SDI Member · ANSI/SDI compliant
Steel Deck Supplier in Miami
High-performance steel deck in Miami for durable, efficient structures. Roof deck, composite floor deck, and form deck.
Steel Deck for Miami job sites
Builders in Miami order Steel Deck directly from Miami Metal Deck for commercial and industrial projects throughout Miami-Dade County and the South Florida region. Because Miami is in South Florida, stock items can be picked up the same day at our Miami Gardens facility or delivered the same day to your site.
With Miami's coastal humidity and salt air, many engineers specify a G90 galvanized finish for its heavier zinc coating; we confirm the finish against your project specifications. Miami-Dade County falls within the Florida Building Code's High-Velocity Hurricane Zone (HVHZ). Send us the deck and attachment requirements on your drawings so we can supply the specified gauge and lengths.
Product guide
Product specifications for your Miami project
Compare profiles, dimensions, material options and applications to prepare your order. Select a product below to explore its technical details.
1.5" Type B Roof Deck
A dependable roofing choice, the 1.5 Type B metal deck is supplied from Miami, Florida and installs without fuss. Structural strength is excellent, gauges run from 22 GA to 16 GA, and the deck meets SDI and ANSI standards. Galvanized finishes such as G60 and G90 add corrosion resistance and durability, which helps contractors for projects in Miami match the deck to the job.
Dimensions and profile
| Property | Dimension |
|---|---|
| Profile Depth | 1.5 inches |
| Coverage Width | 36 inches |
| Rib Spacing | 6 inches (center to center) |
| Rib Height | 1.5 inches |
This 1.5" Type B metal deck has a 1.5 inch rib depth and a standard coverage width of 36 inches, which makes it structurally efficient for roofing and flooring. Ribs sit 6 inches apart (center to center), and the 39 inch overall material width gives secure overlaps and strong composite action with concrete slabs. The profile maximizes strength at minimal weight, so it works across many kinds of construction.
Gauges and thicknesses
| Gauge | Bare steel thickness (in) | Weight (lbs/sq ft) | Typical applications |
|---|---|---|---|
| 22 | 0.0295 | 1.6 | Light-duty roofing and small spans. |
| 20 | 0.0358 | 2 | Medium spans, roofing, and siding. |
| 18 | 0.0474 | 2.6 | Heavy-duty applications. |
| 16 | 0.0598 | 3 | Heavy load spans. |
There are four gauges to choose from for Type B deck: 22, 20, 18, and 16. Each has different thickness and load capacity, so you can fit the deck to the project. Light and cost-effective, 22 and 20 gauge are best on shorter spans and lighter loads. Stronger 18 and 16 gauge carry longer spans and heavier loads, which makes them ideal for demanding applications.
Finishes and coatings
| Finish | Details |
|---|---|
| Galvanized G60 | Zinc coating of 0.6 oz/ft². Recommended for general environments. |
| Galvanized G90 | Zinc coating of 0.9 oz/ft². Ideal for highly corrosive environments. |
| Prime-Painted | Provides a base coat for additional protection or paint adhesion. |
| Bare Steel | Unfinished; typically for indoor use or controlled environments. |
Several finishes are available so the Type B deck lasts, among them galvanized (G60 and G90) and prime-painted. All galvanized finishes resist corrosion, but G90 has more zinc and is better where moisture or chemicals are a bigger concern. A prime-painted deck arrives with a protective base coat, so it works well when more coats of paint or coatings will follow.
Material and finish options
Material grades include high-strength steel at 33 KSI, 40 KSI, 50 KSI, and 80 KSI. Each grade answers a specific structural need and strikes a balance between strength and flexibility. Galvanized (G60/G90) and prime-painted finishes both follow ASTM A653 specifications for corrosion resistance.
Custom lengths
From 6′-0″ pieces on smaller projects to spans of 40′-0″ on larger ones, we handle every dimension with precision and efficiency. Our custom length service is built around your specifications, so the deck fits well and little material is wasted on Miami jobs.
1.5" Type B Roof Deck features
Our 1.5" Type B metal deck combines light weight with durability, fire resistance, and a sustainable design. It suits efficient short-span commercial work and eco-conscious building programs.
High Strength-to-Weight Ratio
Carries heavy loads while keeping weight down, which makes it a good match for roofing systems.
Standard 36 inches Coverage
The 36-inch coverage and consistent rib pattern cut installation time and raise jobsite efficiency.
Galvanized or Prime-Painted Finish
Pick G60/G90 galvanized or a prime-painted finish for better durability and corrosion resistance.
Compatibility with Roofing Systems
Works with roofing assemblies that include insulation, waterproofing, reflective coatings, drainage, ventilation, and related components.
Compliance with Standards
Follows Steel Deck Institute (SDI) and ANSI guidelines, so quality and code compliance are built in.
Wide Gauge Range
Offered in 22, 20, 18, and 16 gauges so you can tailor the deck to the load requirements of your project.
Installation and connections
Installation practices
- Place the deck perpendicular to the supports.
- Secure the deck to each support using puddle welds or TEK screws.
- Overlap the sidelaps, then screw them down at 12" o.c.
Fasteners and attachments
- 5/8" Diameter Puddle Welds
- #10 TEK screws at 6" o.c. on edges, and 12" o.c. for sidelaps
- Sidelaps attached using #10 TEK screws at 12" o.c.
Confirm the profile, gauge, span, loads and connections against your project drawings and the applicable product load tables before ordering.
Applications
Roof Deck Applications
Commercial and industrial roof systems that demand structural strength and durability rely heavily on Type B. It carries roofing insulation systems and works for vented as well as non-vented roofs.
Hybrid Structural-Ceiling Systems
Type B can also serve as an exposed ceiling in architectural spaces. It gives structural strength and a clean look while trimming extra materials and installation time.
Standards and product documentation
The 1.5" Type B deck meets SDI (Steel Deck Institute) specifications, which sets a high bar for design and performance on Miami projects.
1.5" Type B Roof Deck questions
Which gauge is typical for Type B decking?
20 gauge is generally the most common, as it balances cost and strength for typical applications. Other gauges may be needed depending on project-specific requirements.
G60 versus G90 galvanized: what is the difference?
G60 carries 0.60 oz/ft² of coating, and G90 carries 0.90 oz/ft². The extra 50% zinc in G90 gives greater corrosion resistance. Use G60 indoors or in low-moisture environments. Use G90 outdoors, on roofing and steel decking, and on structures exposed to weather, humidity, or corrosive conditions.
What maximum spans can the 1.5" Type B deck achieve?
Maximum spans vary with gauge, span type, and load requirements. 22-gauge decks, for example, can span up to 8 feet under multiple spans, while 16-gauge decks can span up to 14 feet. Always consult load tables for precise details.
