SDI Member · ANSI/SDI compliant

Steel Deck Supplier in Hialeah

High-performance steel deck in Hialeah for durable, efficient structures. Roof deck, composite floor deck, and form deck.

Steel Deck Institute Member
SDI Member · ANSI/SDI compliant

Local Steel Deck supply for Hialeah

Miami Metal Deck supplies Steel Deck to contractors, erectors and fabricators building in Hialeah and across Miami-Dade County and the South Florida region. Hialeah is close to our Miami Gardens facility, so stock items are available for same-day pickup and same-day delivery within South Florida.

Salt air and humidity near the coast in Hialeah favor heavier zinc coatings such as G90 galvanized. We match the finish to what your drawings call for. Projects in Hialeah are designed to the Florida Building Code's High-Velocity Hurricane Zone (HVHZ) provisions for Miami-Dade County, so we work directly from your engineer's deck schedule and attachment details.

Product guide

Product specifications for your Hialeah project

Compare profiles, dimensions, material options and applications to prepare your order. Select a product below to explore its technical details.

1.5" Type B Roof Deck

Looking for a 1.5" Type B metal deck supplier for projects in Hialeah? This roof deck delivers strong structural performance and goes in quickly. It comes in 22 GA to 16 GA, meets SDI and ANSI standards, and ships in galvanized finishes such as G60 and G90 for added durability and corrosion resistance on Hialeah roofing jobs.

Dimensions and profile

1.5" Type B Roof Deck profile dimensions
1.5" Type B Roof Deck dimensions
PropertyDimension
Profile Depth1.5 inches
Coverage Width36 inches
Rib Spacing6 inches (center to center)
Rib Height1.5 inches

This 1.5" Type B metal deck has a 1.5 inch rib depth and a standard coverage width of 36 inches, which makes it structurally efficient for roofing and flooring. Ribs sit 6 inches apart (center to center), and the 39 inch overall material width gives secure overlaps and strong composite action with concrete slabs. The profile maximizes strength at minimal weight, so it works across many kinds of construction.

Gauges and thicknesses

1.5" Type B Roof Deck gauges
GaugeBare steel thickness (in)Weight (lbs/sq ft)Typical applications
220.02951.6Light-duty roofing and small spans.
200.03582Medium spans, roofing, and siding.
180.04742.6Heavy-duty applications.
160.05983Heavy load spans.

There are four gauges to choose from for Type B deck: 22, 20, 18, and 16. Each has different thickness and load capacity, so you can fit the deck to the project. Light and cost-effective, 22 and 20 gauge are best on shorter spans and lighter loads. Stronger 18 and 16 gauge carry longer spans and heavier loads, which makes them ideal for demanding applications.

Finishes and coatings

1.5" Type B Roof Deck finishes
FinishDetails
Galvanized G60Zinc coating of 0.6 oz/ft². Recommended for general environments.
Galvanized G90Zinc coating of 0.9 oz/ft². Ideal for highly corrosive environments.
Prime-PaintedProvides a base coat for additional protection or paint adhesion.
Bare SteelUnfinished; typically for indoor use or controlled environments.

For lasting performance, Type B deck is offered with galvanized (G60 and G90) and prime-painted finishes, among others. Galvanizing gives excellent corrosion resistance, and G90 has the higher zinc coating for environments with more exposure to moisture or chemicals. If the project needs extra paint or coating layers, the prime-painted option supplies a protective base coat.

Material and finish options

Steel is offered in 33 KSI, 40 KSI, 50 KSI, and 80 KSI grades, each engineered for a particular structural demand and balancing strength against flexibility. Both galvanized (G60/G90) and prime-painted finishes conform to ASTM A653 for corrosion resistance.

Custom lengths

Deck lengths start at 6′-0″ for compact jobs and run up to 40′-0″ for large structures, so we can fit nearly any layout in Hialeah. Cutting to your custom length keeps waste low and the deck fitting properly on site.

1.5" Type B Roof Deck features

Lightweight yet durable, our 1.5" Type B metal deck also brings fire resistance and a sustainable design. It is a practical, eco-friendly pick for short-span commercial projects.

High Strength-to-Weight Ratio

Exceptional load capacity at low weight suits roofing systems well.

Standard 36 inches Coverage

Coverage is 36 inches wide with a consistent rib design, so installation takes less time and runs more efficiently.

Galvanized or Prime-Painted Finish

Galvanized G60/G90 or prime-painted: either finish improves durability and resists corrosion.

Compatibility with Roofing Systems

Fits roofing systems that use insulation, waterproofing, reflective coatings, drainage, ventilation, and other components.

Compliance with Standards

Steel Deck Institute (SDI) and ANSI guidelines are met, which assures quality and code compliance.

Wide Gauge Range

Choose 22, 20, 18, or 16 gauge to customize the deck for specific load-bearing requirements and project demands.

Installation and connections

Installation practices

  • Place the deck perpendicular to the supports.
  • Secure the deck to each support using puddle welds or TEK screws.
  • Overlap the sidelaps, then screw them down at 12" o.c.

Fasteners and attachments

  • 5/8" Diameter Puddle Welds
  • #10 TEK screws at 6" o.c. on edges, and 12" o.c. for sidelaps
  • Sidelaps attached using #10 TEK screws at 12" o.c.

Confirm the profile, gauge, span, loads and connections against your project drawings and the applicable product load tables before ordering.

Applications

Roof Deck Applications

Roof Deck Applications

Commercial and industrial roof systems that demand structural strength and durability rely heavily on Type B. It carries roofing insulation systems and works for vented as well as non-vented roofs.

Hybrid Structural-Ceiling Systems

Hybrid Structural-Ceiling Systems

Type B can also serve as an exposed ceiling in architectural spaces. It gives structural strength and a clean look while trimming extra materials and installation time.

Standards and product documentation

For Hialeah contractors, the 1.5" Type B deck complies with SDI (Steel Deck Institute) specifications, supporting high standards of design and performance.

1.5" Type B Roof Deck questions

Which gauge is used most often for Type B decking?

Most projects use 20 gauge, since it balances cost and strength for typical applications. Specific project requirements may call for a different gauge.

How do G60 and G90 galvanized finishes differ?

G60 has a 0.60 oz/ft² coating and G90 has 0.90 oz/ft², which is 50% more zinc and better corrosion resistance. G60 fits indoor use or low-moisture settings. G90 is the choice for outdoor use, roofing, steel decking, and structures exposed to weather, humidity, or corrosive conditions.

How far can the 1.5" Type B deck span?

Gauge, span type, and load requirements all affect maximum span. As an example, 22-gauge deck can span up to 8 feet over multiple spans, and 16-gauge deck can reach up to 14 feet. Check the load tables for exact values.

