of 36 inches, which suits fast concrete slab forming. With ribs spaced 2.57 inches (center to center), it gives a stable forming surface that holds concrete volume down without giving up structural integrity.
Gauges and thicknesses
| Gauge | Bare steel thickness (in) | Weight (lbs/sq ft) | Typical applications |
|---|---|---|---|
| 28 | 0.0149 | 0.65 | Light-duty concrete formwork, low-load applications. |
| 26 | 0.0179 | 0.75 | Standard concrete slabs. |
| 24 | 0.0239 | 1.0 | Medium-duty floor and roof slabs. |
| 22 | 0.0299 | 1.25 | Medium-duty floors, multi-level buildings. |
| 20 | 0.0358 | 1.5 | Heavy-duty formwork, bridges. |
Five gauges are offered for Type S Form Deck: 28, 26, 24, 22, and 20. Choose 28 or 26 for cost-effective standard concrete slabs. Where spans are longer or concrete loads heavier, as with bridges and industrial floors, gauges 22 and 20 give superior strength.
Finishes and coatings
| Finish | Details |
|---|---|
| Galvanized G60 | Zinc coating of 0.6 oz/ft². Recommended for general environments. |
| Galvanized G90 | Zinc coating of 0.9 oz/ft². Ideal for highly corrosive environments. |
| Prime-Painted | Provides a base coat for additional protection or paint adhesion. |
| Bare Steel | Unfinished; typically for indoor use or controlled environments. |
Type S Form Deck is supplied galvanized (G60 and G90) or prime-painted. Galvanizing protects against corrosion, and G90 gives extra protection in highly corrosive conditions. G60 and G90 finishes both meet ASTM A653 specifications.
Material and finish options
Our Type S Form Deck is made from high-strength 80 KSI steel. Choose a corrosion-resistant galvanized finish that meets SDI/ANSI standards, one of several painted finishes for a tailored look, or bare steel for custom applications. Every finish is meant to improve durability and keep performance steady in demanding environments.
Custom lengths
From 6′-0″ pieces for smaller projects to spans reaching 40′-0″ for larger construction, we supply the dimensions you need. Our custom length service is set up around your requirements, so the deck fits well and little material is wasted.
9/16" Type S Form Deck features
Type S Form Deck delivers high structural strength, efficient concrete forming, and corrosion-resistant finishes at a sensible price. It adapts well to multi-level buildings, bridges, and tunnels.
High Structural Strength
Engineered for concrete slab support, with strength and stability that hold during and after the pour.
Efficient Concrete Formwork
Fast construction is the draw: this form deck suits slab forming in multi-level buildings, bridges, and tunnels, and it saves labor time and material.
Galvanized or Prime-Painted Finish
Durable, corrosion-resistant G60/G90 galvanized or prime-painted finishes for demanding environments.
Cost-Effective Solution
Its lightweight shallow profile means less concrete and a stable forming surface, which brings down project costs.
Compliance with SDI Standards
Steel Deck Institute (SDI) and ANSI guidelines are met, which ensures quality and code compliance.
Versatile Design Options
Gauges 28 through 20 are offered along with G60/G90 galvanized coatings and custom lengths of 6 to 40 feet.
Installation and connections
Installation practices
- Place the deck at right angles to the supports.
- Attach it at every support with pins, powder-actuated fasteners, or TEK screws.
- Overlap the sidelaps and fasten them with screws at 12" o.c.
Fasteners and attachments
- Deck is secured to supports with pins or powder-actuated fasteners
- #10 TEK screws at 6" o.c. on edges and 12" o.c. for sidelaps
- Sidelaps are attached by button punching or by #10 TEK screws at 12" o.c.
Confirm the profile, gauge, span, loads and connections against your project drawings and the applicable product load tables before ordering.
Applications
Composite Floor Slabs
Slab forming in multi-level buildings, bridges, and tunnels is an ideal fit. The shallow rib profile cuts concrete volume and provides an efficient, stable forming surface.
Bridge and Tunnel Formwork
Type S Form Deck sees wide use as permanent concrete formwork in bridge decks and tunnels, where it supports the structure during concrete placement.
Standards and product documentation
Design and performance of Type S Form Deck follow SDI (Steel Deck Institute) specifications and ANSI standards, a point worth noting for any project in Cape Coral.
9/16" Type S Form Deck questions
Why use Type S form deck?
Type S form deck acts as permanent formwork for concrete slabs in floor and roof systems. It gives a stable base while concrete is placed and stays put after curing.
Is form deck the same as composite deck?
No. Form deck serves only as formwork, so the cured concrete slab carries the load independently. Composite deck bonds structurally with the concrete and shares load permanently.
What are the Type S form deck gauge options?
28, 26, 24, 22, and 20 GA, with thickness from 0.0149" to 0.0358".