Is customization available for 1.5" Type B metal decking on Miami jobs?
Yes. Gauge, finish, and length can be customized. Cutting lengths to project needs reduces waste and optimizes installation efficiency.
Does 1.5" Type B metal decking satisfy industry standards?
Yes. Steel Deck Institute (SDI) standards and American Iron and Steel Institute (AISI) design guidelines are both met, which ensures quality, safety, and compatibility with construction codes.
3" Type N Roof Deck
Because of its long-span capability and structural strength, 3" Type N metal deck is widely specified for roofs. The Type N profile is 3 inches deep, with gauges from 22 GA to 16 GA for flexibility on roofing projects for projects in Miami. It complies with SDI and ANSI standards and is offered in galvanized finishes such as G60 and G90.
Dimensions and profile
| Property | Dimension |
|---|---|
| Profile Depth | 3 inches |
| Coverage Width | 24 inches |
| Rib Spacing | 8 inches (center to center) |
| Rib Height | 3 inches |
A 3 inch profile depth and a 24 inch coverage width define the Type N Roof Deck, which also has 8 inch rib spacing (center to center) and a 3 inch rib height. The deep rib is what gives the profile its strength on long spans and heavy roof loads, and the wide coverage means fewer sheets to set.
Gauges and thicknesses
| Gauge | Bare steel thickness (in) | Weight (lbs/sq ft) | Typical applications |
|---|---|---|---|
| 22 | 0.0295 | 1.8 | Light duty roofs. |
| 20 | 0.0358 | 2.2 | Standard commercial roofs. |
| 18 | 0.0474 | 2.9 | Heavy load areas. |
| 16 | 0.0598 | 3.7 | Long spans, high loads. |
Gauges for Type N deck include 22, 20, 18, and 16, giving a spread of thicknesses and load capacities for each project. Lightweight, cost-effective 22 and 20 gauge fit shorter spans and lighter loads. For demanding applications, 18 and 16 gauge deliver greater structural strength and support longer spans and heavier loads.
Finishes and coatings
| Finish | Details |
|---|---|
| Galvanized G60 | Zinc coating of 0.6 oz/ft². Recommended for general environments. |
| Galvanized G90 | Zinc coating of 0.9 oz/ft². Ideal for highly corrosive environments. |
| Prime-Painted | Provides a base coat for additional protection or paint adhesion. |
| Bare Steel | Unfinished; typically for indoor use or controlled environments. |
Type N deck is available with several finishes for lasting performance, including galvanized (G60 and G90) and prime-painted. Galvanizing resists corrosion well, and G90 has a heavier zinc coating for environments with more moisture or chemical exposure. Prime paint adds a base coat, so it fits projects that call for extra paint or coatings.
Material and finish options
Our Type N 3" Roof Deck uses high-strength 80 KSI steel. It is offered with a corrosion-resistant galvanized finish meeting ANSI standards, prime-painted finishes for added protection, or bare steel for specialized applications. Each finish is engineered for durability and dependable performance in demanding roofing environments.
Custom lengths
Whether a smaller roofing job needs deck as short as 6′-0″ or a large-scale build needs up to 40′-0″, the 3" Type N Roof Deck is delivered with accuracy and efficiency. Our custom length service for Miami projects ensures an optimal fit, reduced waste, and streamlined installation.
3" Type N Roof Deck features
Superior strength, fire-rated performance, and long-span efficiency come standard with our 3" Type N roof deck, ideal for large-scale commercial roofing and sustainable building applications.
Deep Rib Profile for High Strength
A 3-inch rib depth provides superior strength for longer spans and heavy roofing loads.
Wide Coverage Efficiency
Standard 24-inch coverage uses less material and makes installation simpler, a plus on large-scale projects.
Corrosion-Resistant Finish Options
G60 or G90 galvanized finishes stand up well to harsh environmental conditions.
Fire and Acoustic Performance
Satisfies fire-rating standards in approved assemblies, and supports insulation for soundproofing and thermal efficiency.
Compliance with SDI Standards
Steel Deck Institute (SDI) and ANSI guidelines are met, ensuring quality and code compliance.
Long Span Capability
Gauges of 22, 20, 18, and 16 let you customize the deck to specific load-bearing requirements and project demands.
Installation and connections
Installation practices
- Lay the deck perpendicular to the supports.
- Fasten the deck at every support with puddle welds or TEK screws.
- Overlap sidelaps and secure them with screws at 12" o.c. (on center).
Fasteners and attachments
- 5/8" Diameter Puddle Welds
- #12 or #14 TEK screws at 6" o.c. on edges, and 12" o.c. for sidelaps
- Sidelaps attached using #12 TEK screws at 12" o.c.
Confirm the profile, gauge, span, loads and connections against your project drawings and the applicable product load tables before ordering.
Applications
Long-Span Roofing Systems
Type N is perfect for large-scale commercial and industrial roofing that requires long spans and fewer supports. Its 3-inch rib profile ensures exceptional strength and efficiency in expansive roof designs.
Fire-Rated Roof Assemblies
Type N is commonly used in fire-rated roof systems and is compatible with insulation and fireproofing materials. It ensures safety and performance for demanding commercial and industrial applications.
Standards and product documentation
For Miami roofing projects, the 3" Type N deck complies with SDI (Steel Deck Institute) specifications, supporting high standards for design and performance.
3" Type N Roof Deck questions
What are the typical uses of 3" Type N Roof Deck?
Long-span roofing is its purpose. It provides structural support for commercial and industrial roof systems.
What spans can Type N Roof Deck handle?
Span depends on gauge, and Type N Deck can reach up to 16 feet, which reduces intermediate supports.
Which gauges are offered for the 3" Type N Roof Deck?
You can choose from 16 GA to 22 GA to meet different load and span requirements.
Is Type N Roof Deck compatible with fire-rated roofing systems in Miami?
Yes. It supports fire-rated assemblies and works with insulation and fireproofing materials for enhanced safety.
Which finishes can I get on Type N Roof Deck?
Galvanized (G60 or G90) for corrosion resistance, plus prime-painted options for extra protection.
1.5" Type B Vented Roof Deck
Designed for Lightweight Insulated Concrete (LWIC) applications, the 1.5" Type B Vented Deck improves bonding and load distribution. This vented Type B profile is 1.5 inches deep and comes in gauges from 22 GA to 18 GA, so it adapts to different projects for projects in Miami. It complies with SDI and ANSI standards and is offered in galvanized finishes such as G60 and G90 for durability and corrosion resistance.