Can 1.5" Type B metal deck be customized for a project in Hialeah?

Yes. Gauge, finish, and length can all be customized. Custom lengths are cut to the project, which cuts waste and makes installation more efficient.

Is 1.5" Type B metal deck compliant with industry standards?

Yes. It follows Steel Deck Institute (SDI) standards and American Iron and Steel Institute (AISI) design guidelines, which supports quality, safety, and compatibility with building codes.

3" Type N Roof Deck

Because of its long-span capability and structural strength, 3" Type N metal deck is widely specified for roofs. The Type N profile is 3 inches deep, with gauges from 22 GA to 16 GA for flexibility on roofing projects in Hialeah. It complies with SDI and ANSI standards and is offered in galvanized finishes such as G60 and G90.

Dimensions and profile

3" Type N Roof Deck profile dimensions
3" Type N Roof Deck dimensions
PropertyDimension
Profile Depth3 inches
Coverage Width24 inches
Rib Spacing8 inches (center to center)
Rib Height3 inches

Depth of profile is 3 inches and coverage width is 24 inches on the Type N Roof Deck. Rib spacing measures 8 inches (center to center), and rib height is 3 inches. A deep rib like this gives the strength needed for longer spans and heavy roofing loads, and the wide coverage makes large roofs quicker to cover.

Gauges and thicknesses

3" Type N Roof Deck gauges
GaugeBare steel thickness (in)Weight (lbs/sq ft)Typical applications
220.02951.8Light duty roofs.
200.03582.2Standard commercial roofs.
180.04742.9Heavy load areas.
160.05983.7Long spans, high loads.

The Type N Roof Deck comes in 22, 20, 18, and 16 gauge, with different thicknesses and load capacities for each roofing project. Lighter gauges (22 and 20) cost less and suit short spans and lighter loads. Heavier gauges (18 and 16) bring added strength and durability, which suits long spans and heavy-duty roofing applications.

Finishes and coatings

3" Type N Roof Deck finishes
FinishDetails
Galvanized G60Zinc coating of 0.6 oz/ft². Recommended for general environments.
Galvanized G90Zinc coating of 0.9 oz/ft². Ideal for highly corrosive environments.
Prime-PaintedProvides a base coat for additional protection or paint adhesion.
Bare SteelUnfinished; typically for indoor use or controlled environments.

Several finish options keep the Type N deck performing over the long term, among them galvanized (G60 and G90) and prime-painted. Excellent corrosion resistance comes from galvanizing, and G90 has more zinc for greater exposure to moisture or chemicals. If a project needs additional paint or coating layers, the prime-painted option gives a protective base coat.

Material and finish options

Our Type N 3" Roof Deck uses high-strength 80 KSI steel. It is offered with a corrosion-resistant galvanized finish meeting ANSI standards, prime-painted finishes for added protection, or bare steel for specialized applications. Each finish is engineered for durability and dependable performance in demanding roofing environments.

Custom lengths

Lengths start at 6′-0″ for smaller roofing projects and extend to 40′-0″ for large-scale construction, and the 3" Type N Roof Deck is cut accurately and efficiently. With our custom length service, Hialeah roofers get a better fit, less waste, and simpler installation.

3" Type N Roof Deck features

For large-scale commercial roofing and sustainable buildings, our 3" Type N roof deck provides superior strength, fire-rated performance, and long-span efficiency.

Deep Rib Profile for High Strength

With a 3-inch rib depth, the deck is strong enough for longer spans and heavy roofing loads.

Wide Coverage Efficiency

A standard coverage of 24 inches means less material and easier installation, which is ideal for large-scale projects.

Corrosion-Resistant Finish Options

Choose G60 or G90 galvanized for excellent durability in harsh environmental conditions.

Fire and Acoustic Performance

In approved assemblies it meets fire-rating standards, and it works with insulation for soundproofing and thermal efficiency.

Compliance with SDI Standards

Quality and code compliance are assured by Steel Deck Institute (SDI) and ANSI guidelines.

Long Span Capability

The 22, 20, 18, and 16 gauge options allow customization for specific load-bearing requirements and project demands.

Installation and connections

Installation practices

  • Install the deck perpendicular to the supports.
  • Weld or screw the deck at each support with puddle welds or TEK screws.
  • Overlap sidelaps and secure with screws at 12" o.c. (on center).

Fasteners and attachments

  • 5/8" Diameter Puddle Welds
  • #12 or #14 TEK screws at 6" o.c. on edges, and 12" o.c. for sidelaps
  • Sidelaps attached using #12 TEK screws at 12" o.c.

Confirm the profile, gauge, span, loads and connections against your project drawings and the applicable product load tables before ordering.

Applications

Long-Span Roofing Systems

Long-Span Roofing Systems

Where large commercial and industrial roofs need long spans and fewer supports, Type N is the right fit. The 3-inch rib profile provides exceptional strength and efficiency on expansive roof designs.

Fire-Rated Roof Assemblies

Fire-Rated Roof Assemblies

Type N is a common choice in fire-rated roof systems because it is compatible with insulation and fireproofing materials. Safety and performance are supported in demanding commercial and industrial applications.

Standards and product documentation

SDI (Steel Deck Institute) specifications are met by the 3" Type N deck, ensuring high standards for design and performance on Hialeah projects.

3" Type N Roof Deck questions

What is 3" Type N Roof Deck used for?

It is designed for long-span roofing, giving structural support to commercial and industrial roof systems.

How far can Type N Roof Deck span?

Depending on gauge, Type N Deck can span up to 16 feet, so fewer intermediate supports are needed.

Which gauges come in 3" Type N Roof Deck?

Gauges run from 16 GA to 22 GA, giving options for different load and span requirements.

Does Type N Roof Deck work with fire-rated roofing systems?

Yes. Type N Deck supports fire-rated assemblies and accommodates insulation and fireproofing materials for added safety.

What finishes does Type N Roof Deck come in?

Galvanized finishes (G60 or G90) resist corrosion, and prime-painted options add protection.

1.5" Type B Vented Roof Deck

The 1.5" Type B Vented Deck is purpose-built for Lightweight Insulated Concrete (LWIC) applications, where it gives better bonding and superior load distribution. Profile depth is 1.5 inches, and gauges range from 22 GA to 18 GA, offering versatility for different jobs in Hialeah. SDI and ANSI standards are met, and galvanized finishes such as G60 and G90 provide durability and corrosion resistance.

Dimensions and profile

1.5" Type B Vented Roof Deck profile dimensions
1.5" Type B Vented Roof Deck dimensions
PropertyDimension
Profile Depth1.5 inches
Coverage Width36 inches
Rib Spacing6 inches (center to center)
Rib Height1.5 inches

At 1.5 inches deep with a 36 inch standard coverage width, the 1.5" Type B Vented Deck is ideal for Lightweight Insulated Concrete (LWIC) applications. Ribs are spaced 6 inches (center to center), and the overall width of 39 inches allows secure overlaps and strong composite action with concrete slabs. Its perforated profile boosts adhesion and makes sure LWIC cures properly, maximizing strength, durability, and efficiency.