Which fastening methods work for Type S form deck?
Pins, powder-actuated fasteners, or TEK screws attach the deck. Button punching or #10 TEK screws at 12" o.c. secure the sidelaps.
Does Type S form deck come in custom lengths?
Yes, in lengths from 6'-0" to 40'-0". That reduces waste and fits each project precisely, including work in Cape Coral.
1" Type HD Form Deck
Type HD Form Deck is heavy-duty formwork for concrete in floors and roofs, with strong support and durability. It comes in gauges from 26 GA to 20 GA, handling greater loads and longer spans efficiently. The deck meets SDI and ANSI standards, and galvanized finishes (G60 and G90) add corrosion resistance.
Dimensions and profile
| Property | Dimension |
|---|---|
| Profile Depth | 1 inch |
| Coverage Width | 36 inches |
| Rib Spacing | 4 inches (center to center) |
| Rib Height | 1 inch |
Type HD Form Deck has a 1-inch rib depth and a standard 36-inch coverage width, a fit for heavy-duty concrete formwork in floors and roofs. Ribs are spaced 4 inches (center to center), and the overall material width of 39 inches gives secure overlaps and solid concrete support. The profile carries greater loads and holds down material costs, which helps on demanding construction projects.
Gauges and thicknesses
| Gauge | Bare steel thickness (in) | Weight (lbs/sq ft) | Typical applications |
|---|---|---|---|
| 26 | 0.0179 | 0.75 | Light-duty concrete formwork, low-load floors. |
| 24 | 0.0239 | 1.0 | Standard floors, light industrial applications. |
| 22 | 0.0299 | 1.25 | Medium-duty floors, parking structures. |
| 20 | 0.0359 | 1.5 | Heavy-duty formwork, bridges, industrial slabs. |
Type HD Form Deck comes in gauges 26, 24, 22, and 20. Gauges 26 and 24 are the lighter, cost-effective choices for standard concrete slabs and moderate spans. For longer spans and heavier concrete loads, such as industrial floors, bridges, and parking structures, gauges 22 and 20 give superior strength and support.
Finishes and coatings
| Finish | Details |
|---|---|
| Galvanized G60 | Zinc coating of 0.6 oz/ft². Recommended for general environments. |
| Galvanized G90 | Zinc coating of 0.9 oz/ft². Ideal for highly corrosive environments. |
| Prime-Painted | Provides a base coat for additional protection or paint adhesion. |
| Bare Steel | Unfinished; typically for indoor use or controlled environments. |
For durability and long-term performance, Type HD Form Deck is supplied in galvanized (G60 and G90) and prime-painted finishes. Galvanizing gives excellent corrosion resistance, and G90 has a thicker zinc layer to protect in high-moisture or chemical environments. The prime-painted finish adds a protective base coat. G60 and G90 finishes conform to ASTM A653 specifications.
Material and finish options
High-strength 80 KSI steel is the base of Type HD Deck. A corrosion-resistant galvanized finish meeting SDI/ANSI standards is available, along with a variety of painted finishes for tailored aesthetics and bare steel for custom applications. Each is designed to improve durability and maintain performance in demanding environments.
Custom lengths
Whether the job is small and needs 6′-0″ lengths or large and needs spans up to 40′-0″, we can supply it. The custom length service follows your requirements, so the deck fits well and little is wasted. Contractors in Cape Coral can order to the foot.
1" Type HD Form Deck features
The 1" Type HD Form Deck brings heavy-duty load support, efficient concrete bonding, and enhanced durability to your projects. Industrial floors, bridge formwork, and other demanding structural applications are where it excels.
Heavy-Duty Load Support
Higher concrete loads are what Type HD Form Deck is engineered for, making it ideal when superior strength and stability matter.
Efficient Concrete Bonding
The deep profile carries thicker concrete slabs, which spreads load better and supports long-term performance.
Galvanized or Prime-Painted Finish
G60/G90 galvanized or prime-painted finishes are available for durability and corrosion resistance.
Cost-Effective Formwork Solution
A fit for heavy-duty work such as parking structures, bridge formwork, and industrial floors, and it adapts easily to complex construction needs.
Compliance with SDI Standards
It meets Steel Deck Institute (SDI) and ANSI guidelines, so quality and code compliance are assured.
Versatile Gauge Options
Gauges 26 GA to 20 GA let you meet specific load requirements without losing durability.
Installation and connections
Installation practices
- Run the deck perpendicular to the supports.
- At each support, secure the deck with pins, powder-actuated fasteners, or TEK screws.
- Overlap the sidelaps and fasten with screws at 12" o.c.
Fasteners and attachments
- Pins or powder-actuated fasteners secure the deck to the supports
- #10 TEK screws at 6" o.c. on edges and 12" o.c. for sidelaps
- Sidelaps attached through button punching or #10 TEK screws at 12" o.c.