Dimensions and profile
| Property | Dimension |
|---|---|
| Profile Depth | 1.5 inches |
| Coverage Width | 36 inches |
| Rib Spacing | 6 inches (center to center) |
| Rib Height | 1.5 inches |
The 1.5" Type B Vented Deck has a 1.5 inch rib depth and a 36 inch standard coverage width, a good match for Lightweight Insulated Concrete (LWIC) applications. Rib spacing is 6 inches (center to center), and the 39 inch overall width allows secure overlaps and strong composite action with concrete slabs. Perforations in the profile promote adhesion and proper LWIC curing, which boosts strength, durability, and efficiency.
Gauges and thicknesses
| Gauge | Bare steel thickness (in) | Weight (lbs/sq ft) | Typical applications |
|---|---|---|---|
| 22 | 0.0295 | 1.6 | Light-duty roofing and small spans. |
| 20 | 0.0358 | 2 | Medium spans, roofing, and siding. |
| 18 | 0.0474 | 2.6 | Heavy-duty applications. |
| 16 | 0.0598 | 3 | Heavy load spans. |
Three gauges, 22, 20, and 18, make up the Type B Vented Deck lineup, with thickness and load capacity varying across them. For shorter spans, the lighter 22 and 20 gauges are cost-effective. When longer spans and heavier loads are involved, the thicker 18 gauge gives greater structural strength. Perforations also improve the bond with LWIC, helping it adhere and cure in insulated concrete applications.
Finishes and coatings
| Finish | Details |
|---|---|
| Galvanized G60 | Zinc coating of 0.6 oz/ft². Recommended for general environments. |
| Galvanized G90 | Zinc coating of 0.9 oz/ft². Ideal for highly corrosive environments. |
| Prime-Painted | Provides a base coat for additional protection or paint adhesion. |
| Bare Steel | Unfinished; typically for indoor use or controlled environments. |
Long-term performance comes from the galvanized (G60 and G90) and prime-painted finishes on the Type B Vented Deck. Galvanized coatings resist corrosion, and G90 gives extra protection in highly corrosive environments. Prime paint adds a base coat for projects that need further coatings. Together these finishes extend deck life and support performance in LWIC applications.
Material and finish options
The B 1.5" Vented Deck is made from high-strength 50 KSI steel. Options include a corrosion-resistant galvanized finish that meets ANSI/SDI standards, a range of painted finishes for tailored aesthetics, and bare steel for custom applications. Every finish is meant to improve durability and keep performance steady in demanding environments.
Custom lengths
Smaller projects can order deck as short as 6′-0″, and larger constructions can order spans up to 40′-0″. We deliver every length with precision and efficiency. With our custom length service for Miami customers, the deck matches your requirements, fits well, and wastes little.
1.5" Type B Vented Roof Deck features
Commercial applications that need ventilation and efficiency can count on the 1.5" Type B Vented Deck for lightweight durability, airflow control, and fire resistance.
Optimized for LWIC Systems
Built to improve adhesion in Lightweight Insulated Concrete (LWIC) applications for proper bonding and structural performance.
Improved Concrete Bonding
Perforations strengthen the bond between the deck and lightweight concrete, giving a robust roof system with better load distribution.
Structural & Fire Performance
SDI and ANSI compliant, with high durability and fire-rated performance in LWIC systems.
LWIC Roofing Applications
A strong fit for Lightweight Insulated Concrete (LWIC) roof systems, with strength, adhesion, and long-term performance in insulated roofing.
Compliance with SDI Standards
Steel Deck Institute (SDI) and ANSI guidelines are met, which assures quality and code compliance.
Moisture Management
Helps prevent trapped moisture, which improves durability and lowers the risk of mold or corrosion.
Installation and connections
Installation practices
- Install the deck perpendicular to the supports.
- Weld or screw the deck at each support with puddle welds or TEK screws.
- Overlap sidelaps and secure with screws at 12" o.c.
Fasteners and attachments
- 5/8" Diameter Puddle Welds
- #10 TEK screws at 6" o.c. on edges, and 12" o.c. for sidelaps
- Sidelaps attached using #10 TEK screws at 12" o.c.
Confirm the profile, gauge, span, loads and connections against your project drawings and the applicable product load tables before ordering.
Applications
Lightweight Concrete Systems
For composite slabs in LWIC systems, perforations let moisture escape while the concrete cures, which improves bonding. Condensation stays from getting trapped, structural integrity improves, and the insulated concrete system lasts.
Moisture-Controlled Roof Assemblies
In lightweight insulated concrete (LWIC) applications, the perforated profile improves adhesion and curing. Moisture can release as the concrete cures, which protects long-term insulation performance and prevents structural degradation in humid environments.
Standards and product documentation
Miami projects specifying the 1.5" B Vented deck get a product that complies with SDI (Steel Deck Institute) specifications, which sets high standards for design and performance.
1.5" Type B Vented Roof Deck questions
What do the perforations do on vented Type B deck?
Airflow and moisture control improve, condensation is kept from building up, and adhesion gets better in lightweight concrete applications.
In what way does vented Type B deck improve composite systems?
The bond between deck and concrete is enhanced by the small perforations, giving stronger composite action. Moisture can also escape, so there is less risk of trapped water.
Does vented Type B deck work for all Miami roofing applications?
Yes. It offers the most benefit in moisture-sensitive environments like vented roofing systems, where air circulation helps keep insulation from degrading and corroding.
What finishes can I order on vented Type B deck?
Choose galvanized (G60/G90) for corrosion resistance or prime-painted finishes for protection and compatibility with additional coatings.
Is structural strength affected by the vented Type B deck perforations?
No. Perforations are placed strategically, so load capacity is maintained while ventilation benefits apply to specific applications.
1.5" Composite Floor Deck
A strong-for-its-weight profile that bonds with concrete, the 1.5" composite floor deck improves slab efficiency for contractors for projects in Miami and elsewhere. Gauges range from 22 GA to 16 GA, finishes include G60 and G90 galvanized, and the product meets SDI and ANSI standards.
Dimensions and profile
| Property | Dimension |
|---|---|
| Profile Depth | 1.5 inches |
| Coverage Width | 36 inches |
| Rib Spacing | 6 inches (center to center) |
| Material Width | 39 inches |
Rib depth is 1.5 inches and coverage width is 36 inches. With 6 inch rib spacing (center to center) and a 39 inch material width, the sheets lap securely and develop strong composite action with poured slabs.
Gauges and thicknesses
| Gauge | Bare steel thickness (in) | Weight (lbs/sq ft) | Typical applications |
|---|---|---|---|
| 22 | 0.0295 | 1.6 | Light-duty spans. |
| 20 | 0.0358 | 2 | Medium spans. |
| 18 | 0.0474 | 2.6 | Heavy-duty applications. |
| 16 | 0.0598 | 3 | Heavy load spans. |
Gauge options for the 1.5" composite floor deck are 22, 20, 18, and 16, so you can match the deck to the load and span. Use 22 and 20 gauge where weight and cost matter most. Use 18 and 16 gauge for heavier loading.