Gauges and thicknesses

1.5" Type B Vented Roof Deck gauges
GaugeBare steel thickness (in)Weight (lbs/sq ft)Typical applications
220.02951.6Light-duty roofing and small spans.
200.03582Medium spans, roofing, and siding.
180.04742.6Heavy-duty applications.
160.05983Heavy load spans.

Gauges 22, 20, and 18 are offered for the Type B Vented Deck, each with its own thickness and load capacity. The lighter 22 and 20 gauges cost less and fit shorter spans. The thicker 18 gauge adds structural strength for longer spans and heavier loads. Perforations strengthen the bond between LWIC and the deck, supporting adhesion and curing in insulated concrete applications.

Finishes and coatings

1.5" Type B Vented Roof Deck finishes
FinishDetails
Galvanized G60Zinc coating of 0.6 oz/ft². Recommended for general environments.
Galvanized G90Zinc coating of 0.9 oz/ft². Ideal for highly corrosive environments.
Prime-PaintedProvides a base coat for additional protection or paint adhesion.
Bare SteelUnfinished; typically for indoor use or controlled environments.

Finish options for the Type B Vented Deck are galvanized (G60 and G90) and prime-painted, selected to protect performance over time. Corrosion resistance comes from the galvanized coatings, with G90 adding protection in highly corrosive environments. A prime-painted deck gets a protective base coat, which is useful when further coatings are planned. The result is a longer deck lifespan and dependable results in LWIC applications.

Material and finish options

The B 1.5" Vented Deck is made from high-strength 50 KSI steel. Options include a corrosion-resistant galvanized finish that meets ANSI/SDI standards, a range of painted finishes for tailored aesthetics, and bare steel for custom applications. Every finish is meant to improve durability and keep performance steady in demanding environments.

Custom lengths

Precise lengths are available from 6′-0″ for smaller projects up to 40′-0″ for larger constructions, and we handle each dimension with efficiency. For Hialeah projects, our custom length service is shaped around your requirements so the fit is optimal and waste is minimal.

1.5" Type B Vented Roof Deck features

Our 1.5" Type B Vented Deck offers lightweight durability, airflow control, and fire resistance, which suits ventilated, efficient commercial applications.

Optimized for LWIC Systems

Created to enhance adhesion in Lightweight Insulated Concrete (LWIC) applications, ensuring proper bonding and structural performance.

Improved Concrete Bonding

The perforations enhance the bond between lightweight concrete and the deck, resulting in a strong roof system and superior load distribution.

Structural & Fire Performance

Complies with SDI and ANSI standards and delivers high durability and fire-rated performance when used in LWIC systems.

LWIC Roofing Applications

Suited to Lightweight Insulated Concrete (LWIC) roof systems, where it provides strength, adhesion, and long-term performance in insulated roofing applications.

Compliance with SDI Standards

Follows Steel Deck Institute (SDI) and ANSI guidelines for quality and code compliance.

Moisture Management

Helps stop moisture from being trapped, which improves durability and lowers the risk of mold or corrosion.

Installation and connections

Installation practices

  • Place the deck perpendicular to the supports.
  • Secure the deck at each support with puddle welds or TEK screws.
  • Overlap sidelaps and fasten them with screws at 12" o.c.

Fasteners and attachments

  • 5/8" Diameter Puddle Welds
  • #10 TEK screws at 6" o.c. on edges, and 12" o.c. for sidelaps
  • Sidelaps attached using #10 TEK screws at 12" o.c.

Confirm the profile, gauge, span, loads and connections against your project drawings and the applicable product load tables before ordering.

Applications

Lightweight Concrete Systems

Lightweight Concrete Systems

For composite slabs in LWIC systems, perforations let moisture escape while the concrete cures, which improves bonding. Condensation stays from getting trapped, structural integrity improves, and the insulated concrete system lasts.

Moisture-Controlled Roof Assemblies

Moisture-Controlled Roof Assemblies

In lightweight insulated concrete (LWIC) applications, the perforated profile improves adhesion and curing. Moisture can release as the concrete cures, which protects long-term insulation performance and prevents structural degradation in humid environments.

Standards and product documentation

Hialeah projects specifying the 1.5" B Vented deck get a product that complies with SDI (Steel Deck Institute) specifications, which sets high standards for design and performance.

1.5" Type B Vented Roof Deck questions

Why does the vented Type B deck have perforations?

They improve airflow and moisture control, stop condensation from building up, and improve adhesion in lightweight concrete applications.

How does vented Type B deck help composite systems in Hialeah?

Small perforations strengthen the bond between deck and concrete for stronger composite action. They also let moisture escape, which lowers the chance of water getting trapped.

Can vented Type B deck be used in every roofing application?

Yes, though it helps most in moisture-sensitive settings such as vented roofing systems, where air circulation protects insulation from degradation and corrosion.

Which finishes come on the vented Type B deck?

Galvanized (G60/G90) provides corrosion resistance, and prime-painted finishes provide protection and work with additional coatings.

Do the perforations reduce the structural strength of the vented Type B deck?

No. They are placed strategically so the deck keeps its load capacity and still delivers ventilation benefits for specific applications.

1.5" Composite Floor Deck

The 1.5" composite floor deck gives Hialeah projects a high strength-to-weight ratio and bonds directly to poured concrete, which improves the structural efficiency of the slab. It is offered in 22 GA to 16 GA with G60 or G90 galvanized finishes, and it meets SDI and ANSI standards.

Dimensions and profile

1.5" Composite Floor Deck profile dimensions
1.5" Composite Floor Deck dimensions
PropertyDimension
Profile Depth1.5 inches
Coverage Width36 inches
Rib Spacing6 inches (center to center)
Material Width39 inches

This deck has a 1.5 inch rib depth and a 36 inch coverage width. Ribs are spaced 6 inches center to center, and the 39 inch material width gives the overlaps needed for secure laps and strong composite action with the concrete slab.

Gauges and thicknesses

1.5" Composite Floor Deck gauges
GaugeBare steel thickness (in)Weight (lbs/sq ft)Typical applications
220.02951.6Light-duty spans.
200.03582Medium spans.
180.04742.6Heavy-duty applications.
160.05983Heavy load spans.

Gauge options for the 1.5" composite floor deck are 22, 20, 18, and 16, so you can match the deck to the load and span. Use 22 and 20 gauge where weight and cost matter most. Use 18 and 16 gauge for heavier loading.