Confirm the profile, gauge, span, loads and connections against your project drawings and the applicable product load tables before ordering.
Applications
Heavy Industrial Floor Systems
Heavy industrial floors that carry high-load equipment and machinery rely on the strong support of Type HD Form Deck. It keeps performing over time in demanding industrial environments.
Bridge and Highway Formwork
Permanent formwork on bridge and highway projects is a common role for Type HD Form Deck. It supports heavy concrete loads as the concrete is placed and adds lasting strength to the structure.
Standards and product documentation
Specifications from the SDI (Steel Deck Institute) apply to Type HD Form Deck, supporting high standards of design and performance.
1" Type HD Form Deck questions
What is Type HD Form Deck mainly used for?
Mostly as permanent formwork for heavy-duty concrete slabs in industrial floors, bridges, and infrastructure projects. It holds wet concrete during placement and stays in place after curing.
Which gauges does Type HD Form Deck come in?
26 GA, 24 GA, 22 GA, and 20 GA, which cover a range of load capacities and project requirements.
Is temporary shoring needed with Type HD Form Deck?
It can be. Temporary shoring may be required during installation to carry the weight of the deck and wet concrete until the slab has fully cured.
How is Type HD Form Deck usually fastened?
With pins, powder-actuated fasteners, or TEK screws. Sidelaps are secured by button punching or screws at 12" o.c.
Is Type HD Form Deck available in custom lengths in Cape Coral?
Yes, from 6'-0" to 40'-0". That keeps material waste low and gives each project a precise fit.
Type BI Inverted Form Deck
Architectural ceilings with an exposed soffit are what Type B Inverted Form Deck is designed for. It works as permanent formwork for concrete slabs in floors and roofs, in gauges 22 GA through 16 GA, and is a natural fit for Cape Coral commercial and institutional buildings.
Dimensions and profile
| Property | Dimension |
|---|---|
| Profile Depth | 1.5 inches |
| Coverage Width | 36 inches |
| Rib Spacing | 6 inches (center to center) |
| Rib Height | 1.5 inches |
Rib depth is 1.5 inches and standard coverage width is 36 inches on Type BI Inverted Form Deck. Install it with the ribs pointing upward and a smooth flat soffit remains exposed underneath, producing an architectural ceiling with no additional finishes. Ribs are 6 inches apart (center to center), which preserves structural integrity while allowing for concrete placement.
Gauges and thicknesses
| Gauge | Bare steel thickness (in) | Weight (lbs/sq ft) | Typical applications |
|---|---|---|---|
| 22 | 0.0299 | 1.25 | Light-duty floors and ceilings. |
| 20 | 0.0358 | 1.5 | Standard commercial floor systems. |
| 18 | 0.0474 | 2.6 | Heavy-duty applications, parking structures. |
| 16 | 0.0598 | 3.0 | Heavy load industrial floors. |
The gauge lineup for Type BI Inverted Form Deck is 22, 20, 18, and 16. Standard commercial applications suit the lighter gauges (22 and 20). When you need more strength for parking structures or heavy industrial floor systems, use gauges 18 and 16.
Finishes and coatings
| Finish | Details |
|---|---|
| Galvanized G60 | Zinc coating of 0.6 oz/ft². Recommended for general environments. |
| Galvanized G90 | Zinc coating of 0.9 oz/ft². Ideal for highly corrosive environments. |
| Prime-Painted | Provides a base coat for additional protection or paint adhesion. |
| Bare Steel | Unfinished; typically for indoor use or controlled environments. |
Galvanized (G60 and G90) and prime-painted finishes are available for Type BI Inverted Form Deck. Galvanizing resists corrosion, and G90 adds protection in highly corrosive environments. G60 and G90 finishes conform to ASTM A653.
Material and finish options
High-strength steel makes up our Type BI Inverted Form Deck. Order it galvanized for corrosion resistance to ANSI/SDI standards, with one of many painted finishes for tailored aesthetics, or as bare steel when the application is custom. Every finish aims to build durability and sustain performance.
Custom lengths
We cut deck from 6′-0″ for smaller projects up to 40′-0″ for larger constructions. Our custom length service follows your requirements to deliver an optimal fit with minimal waste, whatever the size of the job in Cape Coral.
Type BI Inverted Form Deck features
Type BI Inverted Form Deck brings high structural strength, efficient formwork, and corrosion-resistant finishes to architectural ceilings, multi-level parking structures, and commercial floor systems that require exposed soffits.
High Structural Strength
Carries concrete and live loads and also gives you a finished, exposed ceiling surface.
Efficient Formwork
As permanent formwork for concrete slabs, it saves labor and construction time because no temporary forms need to be removed.
Corrosion Resistance
G60/G90 galvanized or prime-painted finishes hold up against corrosion in commercial environments.