Finishes and coatings
| Finish | Details |
|---|---|
| Galvanized G60 | Zinc coating of 0.6 oz/ft². Recommended for general environments. |
| Galvanized G90 | Zinc coating of 0.9 oz/ft². Ideal for highly corrosive environments. |
| Prime-Painted | Provides a base coat for additional protection or paint adhesion. |
| Bare Steel | Unfinished; typically for indoor use or controlled environments. |
Finishes for the 1.5" composite floor deck include galvanized (G60 and G90) and prime-painted. Galvanized steel resists corrosion best. Prime paint is a protective base coat for projects that need extra coatings. G60 and G90 conform to ASTM A653.
Material and finish options
Our high-strength steel 1.5" composite floor deck comes galvanized to SDI/ANSI standards, painted for a cleaner appearance, or as bare steel for specialized uses. Whichever you pick, you get lasting durability and consistent performance.
Custom lengths
Deck lengths run from 6′-0″ for small jobs up to 40′-0″ for large spans. Cutting to your required length means a better fit in the field and less scrap. This applies to every Miami order.
1.5" Composite Floor Deck features
The 1.5" composite floor deck from our yard pairs reliable concrete bonding with fire-resistance compatibility and SDI-compliant performance, for both commercial and residential floors.
Load Capacity at Low Weight
Handles heavy loads without adding much weight, a good fit for composite floors.
Better Structural Efficiency
Works with the concrete as one composite system, gaining strength from the bond.
Galvanized or Prime-Painted Finish
G60/G90 galvanized or prime-painted finishes protect against corrosion and wear.
Fire-Rated Assembly Support
Compatible with fireproofing materials and fire ratings for safer commercial and residential projects.
Meets SDI Standards
Follows Steel Deck Institute (SDI) and ANSI guidelines for quality and code compliance.
Gauges for Every Span
Comes in 22, 20, 18, and 16 gauge, with minimal deflection in composite floor use.
Installation and connections
Installation practices
- Lay the deck perpendicular to the supports.
- Attach with 5/8" diameter puddle welds or #10 TEK screws at 6" on the edges.
- Secure the sidelaps using #10 TEK screws at 12" o.c.
Fasteners and attachments
- Puddle welds, 5/8" diameter
- Edge fastening with #10 TEK screws at 6" o.c.
- Sidelap fastening with #10 TEK screws at 12" o.c.
Confirm the profile, gauge, span, loads and connections against your project drawings and the applicable product load tables before ordering.
Applications
Composite Floor Systems
Acts as permanent formwork and bonds to the concrete slab, which lowers deflection and raises strength.
Mezzanine Flooring
A durable base for mezzanine floors in warehouses and commercial buildings that carries heavy loads and goes in quickly.
Standards and product documentation
Specifiers in Miami can count on the 1.5" composite floor deck to follow SDI (Steel Deck Institute) specifications and ANSI standards, which sets high design and performance standards.
1.5" Composite Floor Deck questions
What is the main purpose of the 1.5" composite floor deck?
It forms permanent formwork for concrete slabs and works with the concrete as a composite system, increasing strength and load-bearing capacity.
What gauge range is offered for jobs in Miami?
From 22 GA through 16 GA. Choose the thicker gauges for heavier loads and longer spans.
What finish choices do I have?
Galvanized (G60 or G90) offers superior corrosion resistance. Prime-painted and bare steel are also available.
Do you offer custom lengths?
Yes, from 6'-0" to 40'-0", cut to size so there is minimal waste.
What makes the 1.5" composite deck right for floors?
The embossed ribs lock mechanically into the concrete, creating a composite slab where deck and concrete share the load.
2" Composite Floor Deck
Contractors for projects in Miami choose the 2" composite floor deck for floor systems that need strong composite bonding with concrete. The 2 inch depth and 22 GA to 16 GA gauges make it a fit for heavier loads and longer spans.
Dimensions and profile
| Property | Dimension |
|---|---|
| Profile Depth | 2 inches |
| Coverage Width | 36 inches |
| Rib Spacing | 12 inches (center to center) |
| Rib Height | 2 inches |
The 2" composite floor deck has a 2 inch rib depth and a standard 36 inch coverage width. Ribs sit 12 inches apart (center to center), and the material width supports secure overlaps and strong concrete bonding. The profile is built for maximum load capacity and extended spans.
Gauges and thicknesses
| Gauge | Bare steel thickness (in) | Weight (lbs/sq ft) | Typical applications |
|---|---|---|---|
| 22 | 0.0295 | 1.6 | Light-duty roofing and small spans. |
| 20 | 0.0358 | 2 | Medium spans, roofing, and siding. |
| 18 | 0.0474 | 2.6 | Heavy-duty applications. |
| 16 | 0.0598 | 3 | Heavy load spans. |
Available in gauges 22 to 16, the 2" composite floor deck covers a wide spread of load and span needs. The thinner 22 and 20 gauges are light and economical, best for shorter spans and lighter loads. The thicker 18 and 16 gauges bring more structural strength for longer spans and heavier loads.
Finishes and coatings
| Finish | Details |
|---|---|
| Galvanized G60 | Zinc coating of 0.6 oz/ft². Recommended for general environments. |
| Galvanized G90 | Zinc coating of 0.9 oz/ft². Ideal for highly corrosive environments. |
| Prime-Painted | Provides a base coat for additional protection or paint adhesion. |
| Bare Steel | Unfinished; typically for indoor use or controlled environments. |
The 2" composite floor deck comes with multiple finishes, among them galvanized (G60 and G90) and prime-painted, for long-term durability. Galvanized finishes offer superior corrosion resistance, while the prime-painted option is a protective base for jobs that will receive paint or coatings.
Material and finish options
The 2" composite floor deck is made from high-performance 50 KSI steel. Pick galvanized finishes that meet SDI/ANSI standards, painted finishes for a better look, or bare steel for specialized applications, and expect durable performance in varied construction settings.
Custom lengths
Lengths start at 6′-0″ for smaller projects and extend to 40′-0″ for larger structures. Deck is cut to the lengths you specify, so it fits properly and generates little waste. This applies to every Miami order.
2" Composite Floor Deck features
The 2" composite floor deck delivers high load-bearing capacity, structural efficiency, and reliable concrete bonding. It is an efficient, sustainable option for heavy-duty floor construction.
Strong Load Capacity
Made for heavier loads, ideal in industrial floors and demanding applications.
Composite Efficiency
Works with concrete as a composite, giving superior strength and a thinner floor.
Galvanized or Prime-Painted Finish
Choose G60/G90 galvanized or prime-painted for durability and corrosion resistance.
Saves Concrete
Reduces concrete use and lowers material cost without losing strength.