Finishes and coatings

1.5" Composite Floor Deck finishes
FinishDetails
Galvanized G60Zinc coating of 0.6 oz/ft². Recommended for general environments.
Galvanized G90Zinc coating of 0.9 oz/ft². Ideal for highly corrosive environments.
Prime-PaintedProvides a base coat for additional protection or paint adhesion.
Bare SteelUnfinished; typically for indoor use or controlled environments.

The 1.5" composite floor deck ships in G60 or G90 galvanized and in prime-painted. Galvanized coatings resist corrosion best, and prime paint gives projects a protective base for added coatings. Both G60 and G90 meet ASTM A653.

Material and finish options

Our high-strength steel 1.5" composite floor deck comes galvanized to SDI/ANSI standards, painted for a cleaner appearance, or as bare steel for specialized uses. Whichever you pick, you get lasting durability and consistent performance.

Custom lengths

For short runs, deck can be supplied at 6′-0″. For long spans, lengths reach 40′-0″. Because we cut to length, the deck fits well and little material is wasted. Contractors in Hialeah can specify exact cut lengths.

1.5" Composite Floor Deck features

Our 1.5" composite floor deck is built for commercial and residential floor systems, with dependable concrete bonding, compatibility with fire-rated assemblies, and SDI-compliant performance.

Strong for Its Weight

Carries substantial loads at low weight, which suits composite floor systems.

Efficient Composite Action

Bonds with the concrete to form a composite system, adding strength through the bond.

Galvanized or Prime-Painted Finish

Choose G60/G90 galvanized or prime-painted for durability and corrosion resistance.

Fire Rating Compatibility

Works with fireproofing materials and fire ratings, adding safety to commercial and residential buildings.

SDI and ANSI Compliant

Conforms to Steel Deck Institute (SDI) and ANSI guidelines for quality and code compliance.

Span-Ready Gauges

Offered in 22, 20, 18, and 16 gauge, with minimal deflection in composite floor applications.

Installation and connections

Installation practices

  • Place the deck perpendicular to the supports.
  • Fasten edges with 5/8" diameter puddle welds or #10 TEK screws at 6".
  • Fasten sidelaps with #10 TEK screws at 12" o.c.

Fasteners and attachments

  • Puddle welds, 5/8" diameter
  • Edge fastening with #10 TEK screws at 6" o.c.
  • Sidelap fastening with #10 TEK screws at 12" o.c.

Confirm the profile, gauge, span, loads and connections against your project drawings and the applicable product load tables before ordering.

Applications

Composite Floor Systems

Composite Floor Systems

Bonds to concrete slabs and doubles as permanent formwork, reducing deflection while increasing strength.

Mezzanine Flooring

Mezzanine Flooring

Supports heavy loads on warehouse and commercial mezzanines, and installs efficiently.

Standards and product documentation

Specifiers in Hialeah can count on the 1.5" composite floor deck to follow SDI (Steel Deck Institute) specifications and ANSI standards, which sets high design and performance standards.

1.5" Composite Floor Deck questions

What is the 1.5" composite floor deck mainly used for?

It supports concrete slabs as permanent formwork and forms a composite system that increases structural strength and load capacity.

Which gauges can I order for Hialeah projects?

Gauges run from 22 GA to 16 GA. Heavier gauges are the better choice for greater loads and longer spans.

Which finishes are available?

You can order galvanized (G60 or G90) for strong corrosion resistance, prime-painted, or bare steel.

Is custom cutting available?

Yes. Lengths from 6'-0" to 40'-0" can be cut to order, which keeps waste low.

Why does the 1.5" composite deck work well for floors?

Its embossed rib profile grips the concrete mechanically, so the steel deck and the slab share the load as one composite slab.

2" Composite Floor Deck

The 2" composite floor deck is a versatile floor system option that bonds well with concrete for added strength. With a 2 inch depth and 22 GA to 16 GA gauges, it handles heavier loads and longer spans on Hialeah projects.

Dimensions and profile

2" Composite Floor Deck profile dimensions
2" Composite Floor Deck dimensions
PropertyDimension
Profile Depth2 inches
Coverage Width36 inches
Rib Spacing12 inches (center to center)
Rib Height2 inches

The 2" composite floor deck has a 2 inch rib depth and a standard 36 inch coverage width. Ribs sit 12 inches apart (center to center), and the material width supports secure overlaps and strong concrete bonding. The profile is built for maximum load capacity and extended spans.

Gauges and thicknesses

2" Composite Floor Deck gauges
GaugeBare steel thickness (in)Weight (lbs/sq ft)Typical applications
220.02951.6Light-duty roofing and small spans.
200.03582Medium spans, roofing, and siding.
180.04742.6Heavy-duty applications.
160.05983Heavy load spans.

Available in gauges 22 to 16, the 2" composite floor deck covers a wide spread of load and span needs. The thinner 22 and 20 gauges are light and economical, best for shorter spans and lighter loads. The thicker 18 and 16 gauges bring more structural strength for longer spans and heavier loads.

Finishes and coatings

2" Composite Floor Deck finishes
FinishDetails
Galvanized G60Zinc coating of 0.6 oz/ft². Recommended for general environments.
Galvanized G90Zinc coating of 0.9 oz/ft². Ideal for highly corrosive environments.
Prime-PaintedProvides a base coat for additional protection or paint adhesion.
Bare SteelUnfinished; typically for indoor use or controlled environments.

To protect performance over time, the 2" composite floor deck is offered in galvanized (G60 and G90) and prime-painted finishes. Galvanized coatings give superior corrosion resistance. The prime-painted option is a protective base coat for projects that need paint or additional coatings.

Material and finish options

The 2" composite floor deck is made from high-performance 50 KSI steel. Pick galvanized finishes that meet SDI/ANSI standards, painted finishes for a better look, or bare steel for specialized applications, and expect durable performance in varied construction settings.

Custom lengths

Lengths start at 6′-0″ for smaller projects and extend to 40′-0″ for larger structures. Deck is cut to the lengths you specify, so it fits properly and generates little waste. This applies to every Hialeah order.

2" Composite Floor Deck features

The 2" composite floor deck delivers high load-bearing capacity, structural efficiency, and reliable concrete bonding. It is an efficient, sustainable option for heavy-duty floor construction.

Strong Load Capacity

Made for heavier loads, ideal in industrial floors and demanding applications.

Composite Efficiency

Works with concrete as a composite, giving superior strength and a thinner floor.

Galvanized or Prime-Painted Finish

Choose G60/G90 galvanized or prime-painted for durability and corrosion resistance.

Saves Concrete

Reduces concrete use and lowers material cost without losing strength.

SDI Compliance

Meets Steel Deck Institute (SDI) and ANSI guidelines, ensuring quality and code compliance.