Cost-Effective
One product handles both formwork and structural support, which lowers material and labor costs for exposed ceilings.
Compliance with Standards
SDI and ANSI guidelines are met, so quality and code compliance carry across applications.
Versatile Options
A choice of gauges (22–16 GA) and finishes covers different load requirements and architectural specifications.
Installation and connections
Installation practices
- Install the deck with ribs facing up, perpendicular to the supports.
- Fasten at every support with pins, powder-actuated fasteners, or TEK screws.
- Overlap sidelaps and fasten with button punching or screws at 12" o.c.
Fasteners and attachments
- Deck is secured to supports with pins or powder-actuated fasteners
- #10 TEK screws at 6" o.c. on edges
- Sidelaps are attached with button punching or #10 TEK screws at 12" o.c.
Confirm the profile, gauge, span, loads and connections against your project drawings and the applicable product load tables before ordering.
Applications
Industrial Flooring with Exposed Ceiling
Industrial floor systems gain strong support, and the architecturally finished exposed soffit makes it ideal for schools, offices, and civic buildings.
Multi-Level Parking Structures
Parking garages often use it for permanent formwork with a clean exposed underside, which lowers finishing costs.
Standards and product documentation
SDI (Steel Deck Institute) specifications and ANSI standards apply to Type BI Inverted Form Deck, which supports high standards of design and performance.
Type BI Inverted Form Deck questions
Where is Type BI inverted form deck used?
Typical uses are architectural ceiling systems, multi-level parking structures, schools, offices, and other facilities that need an attractive exposed soffit.
What makes Type BI installation different from standard form deck?
It goes in inverted, with ribs pointing upward. The flat side then faces down as a finished ceiling, so no extra finishing materials are needed.
Which gauges are offered?
Gauges 22, 20, 18, and 16 GA, so you can match different structural requirements.
Which finishes can I choose?
G60 and G90 galvanized finishes give corrosion resistance, and prime-painted finishes add protection.
Is Type BI available in custom lengths for Cape Coral projects?
Yes. Custom lengths from 6'-0" to 40'-0" give a precise fit with little waste.
Ordering made simple
Steel Deck for Cape Coral construction
Start with your plans or a takeoff. We review the profile, gauge, quantities and lengths, help with shop drawings when you need them, and come back with pricing and a delivery plan for Cape Coral.
Send your project requirementsWhat we need to quote your project
- Product profile or series, dimensions, gauge and specified finish.
- Required quantities, sheet or member lengths, and project drawings.
- Project address in Cape Coral, delivery date and site access requirements.
- Any specified load tables, connection details or supporting documentation.
How We Work
We Guide You Through the Process
From manufacturing to delivery, we ensure precision, efficiency, and compliance with industry standards.
Takeoff and Shop Drawings Services
We provide specialized takeoff services for accurate quotations and detailed shop drawings to produce optimized cutting lists for sheets, ensuring efficient execution and waste-free outcomes in your projects.
Manufacture
We manufacture metal decks to SDI and ANSI standards, ensuring strength, durability, and compliance. We provide custom lengths and high-precision fabrication for optimized performance in roof, floor, and form deck applications.
Swift Deliveries & Nationwide Reach
While based in South Florida, we serve clients nationwide, ensuring quality, efficiency, and timely deliveries across the U.S., reflecting our commitment to excellence without boundaries.
Frequently Asked Questions
Where can I get steel deck in Cape Coral?
Miami Metal Deck delivers to Cape Coral with same-day pickup in Miami Gardens and 1-day delivery to most Florida cities. Call 305-760-2575.
Do you provide shop drawings?
Yes. We offer complete takeoff services, shop drawings, and optimized cutting lists for all steel deck orders.
Which types of steel deck does Miami Metal Deck offer?
Our lineup includes roof deck (Type B, Vented Type B, Type N), composite floor deck in several profiles, and form deck (Type S, HD, BI). Every product comes in a range of gauges and galvanized finishes.
How is roof deck different from composite deck?
Roof deck carries insulation and roofing systems. Composite deck works structurally with poured concrete to form a load-bearing floor slab, and form deck serves as temporary or permanent formwork for concrete.
Which gauges and finishes can I order?
Gauges range from 16 to 28, depending on the product type. G60 and G90 coatings are the galvanized finishes, and custom lengths from 6 to 40 feet are available.
Is takeoff and shop drawing support available in Cape Coral?
Yes. Our engineering team handles specialized takeoffs, detailed shop drawings, and optimized cutting lists, so quotes are accurate and projects run efficiently.
Which standards apply to your steel deck?
All steel deck products comply with ANSI/SDI standards: RD-2017 for roof deck, C-2017 for composite floor deck, and NC-2017 for non-composite form deck. We are a Steel Deck Institute member.