SDI Compliance
Meets Steel Deck Institute (SDI) and ANSI guidelines, ensuring quality and code compliance.
Optimized for Long Spans
Spans greater distances with minimal deflection.
Installation and connections
Installation practices
- Install the deck perpendicular to the supports.
- Attach at every support with puddle welds or TEK screws.
- Overlap sidelaps and fasten with screws at 12" o.c.
Fasteners and attachments
- 5/8" diameter puddle welds
- Fasten the edges with #10 TEK screws at 6" o.c.
- Attach sidelaps with #10 TEK screws at 12" o.c.
Confirm the profile, gauge, span, loads and connections against your project drawings and the applicable product load tables before ordering.
Applications
Composite Floor Systems
Bonds with concrete slabs to lower deflection and add strength in heavy-duty floors for multi-story commercial and residential construction.
Mezzanine Flooring
Offers a sturdy, quick-to-install base for warehouse and industrial mezzanine systems that carry heavy loads.
Standards and product documentation
For Miami projects, the 2" composite floor deck complies with SDI (Steel Deck Institute) specifications, ensuring high standards for design and performance.
2" Composite Floor Deck questions
What is the main use for the 2" composite floor deck?
It works as permanent formwork for concrete slabs and forms a composite system, which boosts structural strength and load-bearing capacity.
What gauge range is available for jobs in Miami?
Gauges run 22 GA to 16 GA, and the thicker gauges are better for heavier loads and longer spans.
What finishes are available?
Galvanized (G60 or G90) with superior corrosion resistance, prime-painted, and bare steel.
Does it come in custom lengths?
Yes. Deck can be cut from 6'-0" to 40'-0" with minimal waste.
Why is it suited to demanding applications?
The 2 inch depth is deeper than shallower decks, so it supports greater spans and heavier loads.
3" Composite Floor Deck
If your floor system needs longer spans and more load capacity, the 3" composite floor deck delivers. A 3 inch depth and 22 GA to 16 GA gauges provide superior strength and durability for Miami work. It meets SDI and ANSI standards, and G60 and G90 galvanized finishes add corrosion resistance.
Dimensions and profile
| Property | Dimension |
|---|---|
| Profile Depth | 3 inches |
| Coverage Width | 36 inches |
| Rib Spacing | 12 inches (center to center) |
| Rib Height | 3 inches |
Designed for strong, heavy-duty composite floors, the 3" composite floor deck has a 3 inch rib depth and a standard 36 inch coverage width. Ribs are spaced 12 inches (center to center) and the overall material width is 36 inches, so overlaps are efficient and concrete bonds well. Its maximum load capacity and extended spans fit demanding construction.
Gauges and thicknesses
| Gauge | Bare steel thickness (in) | Weight (lbs/sq ft) | Typical applications |
|---|---|---|---|
| 22 | 0.0295 | 1.6 | Light-duty roofing and small spans. |
| 20 | 0.0358 | 2 | Medium spans, roofing, and siding. |
| 18 | 0.0474 | 2.6 | Heavy-duty applications. |
| 16 | 0.0598 | 3 | Heavy load spans. |
The 3" composite floor deck is available in gauges 22 to 16, giving options for varied load and span requirements. Choose lightweight, economical 22 and 20 gauge for shorter spans and lighter loads. Choose 18 and 16 gauge when longer spans and heavier loads call for more structural strength and reliability in demanding use.
Finishes and coatings
| Finish | Details |
|---|---|
| Galvanized G60 | Zinc coating of 0.6 oz/ft². Recommended for general environments. |
| Galvanized G90 | Zinc coating of 0.9 oz/ft². Ideal for highly corrosive environments. |
| Prime-Painted | Provides a base coat for additional protection or paint adhesion. |
| Bare Steel | Unfinished; typically for indoor use or controlled environments. |
For long-term performance, the 3" composite floor deck is offered in galvanized (G60 and G90) and prime-painted finishes. Galvanized finishes provide superior corrosion resistance, and G90 has a higher zinc coating for locations with more exposure to moisture or chemicals. The prime-painted option is a protective base coat, a good fit when paint or coatings will be applied.
Material and finish options
Made from high-performance 50 KSI steel, the 3" composite floor deck can be galvanized to SDI/ANSI standards, painted for enhanced aesthetics, or left bare for specialized applications. In all cases it is built for durable, reliable performance in diverse construction settings.
Custom lengths
Custom lengths start at 6′-0″ for small projects and reach 40′-0″ for larger structures. Cutting deck to your needs means a good fit and little material wasted. Contractors in Miami can specify exact cut lengths.
3" Composite Floor Deck features
With our 3" composite floor deck you get exceptional strength, extended spans, and dependable concrete bonding, a good match for heavy-duty, efficient, and sustainable floors.
Exceptional Load Strength
Handles heavy loads, so it works well in industrial applications and tough construction conditions.
Composite Efficiency
Works in harmony with concrete as a composite, which thins the floor while maximizing strength.
Galvanized or Prime-Painted Finish
G60/G90 galvanized or prime-painted finishes improve durability and corrosion resistance.
Fire-Rating Compatible
Supports fireproofing materials and fire ratings, adding safety to commercial and residential projects.
SDI and ANSI Compliant
Meets Steel Deck Institute (SDI) and ANSI guidelines to ensure quality and code compliance.
Extended Spans
A 3 inch profile spans longer distances and reduces additional supports on big projects.
Installation and connections
Installation practices
- Lay the deck perpendicular to the supports.
- Use puddle welds or TEK screws to fasten the deck at each support.
- Lap the sidelaps and secure with screws at 12" o.c.
Fasteners and attachments
- Puddle welds, 5/8" diameter
- #10 TEK screws at 6" o.c. on edges, 12" o.c. on sidelaps
- Sidelap fastening with #10 TEK screws at 12" o.c.
Confirm the profile, gauge, span, loads and connections against your project drawings and the applicable product load tables before ordering.
Applications
Long-Span Composite Floors
Built for long spans, the 3" Composite Floor Deck cuts the number of columns required. It improves structural efficiency and supports heavy loads in warehouses, distribution centers, and large commercial spaces.
Heavy Equipment Platforms
Heavy machinery sits on durable platforms made with the 3" Composite Floor Deck, which manages concentrated loads and improves load distribution in industrial facilities and manufacturing plants.
Standards and product documentation
Specifiers in Miami can count on the 3" composite floor deck to follow SDI (Steel Deck Institute) specifications, which sets high design and performance standards.
3" Composite Floor Deck questions
What is the primary purpose of the 3" composite floor deck?
The 3" Composite Floor Deck is permanent formwork that structurally supports concrete slabs and forms a composite system well suited to long spans and heavy loads.
What gauges are available for the 3" composite floor deck for jobs in Miami?