Optimized for Long Spans

Spans greater distances with minimal deflection.

Installation and connections

Installation practices

  • Install the deck perpendicular to the supports.
  • Attach at every support with puddle welds or TEK screws.
  • Overlap sidelaps and fasten with screws at 12" o.c.

Fasteners and attachments

  • 5/8" diameter puddle welds
  • Fasten the edges with #10 TEK screws at 6" o.c.
  • Attach sidelaps with #10 TEK screws at 12" o.c.

Confirm the profile, gauge, span, loads and connections against your project drawings and the applicable product load tables before ordering.

Applications

Composite Floor Systems

Composite Floor Systems

Bonds to concrete slabs, reducing deflection and increasing strength for heavy-duty floors in multi-story commercial and residential buildings.

Mezzanine Flooring

Mezzanine Flooring

A durable base for warehouse and industrial mezzanines that supports heavy loads and installs efficiently.

Standards and product documentation

The 2" composite floor deck is built to SDI (Steel Deck Institute) specifications, so builders in Hialeah get dependable design and performance.

2" Composite Floor Deck questions

What is the 2" composite floor deck mainly used for?

It supports concrete slabs as permanent formwork and forms a composite system that increases structural strength and load-bearing capacity.

Which gauges are offered for Hialeah projects?

22 GA through 16 GA. Thicker gauges suit heavier loads and longer spans.

Which finishes can I choose?

Galvanized (G60 or G90) for superior corrosion resistance, prime-painted, or bare steel.

Is it available in custom lengths?

Yes, cut to any length from 6'-0" to 40'-0", with minimal waste.

What makes it right for demanding applications?

Its deeper 2 inch profile supports greater spans and heavier loads than shallower deck.

3" Composite Floor Deck

The 3" composite floor deck is a strong choice for floor systems with longer spans and higher load demands in Hialeah. It has a 3 inch depth, comes in 22 GA to 16 GA, and offers superior strength and durability. It meets SDI and ANSI standards and is offered with G60 and G90 galvanized finishes for corrosion resistance.

Dimensions and profile

3" Composite Floor Deck profile dimensions
3" Composite Floor Deck dimensions
PropertyDimension
Profile Depth3 inches
Coverage Width36 inches
Rib Spacing12 inches (center to center)
Rib Height3 inches

This profile has a 3 inch rib depth and 36 inch standard coverage width for superior strength in heavy-duty composite floor systems. Rib spacing is 12 inches (center to center), with a 36 inch overall material width, which provides efficient overlaps and excellent concrete bonding. It is engineered for maximum load capacity and extended spans in demanding construction.

Gauges and thicknesses

3" Composite Floor Deck gauges
GaugeBare steel thickness (in)Weight (lbs/sq ft)Typical applications
220.02951.6Light-duty roofing and small spans.
200.03582Medium spans, roofing, and siding.
180.04742.6Heavy-duty applications.
160.05983Heavy load spans.

The 3" composite floor deck is available in gauges 22 to 16, giving options for varied load and span requirements. Choose lightweight, economical 22 and 20 gauge for shorter spans and lighter loads. Choose 18 and 16 gauge when longer spans and heavier loads call for more structural strength and reliability in demanding use.

Finishes and coatings

3" Composite Floor Deck finishes
FinishDetails
Galvanized G60Zinc coating of 0.6 oz/ft². Recommended for general environments.
Galvanized G90Zinc coating of 0.9 oz/ft². Ideal for highly corrosive environments.
Prime-PaintedProvides a base coat for additional protection or paint adhesion.
Bare SteelUnfinished; typically for indoor use or controlled environments.

The 3" composite floor deck is offered in several finishes, including galvanized (G60 and G90) and prime-painted, for durability over time. Galvanized finishes resist corrosion well, and G90 carries a higher zinc coating for environments with more moisture or chemical exposure. Prime-painted deck has a protective base coat for projects needing paint or other coatings.

Material and finish options

Made from high-performance 50 KSI steel, the 3" composite floor deck can be galvanized to SDI/ANSI standards, painted for enhanced aesthetics, or left bare for specialized applications. In all cases it is built for durable, reliable performance in diverse construction settings.

Custom lengths

Custom lengths start at 6′-0″ for small projects and reach 40′-0″ for larger structures. Cutting deck to your needs means a good fit and little material wasted. Contractors in Hialeah can specify exact cut lengths.

3" Composite Floor Deck features

With our 3" composite floor deck you get exceptional strength, extended spans, and dependable concrete bonding, a good match for heavy-duty, efficient, and sustainable floors.

Exceptional Load Strength

Handles heavy loads, so it works well in industrial applications and tough construction conditions.

Composite Efficiency

Works in harmony with concrete as a composite, which thins the floor while maximizing strength.

Galvanized or Prime-Painted Finish

G60/G90 galvanized or prime-painted finishes improve durability and corrosion resistance.

Fire-Rating Compatible

Supports fireproofing materials and fire ratings, adding safety to commercial and residential projects.

SDI and ANSI Compliant

Meets Steel Deck Institute (SDI) and ANSI guidelines to ensure quality and code compliance.

Extended Spans

A 3 inch profile spans longer distances and reduces additional supports on big projects.

Installation and connections

Installation practices

  • Install the deck perpendicular to the supports.
  • At each support, weld or screw the deck down with puddle welds or TEK screws.
  • Overlap sidelaps and fasten them with screws at 12" o.c.

Fasteners and attachments

  • Puddle welds, 5/8" diameter
  • #10 TEK screws at 6" o.c. on edges, 12" o.c. on sidelaps
  • Sidelap fastening with #10 TEK screws at 12" o.c.

Confirm the profile, gauge, span, loads and connections against your project drawings and the applicable product load tables before ordering.

Applications

Long-Span Composite Floors

Long-Span Composite Floors

Suited to long spans that reduce the need for columns, the 3" Composite Floor Deck boosts structural efficiency and supports heavy loads in warehouses, distribution centers, and big commercial spaces.

Heavy Equipment Platforms

Heavy Equipment Platforms

In industrial facilities and manufacturing plants, the 3" Composite Floor Deck builds durable platforms for heavy machinery that handle concentrated loads and distribute them better.

Standards and product documentation

For Hialeah projects, the 3" composite floor deck complies with SDI (Steel Deck Institute) specifications, ensuring high standards for design and performance.

3" Composite Floor Deck questions

What is the 3" composite floor deck mainly for?

The 3" Composite Floor Deck gives concrete slabs excellent structural support as permanent formwork and creates a composite system suited to long spans and heavy loads.

Which gauges does the 3" composite floor deck come in for Hialeah projects?

Gauges run from 22 GA to 16 GA, offering flexibility for different load capacities and structural needs.

Which finishes does the 3" composite floor deck offer?

Galvanized (G60 or G90) for corrosion resistance, prime-painted for projects needing extra coatings, and bare steel for particular applications.

Can the 3" composite floor deck be cut to custom lengths?

Yes. Lengths of 6'-0" to 40'-0" can be cut to order, so it fits well and wastes less material on site.

Why use the 3" composite floor deck on large projects?

Its 3 inch depth supports longer spans and heavier loads, so it is often preferred for industrial facilities, warehouses, and multi-story projects that need maximum durability.

9/16" Type S Form Deck

Slab construction in floors and roofs relies on Type S Form Deck as permanent formwork, thanks to its strength and straightforward installation. Gauges run from 28 GA to 20 GA, and manufacturing meets SDI and ANSI standards. It is a regular choice for Hialeah concrete work.

Dimensions and profile

9/16" Type S Form Deck profile dimensions
9/16" Type S Form Deck dimensions
PropertyDimension
Profile Depth9/16 inches
Coverage Width36 inches
Rib Spacing2.57 inches (center to center)
Rib Height9/16 inches

With a shallow rib depth of 9/16 inch and a standard 36-inch coverage width, Type S Form Deck is well suited to quick concrete slab forming. Ribs sit 2.57 inches apart (center to center), giving a steady forming surface that limits concrete volume while keeping the structure sound.

Gauges and thicknesses

9/16" Type S Form Deck gauges
GaugeBare steel thickness (in)Weight (lbs/sq ft)Typical applications
280.01490.65Light-duty concrete formwork, low-load applications.
260.01790.75Standard concrete slabs.
240.02391.0Medium-duty floor and roof slabs.
220.02991.25Medium-duty floors, multi-level buildings.
200.03581.5Heavy-duty formwork, bridges.

Five gauges are offered for Type S Form Deck: 28, 26, 24, 22, and 20. Choose 28 or 26 for cost-effective standard concrete slabs. Where spans are longer or concrete loads heavier, as with bridges and industrial floors, gauges 22 and 20 give superior strength.

Finishes and coatings

9/16" Type S Form Deck finishes
FinishDetails
Galvanized G60Zinc coating of 0.6 oz/ft². Recommended for general environments.
Galvanized G90Zinc coating of 0.9 oz/ft². Ideal for highly corrosive environments.
Prime-PaintedProvides a base coat for additional protection or paint adhesion.
Bare SteelUnfinished; typically for indoor use or controlled environments.

Finish choices for Type S Form Deck are galvanized (G60 and G90) and prime-painted. The galvanized coatings resist corrosion, and G90 adds protection where conditions are highly corrosive. Both G60 and G90 conform to ASTM A653.

Material and finish options

Our Type S Form Deck is made from high-strength 80 KSI steel. Choose a corrosion-resistant galvanized finish that meets SDI/ANSI standards, one of several painted finishes for a tailored look, or bare steel for custom applications. Every finish is meant to improve durability and keep performance steady in demanding environments.

Custom lengths

From 6′-0″ pieces for smaller projects to spans reaching 40′-0″ for larger construction, we supply the dimensions you need. Our custom length service is set up around your requirements, so the deck fits well and little material is wasted.

9/16" Type S Form Deck features

Type S Form Deck delivers high structural strength, efficient concrete forming, and corrosion-resistant finishes at a sensible price. It adapts well to multi-level buildings, bridges, and tunnels.

High Structural Strength

Built to carry a concrete slab, this deck keeps the structure strong and stable both while concrete is placed and after it sets.

Efficient Concrete Formwork

A fast-to-install form deck for slabs in multi-level buildings, bridges, and tunnels, cutting both labor time and material costs.

Galvanized or Prime-Painted Finish

Pick G60/G90 galvanized or prime-painted finishes for better durability and corrosion resistance in demanding environments.

Cost-Effective Solution

The lightweight, shallow profile uses less concrete and still gives a stable forming surface, which lowers total project cost.

Compliance with SDI Standards

Manufactured to Steel Deck Institute (SDI) and ANSI guidelines for quality and code compliance.

Versatile Design Options

Offered in gauges 28 through 20, with G60/G90 galvanized coatings and custom lengths from 6 to 40 feet.

Installation and connections

Installation practices

  • Run the deck perpendicular to the supports.
  • Secure it to each support using pins, powder-actuated fasteners, or TEK screws.
  • Lap the sidelaps, then fasten with screws at 12" o.c.

Fasteners and attachments

  • Pins or powder-actuated fasteners secure the deck to the supports
  • #10 TEK screws at 6" o.c. on edges and 12" o.c. for sidelaps
  • Sidelaps fastened by button punching or #10 TEK screws at 12" o.c.

Confirm the profile, gauge, span, loads and connections against your project drawings and the applicable product load tables before ordering.

Applications

Composite Floor Slabs

Composite Floor Slabs

Slab forming in multi-level buildings, bridges, and tunnels is an ideal fit. The shallow rib profile cuts concrete volume and provides an efficient, stable forming surface.

Bridge and Tunnel Formwork

Bridge and Tunnel Formwork

Type S Form Deck sees wide use as permanent concrete formwork in bridge decks and tunnels, where it supports the structure during concrete placement.

Standards and product documentation

SDI (Steel Deck Institute) specifications and ANSI standards govern Type S Form Deck, supporting high standards of design and performance.

9/16" Type S Form Deck questions

What does Type S form deck do?

Type S form deck is permanent formwork for concrete slabs in floor and roof systems. It provides a stable base during the pour and remains in place after the concrete cures.

What separates form deck from composite deck?

Form deck is just formwork, and after curing the concrete slab bears the load by itself. Composite deck bonds with the concrete structurally and shares the load for good.

What gauges can I order in Type S form deck?

Choose from 28, 26, 24, 22, and 20 GA, with thickness from 0.0149" up to 0.0358".

What are the recommended fastening methods?

Pins, powder-actuated fasteners, or TEK screws attach Type S Form Deck. For sidelaps, use button punching or #10 TEK screws at 12" o.c.

Can Hialeah projects get Type S form deck in custom lengths?

Yes, lengths from 6'-0" to 40'-0" are available. This limits waste and gives a precise fit on each project.

1" Type HD Form Deck

Heavy-duty concrete formwork in floors and roofs is the purpose of Type HD Form Deck, which delivers strong support and durability. Gauges run from 26 GA to 20 GA, so it copes with greater loads and longer spans. SDI and ANSI standards apply, and galvanized finishes such as G60 and G90 improve corrosion resistance for Hialeah projects.