22 GA to 16 GA, which gives flexibility across load capacities and structural requirements.
What finishes can I order for the 3" composite floor deck?
Galvanized (G60 or G90) finishes resist corrosion, prime-painted suits projects needing more coatings, and bare steel is for specific applications.
Is custom length cutting offered for the 3" composite floor deck?
Yes, from 6'-0" to 40'-0", for a precise fit and less material waste on site.
What makes the 3" composite floor deck right for large-scale projects?
The deeper 3 inch profile carries longer spans and heavier loads, which is why it is preferred in industrial facilities, warehouses, and multi-story construction requiring maximum durability.
9/16" Type S Form Deck
Slab construction in floors and roofs relies on Type S Form Deck as permanent formwork, thanks to its strength and straightforward installation. Gauges run from 28 GA to 20 GA, and manufacturing meets SDI and ANSI standards. It is a regular choice for Miami concrete work.
Dimensions and profile
| Property | Dimension |
|---|---|
| Profile Depth | 9/16 inches |
| Coverage Width | 36 inches |
| Rib Spacing | 2.57 inches (center to center) |
| Rib Height | 9/16 inches |
Type S Form Deck has a shallow 9/16-inch rib depth and a standard coverage width of 36 inches, which suits fast concrete slab forming. With ribs spaced 2.57 inches (center to center), it gives a stable forming surface that holds concrete volume down without giving up structural integrity.
Gauges and thicknesses
| Gauge | Bare steel thickness (in) | Weight (lbs/sq ft) | Typical applications |
|---|---|---|---|
| 28 | 0.0149 | 0.65 | Light-duty concrete formwork, low-load applications. |
| 26 | 0.0179 | 0.75 | Standard concrete slabs. |
| 24 | 0.0239 | 1.0 | Medium-duty floor and roof slabs. |
| 22 | 0.0299 | 1.25 | Medium-duty floors, multi-level buildings. |
| 20 | 0.0358 | 1.5 | Heavy-duty formwork, bridges. |
Type S Form Deck comes in gauges 28, 26, 24, 22, and 20. Gauges 28 and 26, the lighter ones, are economical for standard concrete slabs. Gauges 22 and 20 deliver greater strength for longer spans and heavier concrete loads, as in bridges and industrial floors.
Finishes and coatings
| Finish | Details |
|---|---|
| Galvanized G60 | Zinc coating of 0.6 oz/ft². Recommended for general environments. |
| Galvanized G90 | Zinc coating of 0.9 oz/ft². Ideal for highly corrosive environments. |
| Prime-Painted | Provides a base coat for additional protection or paint adhesion. |
| Bare Steel | Unfinished; typically for indoor use or controlled environments. |
Galvanized (G60 and G90) and prime-painted finishes are available on Type S Form Deck. Corrosion resistance comes from the galvanized coating, with G90 providing more protection in highly corrosive environments. G60 and G90 finishes conform to ASTM A653.
Material and finish options
Our Type S Form Deck is made from high-strength 80 KSI steel. Choose a corrosion-resistant galvanized finish that meets SDI/ANSI standards, one of several painted finishes for a tailored look, or bare steel for custom applications. Every finish is meant to improve durability and keep performance steady in demanding environments.
Custom lengths
Deck lengths start at 6′-0″ for smaller jobs and run up to 40′-0″ for large builds. We cut to the length you specify for projects in Miami and elsewhere, so the deck fits properly and leftover material stays low.
9/16" Type S Form Deck features
Looking for a form deck with strong structure, efficient concrete forming, and corrosion-resistant finishes? Type S Form Deck is a cost-effective, versatile option for multi-level buildings, bridges, and tunnel work.
High Structural Strength
Designed to support concrete slabs, giving stability and structural strength during and after concrete placement.
Efficient Concrete Formwork
This quick-to-build form deck suits slab forming in multi-level buildings, bridges, and tunnels, and it reduces labor time and material costs.
Galvanized or Prime-Painted Finish
G60/G90 galvanized or prime-painted finishes add durability and corrosion resistance where conditions are demanding.
Cost-Effective Solution
A lightweight, shallow profile limits concrete use while offering a stable forming surface, so overall project costs drop.
Compliance with SDI Standards
Conforms to Steel Deck Institute (SDI) and ANSI guidelines, supporting quality and code compliance.
Versatile Design Options
Gauges 28 through 20, G60/G90 galvanized coatings, and custom lengths between 6 and 40 feet.
Installation and connections
Installation practices
- Lay the deck perpendicular to the supports.
- At each support, fasten with pins, powder-actuated fasteners, or TEK screws.
- Lap the sidelaps and secure them with screws at 12" o.c.
Fasteners and attachments
- Pins or powder-actuated fasteners attach the deck to supports
- #10 TEK screws at 6" o.c. along edges and 12" o.c. at sidelaps
- Sidelaps joined with button punching or #10 TEK screws at 12" o.c.
Confirm the profile, gauge, span, loads and connections against your project drawings and the applicable product load tables before ordering.
Applications
Composite Floor Slabs
Slab forming in multi-level buildings, bridges, and tunnels is an ideal fit. The shallow rib profile cuts concrete volume and provides an efficient, stable forming surface.
Bridge and Tunnel Formwork
Type S Form Deck sees wide use as permanent concrete formwork in bridge decks and tunnels, where it supports the structure during concrete placement.
Standards and product documentation
SDI (Steel Deck Institute) specifications and ANSI standards govern Type S Form Deck, supporting high standards of design and performance.
9/16" Type S Form Deck questions
Why use Type S form deck?
Type S form deck acts as permanent formwork for concrete slabs in floor and roof systems. It gives a stable base while concrete is placed and stays put after curing.
Is form deck the same as composite deck?
No. Form deck serves only as formwork, so the cured concrete slab carries the load independently. Composite deck bonds structurally with the concrete and shares load permanently.
What are the Type S form deck gauge options?
28, 26, 24, 22, and 20 GA, with thickness from 0.0149" to 0.0358".
Which fastening methods work for Type S form deck?
Pins, powder-actuated fasteners, or TEK screws attach the deck. Button punching or #10 TEK screws at 12" o.c. secure the sidelaps.
Does Type S form deck come in custom lengths?
Yes, in lengths from 6'-0" to 40'-0". That reduces waste and fits each project precisely, including work in Miami.
1" Type HD Form Deck
Heavy-duty concrete formwork in floors and roofs is the purpose of Type HD Form Deck, which delivers strong support and durability. Gauges run from 26 GA to 20 GA, so it copes with greater loads and longer spans. SDI and ANSI standards apply, and galvanized finishes such as G60 and G90 improve corrosion resistance for Miami projects.
Dimensions and profile
| Property | Dimension |
|---|---|
| Profile Depth | 1 inch |
| Coverage Width | 36 inches |
| Rib Spacing | 4 inches (center to center) |
| Rib Height | 1 inch |
Type HD Form Deck measures 1 inch in rib depth with a standard 36-inch coverage width, a good match for heavy-duty concrete formwork in floors and roofs. Ribs are 4 inches apart (center to center), and a 39-inch overall material width means secure overlaps and excellent concrete support. The profile is built for greater loads at reduced material cost, offering strength and durability on demanding construction projects.
Gauges and thicknesses
| Gauge | Bare steel thickness (in) | Weight (lbs/sq ft) | Typical applications |
|---|---|---|---|
| 26 | 0.0179 | 0.75 | Light-duty concrete formwork, low-load floors. |
| 24 | 0.0239 | 1.0 | Standard floors, light industrial applications. |
| 22 | 0.0299 | 1.25 | Medium-duty floors, parking structures. |
| 20 | 0.0359 | 1.5 | Heavy-duty formwork, bridges, industrial slabs. |
Type HD Form Deck comes in gauges 26, 24, 22, and 20. Gauges 26 and 24 are the lighter, cost-effective choices for standard concrete slabs and moderate spans. For longer spans and heavier concrete loads, such as industrial floors, bridges, and parking structures, gauges 22 and 20 give superior strength and support.
Finishes and coatings
| Finish | Details |
|---|---|
| Galvanized G60 | Zinc coating of 0.6 oz/ft². Recommended for general environments. |
| Galvanized G90 | Zinc coating of 0.9 oz/ft². Ideal for highly corrosive environments. |
| Prime-Painted | Provides a base coat for additional protection or paint adhesion. |
| Bare Steel | Unfinished; typically for indoor use or controlled environments. |
For durability and long-term performance, Type HD Form Deck is supplied in galvanized (G60 and G90) and prime-painted finishes. Galvanizing gives excellent corrosion resistance, and G90 has a thicker zinc layer to protect in high-moisture or chemical environments. The prime-painted finish adds a protective base coat. G60 and G90 finishes conform to ASTM A653 specifications.
Material and finish options
High-strength 80 KSI steel is the base of Type HD Deck. A corrosion-resistant galvanized finish meeting SDI/ANSI standards is available, along with a variety of painted finishes for tailored aesthetics and bare steel for custom applications. Each is designed to improve durability and maintain performance in demanding environments.
Custom lengths
Whether the job is small and needs 6′-0″ lengths or large and needs spans up to 40′-0″, we can supply it. The custom length service follows your requirements, so the deck fits well and little is wasted. Contractors in Miami can order to the foot.
1" Type HD Form Deck features
The 1" Type HD Form Deck brings heavy-duty load support, efficient concrete bonding, and enhanced durability to your projects. Industrial floors, bridge formwork, and other demanding structural applications are where it excels.
Heavy-Duty Load Support
Higher concrete loads are what Type HD Form Deck is engineered for, making it ideal when superior strength and stability matter.
Efficient Concrete Bonding
The deep profile carries thicker concrete slabs, which spreads load better and supports long-term performance.
Galvanized or Prime-Painted Finish
G60/G90 galvanized or prime-painted finishes are available for durability and corrosion resistance.
Cost-Effective Formwork Solution
A fit for heavy-duty work such as parking structures, bridge formwork, and industrial floors, and it adapts easily to complex construction needs.
Compliance with SDI Standards
It meets Steel Deck Institute (SDI) and ANSI guidelines, so quality and code compliance are assured.
Versatile Gauge Options
Gauges 26 GA to 20 GA let you meet specific load requirements without losing durability.
Installation and connections
Installation practices
- Lay the deck perpendicular to the supports.
- Fasten at each support with pins, powder-actuated fasteners, or TEK screws.
- Overlap the sidelaps and secure them with screws at 12" o.c.
Fasteners and attachments
- Pins or powder-actuated fasteners secure the deck to the supports
- #10 TEK screws at 6" o.c. on edges and 12" o.c. for sidelaps
- Sidelaps attached through button punching or #10 TEK screws at 12" o.c.
Confirm the profile, gauge, span, loads and connections against your project drawings and the applicable product load tables before ordering.
Applications
Heavy Industrial Floor Systems
High-load equipment and machinery on heavy industrial floors get strong support from Type HD Form Deck. The durable design performs over the long term in demanding industrial settings.
Bridge and Highway Formwork
Bridge and highway construction commonly uses Type HD Form Deck as permanent formwork, where it supports heavy concrete loads during placement and adds lasting strength.
Standards and product documentation
Specifications from the SDI (Steel Deck Institute) apply to Type HD Form Deck, supporting high standards of design and performance.
1" Type HD Form Deck questions
What is Type HD Form Deck mainly used for?
Mostly as permanent formwork for heavy-duty concrete slabs in industrial floors, bridges, and infrastructure projects. It holds wet concrete during placement and stays in place after curing.
Which gauges does Type HD Form Deck come in?
26 GA, 24 GA, 22 GA, and 20 GA, which cover a range of load capacities and project requirements.
Is temporary shoring needed with Type HD Form Deck?
It can be. Temporary shoring may be required during installation to carry the weight of the deck and wet concrete until the slab has fully cured.
How is Type HD Form Deck usually fastened?
With pins, powder-actuated fasteners, or TEK screws. Sidelaps are secured by button punching or screws at 12" o.c.
Is Type HD Form Deck available in custom lengths in Miami?
Yes, from 6'-0" to 40'-0". That keeps material waste low and gives each project a precise fit.
Type BI Inverted Form Deck
Architectural ceilings with an exposed soffit are what Type B Inverted Form Deck is designed for. It works as permanent formwork for concrete slabs in floors and roofs, in gauges 22 GA through 16 GA, and is a natural fit for Miami commercial and institutional buildings.
Dimensions and profile
| Property | Dimension |
|---|---|
| Profile Depth | 1.5 inches |
| Coverage Width | 36 inches |
| Rib Spacing | 6 inches (center to center) |
| Rib Height | 1.5 inches |
Rib depth on Type BI Inverted Form Deck is 1.5 inches, and standard coverage width is 36 inches. The ribs point up when installed, which leaves a smooth flat soffit below that serves as an architectural ceiling without further finishes. A 6-inch rib spacing (center to center) maintains structural integrity and allows for concrete placement.
Gauges and thicknesses
| Gauge | Bare steel thickness (in) | Weight (lbs/sq ft) | Typical applications |
|---|---|---|---|
| 22 | 0.0299 | 1.25 | Light-duty floors and ceilings. |
| 20 | 0.0358 | 1.5 | Standard commercial floor systems. |
| 18 | 0.0474 | 2.6 | Heavy-duty applications, parking structures. |
| 16 | 0.0598 | 3.0 | Heavy load industrial floors. |
The gauge lineup for Type BI Inverted Form Deck is 22, 20, 18, and 16. Standard commercial applications suit the lighter gauges (22 and 20). When you need more strength for parking structures or heavy industrial floor systems, use gauges 18 and 16.