Dimensions and profile

1" Type HD Form Deck profile dimensions
1" Type HD Form Deck dimensions
PropertyDimension
Profile Depth1 inch
Coverage Width36 inches
Rib Spacing4 inches (center to center)
Rib Height1 inch

Heavy-duty concrete formwork in floors and roofs is where Type HD Form Deck fits best, with a 1-inch rib depth and 36-inch coverage width. Rib spacing is 4 inches (center to center), and the 39-inch overall material width makes for secure overlaps and excellent concrete support. The profile takes on greater loads and reduces material costs, giving strength and durability for demanding projects.

Gauges and thicknesses

1" Type HD Form Deck gauges
GaugeBare steel thickness (in)Weight (lbs/sq ft)Typical applications
260.01790.75Light-duty concrete formwork, low-load floors.
240.02391.0Standard floors, light industrial applications.
220.02991.25Medium-duty floors, parking structures.
200.03591.5Heavy-duty formwork, bridges, industrial slabs.

Choose from gauges 26, 24, 22, and 20 for Type HD Form Deck. The lighter gauges, 26 and 24, are cost-effective for standard concrete slabs and moderate spans. Gauges 22 and 20 give superior strength and support over longer spans and heavier concrete loads, which makes them right for industrial floors, bridges, and parking structures.

Finishes and coatings

1" Type HD Form Deck finishes
FinishDetails
Galvanized G60Zinc coating of 0.6 oz/ft². Recommended for general environments.
Galvanized G90Zinc coating of 0.9 oz/ft². Ideal for highly corrosive environments.
Prime-PaintedProvides a base coat for additional protection or paint adhesion.
Bare SteelUnfinished; typically for indoor use or controlled environments.

For durability and long-term performance, Type HD Form Deck is supplied in galvanized (G60 and G90) and prime-painted finishes. Galvanizing gives excellent corrosion resistance, and G90 has a thicker zinc layer to protect in high-moisture or chemical environments. The prime-painted finish adds a protective base coat. G60 and G90 finishes conform to ASTM A653 specifications.

Material and finish options

High-strength 80 KSI steel is the base of Type HD Deck. A corrosion-resistant galvanized finish meeting SDI/ANSI standards is available, along with a variety of painted finishes for tailored aesthetics and bare steel for custom applications. Each is designed to improve durability and maintain performance in demanding environments.

Custom lengths

Pick deck lengths from 6′-0″ for smaller projects to 40′-0″ for large spans. We work to your specified dimensions, with the aim of an optimal fit and minimal waste.

1" Type HD Form Deck features

Heavy-duty load support, efficient concrete bonding, and enhanced durability define our 1" Type HD Form Deck, a strong pick for industrial floors, bridge formwork, and demanding structural applications in Hialeah.

Heavy-Duty Load Support

Built for higher concrete loads, the Type HD Form Deck suits projects that demand superior strength and stability.

Efficient Concrete Bonding

A deep profile supports thicker concrete slabs, which improves load distribution and long-term performance.

Galvanized or Prime-Painted Finish

G60/G90 galvanized or prime-painted finishes improve durability and corrosion resistance.

Cost-Effective Formwork Solution

Suited to heavy-duty uses such as parking structures, bridge formwork, and industrial floors, and it adjusts readily to complex construction needs.

Compliance with SDI Standards

Meets Steel Deck Institute (SDI) and ANSI guidelines for quality and code compliance.

Versatile Gauge Options

26 GA to 20 GA are offered, giving flexibility for specific load requirements while keeping durability.

Installation and connections

Installation practices

  • Place the deck at right angles to the supports.
  • Attach the deck at every support with pins, powder-actuated fasteners, or TEK screws.
  • Lap sidelaps and fasten with screws at 12" o.c.

Fasteners and attachments

  • Deck is fixed to supports with pins or powder-actuated fasteners
  • #10 TEK screws at 6" o.c. on edges and 12" o.c. for sidelaps
  • Sidelaps joined by button punching or #10 TEK screws at 12" o.c.

Confirm the profile, gauge, span, loads and connections against your project drawings and the applicable product load tables before ordering.

Applications

Heavy Industrial Floor Systems

Heavy Industrial Floor Systems

For heavy industrial floors, Type HD Form Deck supports high-load equipment and machinery. Its durable design keeps performing in demanding industrial environments.

Bridge and Highway Formwork

Bridge and Highway Formwork

Type HD Form Deck is a common permanent formwork in bridge and highway construction. It carries heavy concrete loads during placement and adds lasting strength to the structure.

Standards and product documentation

Type HD Form Deck is produced to SDI (Steel Deck Institute) specifications, which keeps design and performance standards high.

1" Type HD Form Deck questions

What is Type HD Form Deck primarily for?

Permanent formwork for heavy-duty concrete slabs in industrial floors, bridges, and infrastructure projects. It supports wet concrete during placement and remains after curing.

Which gauges are offered in Type HD Form Deck?

Gauges 26 GA, 24 GA, 22 GA, and 20 GA, which accommodate different load capacities and project requirements.

Does Type HD Form Deck call for temporary shoring in Hialeah?

It may. Temporary shoring can be required during installation to support the deck and wet concrete weight until the slab has fully cured.

What is the recommended way to fasten Type HD Form Deck?

It is typically attached with pins, powder-actuated fasteners, or TEK screws, and sidelaps are secured with button punching or screws at 12" o.c.

Does Type HD Form Deck come in custom lengths?

Yes, from 6'-0" to 40'-0", which minimizes waste and fits each project precisely.

Type BI Inverted Form Deck

Exposed-soffit architectural ceilings call for Type B Inverted Form Deck, which also acts as permanent formwork for concrete slabs in floor and roof systems. Gauges range from 22 GA through 16 GA. Schools, offices, and commercial facilities in Hialeah are among its common uses.

Dimensions and profile

Type BI Inverted Form Deck profile dimensions
Type BI Inverted Form Deck dimensions
PropertyDimension
Profile Depth1.5 inches
Coverage Width36 inches
Rib Spacing6 inches (center to center)
Rib Height1.5 inches

Type BI Inverted Form Deck has a 1.5-inch rib depth and a standard 36-inch coverage width. Ribs face upward when it is installed, so a smooth, flat soffit shows below and works as an architectural ceiling with no added finish. Rib spacing of 6 inches (center to center) keeps the structure sound and still accommodates concrete placement.

Gauges and thicknesses

Type BI Inverted Form Deck gauges
GaugeBare steel thickness (in)Weight (lbs/sq ft)Typical applications
220.02991.25Light-duty floors and ceilings.
200.03581.5Standard commercial floor systems.
180.04742.6Heavy-duty applications, parking structures.
160.05983.0Heavy load industrial floors.

The gauge lineup for Type BI Inverted Form Deck is 22, 20, 18, and 16. Standard commercial applications suit the lighter gauges (22 and 20). When you need more strength for parking structures or heavy industrial floor systems, use gauges 18 and 16.