Finishes and coatings
| Finish | Details |
|---|---|
| Galvanized G60 | Zinc coating of 0.6 oz/ft². Recommended for general environments. |
| Galvanized G90 | Zinc coating of 0.9 oz/ft². Ideal for highly corrosive environments. |
| Prime-Painted | Provides a base coat for additional protection or paint adhesion. |
| Bare Steel | Unfinished; typically for indoor use or controlled environments. |
Type BI Inverted Form Deck is offered with galvanized (G60 and G90) and prime-painted finishes. The galvanized coatings protect against corrosion, with G90 extending that protection to highly corrosive environments. G60 and G90 finishes conform to ASTM A653 specifications.
Material and finish options
Type BI Inverted Form Deck is high-strength steel and can be ordered with a corrosion-resistant galvanized finish that meets ANSI/SDI standards, in a range of painted finishes for tailored aesthetics, or as bare steel for custom applications. Each finish is meant to improve durability and keep performance consistent.
Custom lengths
Need 6′-0″ lengths for a small project or spans up to 40′-0″ for a large one? We handle both. Our custom length service is built around your requirements for Miami and beyond, so the deck fits optimally and waste stays minimal.
Type BI Inverted Form Deck features
Type BI Inverted Form Deck offers high structural strength, efficient formwork, and corrosion-resistant finishes. It fits architectural ceilings, multi-level parking structures, and commercial floor systems that need exposed soffits.
High Structural Strength
Supports concrete and live loads while presenting an architecturally finished ceiling surface from below.
Efficient Formwork
Permanent formwork for concrete slabs means less labor and shorter construction time, since there are no temporary forms to strip.
Corrosion Resistance
Durable corrosion resistance in commercial settings comes from G60/G90 galvanized or prime-painted finishes.
Cost-Effective
Formwork and structural support in a single product trim material and labor costs on exposed ceiling work.
Compliance with Standards
Built to SDI and ANSI guidelines, giving quality and code compliance in every application.
Versatile Options
Several gauges (22–16 GA) and finishes address varied load requirements and architectural specifications.
Installation and connections
Installation practices
- Install the deck with ribs facing up, perpendicular to the supports.
- Fasten at every support with pins, powder-actuated fasteners, or TEK screws.
- Overlap sidelaps and fasten with button punching or screws at 12" o.c.
Fasteners and attachments
- Deck is secured to supports with pins or powder-actuated fasteners
- #10 TEK screws at 6" o.c. on edges
- Sidelaps are attached with button punching or #10 TEK screws at 12" o.c.
Confirm the profile, gauge, span, loads and connections against your project drawings and the applicable product load tables before ordering.
Applications
Industrial Flooring with Exposed Ceiling
Industrial floor systems get strong support, and the soffit below is architecturally finished and exposed. It is a good match for schools, offices, and civic buildings.
Multi-Level Parking Structures
Parking garage construction commonly uses it. It supplies permanent formwork and leaves a clean exposed underside, which reduces finishing costs.
Standards and product documentation
Type BI Inverted Form Deck complies with SDI (Steel Deck Institute) specifications and ANSI standards, which keeps design and performance standards high for projects in Miami.
Type BI Inverted Form Deck questions
What is Type BI inverted form deck used for?
Architectural ceiling systems, multi-level parking structures, schools, offices, and any facility where an attractive exposed soffit is wanted.
How does installing Type BI differ from standard form deck?
Type BI is laid inverted with the ribs up. That leaves the flat side exposed below as a finished ceiling, with no extra finishing materials.
Which gauges does Type BI come in?
22, 20, 18, and 16 GA, giving options for different structural requirements.
What finishes does Type BI come with?
G60 and G90 galvanized finishes resist corrosion, and prime-painted finishes provide extra protection.
Can I get Type BI cut to length in Miami?
Yes, custom lengths from 6'-0" to 40'-0" are available, ensuring a precise fit and minimal waste.
Before you order
Order Steel Deck for your Miami project
Share your drawings or a material list and our team will check quantities, profiles and cut lengths. We also prepare takeoffs and shop drawings, then send pricing and delivery options for the Miami job site.
Start your quoteWhat to include in your quote request
- Your Miami project address and when you need material on site.
- Drawings or a material list with quantities and cut lengths.
- Specified profile, dimensions, gauge and finish.
- Connection details, load tables and any supporting documentation.
How We Work
We Guide You Through the Process
From manufacturing to delivery, we ensure precision, efficiency, and compliance with industry standards.
Takeoff and Shop Drawings Services
We provide specialized takeoff services for accurate quotations and detailed shop drawings to produce optimized cutting lists for sheets, ensuring efficient execution and waste-free outcomes in your projects.
Manufacture
We manufacture metal decks to SDI and ANSI standards, ensuring strength, durability, and compliance. We provide custom lengths and high-precision fabrication for optimized performance in roof, floor, and form deck applications.
Swift Deliveries & Nationwide Reach
While based in South Florida, we serve clients nationwide, ensuring quality, efficiency, and timely deliveries across the U.S., reflecting our commitment to excellence without boundaries.
Frequently Asked Questions
Where can I get steel deck in Miami?
Miami Metal Deck delivers to Miami with same-day pickup in Miami Gardens and 1-day delivery to most Florida cities. Call 305-760-2575.
Do you provide shop drawings?
Yes. We offer complete takeoff services, shop drawings, and optimized cutting lists for all steel deck orders.
What steel deck products does Miami Metal Deck sell?
Roof deck (Type B, Vented Type B, Type N), composite floor deck in several profiles, and form deck (Type S, HD, BI). Each is offered in various gauges and galvanized finishes.
Roof deck, composite deck, form deck: how do they differ?
Roof deck is built to support insulation and roofing systems. Composite deck bonds with poured concrete to make a load-bearing floor slab. Form deck is concrete formwork, temporary or permanent.
Which gauges and finishes are available?
Depending on the product type, we stock gauges 16 to 28. Galvanized finishes come in G60 and G90, and custom lengths run from 6 to 40 feet.
Do you help with takeoffs and shop drawings?
We do. Our engineering team offers specialized takeoff services, detailed shop drawings, and optimized cutting lists for accurate quotations and efficient project execution in Miami and elsewhere.
What standards do the products follow?
Steel deck products comply with ANSI/SDI standards (RD-2017 for roof deck, C-2017 for composite floor deck, NC-2017 for non-composite form deck), and we are a Steel Deck Institute member.