Finishes and coatings

Type BI Inverted Form Deck finishes
FinishDetails
Galvanized G60Zinc coating of 0.6 oz/ft². Recommended for general environments.
Galvanized G90Zinc coating of 0.9 oz/ft². Ideal for highly corrosive environments.
Prime-PaintedProvides a base coat for additional protection or paint adhesion.
Bare SteelUnfinished; typically for indoor use or controlled environments.

Galvanized (G60 and G90) and prime-painted finishes are available for Type BI Inverted Form Deck. Galvanizing resists corrosion, and G90 adds protection in highly corrosive environments. G60 and G90 finishes conform to ASTM A653.

Material and finish options

High-strength steel makes up our Type BI Inverted Form Deck. Order it galvanized for corrosion resistance to ANSI/SDI standards, with one of many painted finishes for tailored aesthetics, or as bare steel when the application is custom. Every finish aims to build durability and sustain performance.

Custom lengths

Need 6′-0″ lengths for a small project or spans up to 40′-0″ for a large one? We handle both. Our custom length service is built around your requirements for Hialeah and beyond, so the deck fits optimally and waste stays minimal.

Type BI Inverted Form Deck features

Type BI Inverted Form Deck offers high structural strength, efficient formwork, and corrosion-resistant finishes. It fits architectural ceilings, multi-level parking structures, and commercial floor systems that need exposed soffits.

High Structural Strength

It carries concrete and live loads, and the underside becomes an architecturally finished exposed ceiling.

Efficient Formwork

Because the deck stays in place as permanent formwork for concrete slabs, labor and construction time drop and temporary forms never need removing.

Corrosion Resistance

For lasting corrosion resistance in commercial environments, choose G60/G90 galvanized or prime-painted finishes.

Cost-Effective

By combining formwork with structural support, it lowers material and labor costs where ceilings are left exposed.

Compliance with Standards

Conforms to SDI and ANSI guidelines for quality and code compliance in all applications.

Versatile Options

Gauges from 22 to 16 GA and multiple finishes are available to meet varying load and architectural needs.

Installation and connections

Installation practices

  • Set the deck perpendicular to the supports with the ribs pointing upward.
  • Use pins, powder-actuated fasteners, or TEK screws to fasten at each support.
  • Lap sidelaps and secure them at 12" o.c. with button punching or screws.

Fasteners and attachments

  • Pins or powder-actuated fasteners secure the deck to supports
  • #10 TEK screws at 6" o.c. on edges
  • Sidelaps attached through button punching or #10 TEK screws at 12" o.c.

Confirm the profile, gauge, span, loads and connections against your project drawings and the applicable product load tables before ordering.

Applications

Industrial Flooring with Exposed Ceiling

Industrial Flooring with Exposed Ceiling

Strong support for industrial floor systems plus an architecturally finished exposed soffit, which suits schools, offices, and civic buildings.

Multi-Level Parking Structures

Multi-Level Parking Structures

A frequent choice for parking garages, giving permanent formwork and a clean exposed underside that cuts finishing costs.

Standards and product documentation

SDI (Steel Deck Institute) specifications and ANSI standards apply to Type BI Inverted Form Deck, which supports high standards of design and performance.

Type BI Inverted Form Deck questions

What is Type BI inverted form deck used for?

Architectural ceiling systems, multi-level parking structures, schools, offices, and any facility where an attractive exposed soffit is wanted.

How does installing Type BI differ from standard form deck?

Type BI is laid inverted with the ribs up. That leaves the flat side exposed below as a finished ceiling, with no extra finishing materials.

Which gauges does Type BI come in?

22, 20, 18, and 16 GA, giving options for different structural requirements.

What finishes does Type BI come with?

G60 and G90 galvanized finishes resist corrosion, and prime-painted finishes provide extra protection.

Can I get Type BI cut to length in Hialeah?

Yes, custom lengths from 6'-0" to 40'-0" are available, ensuring a precise fit and minimal waste.

Planning your order

Steel Deck supply for Hialeah

Send your project drawings or material list so our team can review quantities, profile requirements and cut lengths. We can help with takeoffs and shop drawings, then confirm pricing and delivery options for your Hialeah project.

Send your drawings for a quote

What to include in your quote request

  • The profile, gauge and finish shown in your specifications.
  • Quantities and lengths, or the drawings we can take them off from.
  • The Hialeah job site address, your target delivery date and any access limits.
  • Load tables, attachment details or other documents your engineer specified.

How We Work

We Guide You Through the Process

From manufacturing to delivery, we ensure precision, efficiency, and compliance with industry standards.

01
01

Takeoff and Shop Drawings Services

We provide specialized takeoff services for accurate quotations and detailed shop drawings to produce optimized cutting lists for sheets, ensuring efficient execution and waste-free outcomes in your projects.

02
02

Manufacture

We manufacture metal decks to SDI and ANSI standards, ensuring strength, durability, and compliance. We provide custom lengths and high-precision fabrication for optimized performance in roof, floor, and form deck applications.

03
03

Swift Deliveries & Nationwide Reach

While based in South Florida, we serve clients nationwide, ensuring quality, efficiency, and timely deliveries across the U.S., reflecting our commitment to excellence without boundaries.

Frequently Asked Questions

Where can I get steel deck in Hialeah?

Miami Metal Deck delivers to Hialeah with same-day pickup in Miami Gardens and 1-day delivery to most Florida cities. Call 305-760-2575.

Do you provide shop drawings?

Yes. We offer complete takeoff services, shop drawings, and optimized cutting lists for all steel deck orders.

What steel deck products does Miami Metal Deck sell?

Roof deck (Type B, Vented Type B, Type N), composite floor deck in several profiles, and form deck (Type S, HD, BI). Each is offered in various gauges and galvanized finishes.

Roof deck, composite deck, form deck: how do they differ?

Roof deck is built to support insulation and roofing systems. Composite deck bonds with poured concrete to make a load-bearing floor slab. Form deck is concrete formwork, temporary or permanent.

Which gauges and finishes are available?

Depending on the product type, we stock gauges 16 to 28. Galvanized finishes come in G60 and G90, and custom lengths run from 6 to 40 feet.

Do you help with takeoffs and shop drawings?

We do. Our engineering team offers specialized takeoff services, detailed shop drawings, and optimized cutting lists for accurate quotations and efficient project execution in Hialeah and elsewhere.

What standards do the products follow?

Steel deck products comply with ANSI/SDI standards (RD-2017 for roof deck, C-2017 for composite floor deck, NC-2017 for non-composite form deck), and we are a Steel Deck Institute member.

Phone

305 760 25 75

E-Mail

info@mmdeck.com

Address

16000 NW 49th Ave Suite A, Miami Gardens, FL 33014

Get a Free Quote