SDI Member · ANSI/SDI compliant
Steel Deck Supplier in Sarasota
High-performance steel deck in Sarasota for durable, efficient structures. Roof deck, composite floor deck, and form deck.
Local Steel Deck supply for Sarasota
For job sites in Sarasota, Miami Metal Deck provides Steel Deck cut to length and ready for installation, serving Sarasota County and the Southwest Florida region. Deliveries to Sarasota leave our Miami Gardens facility on a schedule set with your team, with 1-day service available to major Florida cities.
With Sarasota's coastal humidity and salt air, many engineers specify a G90 galvanized finish for its heavier zinc coating; we confirm the finish against your project specifications. We supply to the gauges, lengths and finishes on your approved drawings, which are designed to the Florida Building Code requirements that apply in Sarasota County.
Product guide
Product specifications for your Sarasota project
Compare profiles, dimensions, material options and applications to prepare your order. Select a product below to explore its technical details.
1.5" Type B Roof Deck
A dependable roofing choice, the 1.5 Type B metal deck is supplied from Miami, Florida and installs without fuss. Structural strength is excellent, gauges run from 22 GA to 16 GA, and the deck meets SDI and ANSI standards. Galvanized finishes such as G60 and G90 add corrosion resistance and durability, which helps contractors in Sarasota match the deck to the job.
Dimensions and profile
| Property | Dimension |
|---|---|
| Profile Depth | 1.5 inches |
| Coverage Width | 36 inches |
| Rib Spacing | 6 inches (center to center) |
| Rib Height | 1.5 inches |
This 1.5" Type B metal deck has a 1.5 inch rib depth and a standard coverage width of 36 inches, which makes it structurally efficient for roofing and flooring. Ribs sit 6 inches apart (center to center), and the 39 inch overall material width gives secure overlaps and strong composite action with concrete slabs. The profile maximizes strength at minimal weight, so it works across many kinds of construction.
Gauges and thicknesses
| Gauge | Bare steel thickness (in) | Weight (lbs/sq ft) | Typical applications |
|---|---|---|---|
| 22 | 0.0295 | 1.6 | Light-duty roofing and small spans. |
| 20 | 0.0358 | 2 | Medium spans, roofing, and siding. |
| 18 | 0.0474 | 2.6 | Heavy-duty applications. |
| 16 | 0.0598 | 3 | Heavy load spans. |
There are four gauges to choose from for Type B deck: 22, 20, 18, and 16. Each has different thickness and load capacity, so you can fit the deck to the project. Light and cost-effective, 22 and 20 gauge are best on shorter spans and lighter loads. Stronger 18 and 16 gauge carry longer spans and heavier loads, which makes them ideal for demanding applications.
Finishes and coatings
| Finish | Details |
|---|---|
| Galvanized G60 | Zinc coating of 0.6 oz/ft². Recommended for general environments. |
| Galvanized G90 | Zinc coating of 0.9 oz/ft². Ideal for highly corrosive environments. |
| Prime-Painted | Provides a base coat for additional protection or paint adhesion. |
| Bare Steel | Unfinished; typically for indoor use or controlled environments. |
For lasting performance, Type B deck is offered with galvanized (G60 and G90) and prime-painted finishes, among others. Galvanizing gives excellent corrosion resistance, and G90 has the higher zinc coating for environments with more exposure to moisture or chemicals. If the project needs extra paint or coating layers, the prime-painted option supplies a protective base coat.
Material and finish options
Steel is offered in 33 KSI, 40 KSI, 50 KSI, and 80 KSI grades, each engineered for a particular structural demand and balancing strength against flexibility. Both galvanized (G60/G90) and prime-painted finishes conform to ASTM A653 for corrosion resistance.
Custom lengths
From 6′-0″ pieces on smaller projects to spans of 40′-0″ on larger ones, we handle every dimension with precision and efficiency. Our custom length service is built around your specifications, so the deck fits well and little material is wasted on Sarasota jobs.
1.5" Type B Roof Deck features
Our 1.5" Type B metal deck combines light weight with durability, fire resistance, and a sustainable design. It suits efficient short-span commercial work and eco-conscious building programs.
High Strength-to-Weight Ratio
Carries heavy loads while keeping weight down, which makes it a good match for roofing systems.
Standard 36 inches Coverage
The 36-inch coverage and consistent rib pattern cut installation time and raise jobsite efficiency.
Galvanized or Prime-Painted Finish
Pick G60/G90 galvanized or a prime-painted finish for better durability and corrosion resistance.
Compatibility with Roofing Systems
Works with roofing assemblies that include insulation, waterproofing, reflective coatings, drainage, ventilation, and related components.
Compliance with Standards
Follows Steel Deck Institute (SDI) and ANSI guidelines, so quality and code compliance are built in.
Wide Gauge Range
Offered in 22, 20, 18, and 16 gauges so you can tailor the deck to the load requirements of your project.
Installation and connections
Installation practices
- Place the deck perpendicular to the supports.
- Secure the deck to each support using puddle welds or TEK screws.
- Overlap the sidelaps, then screw them down at 12" o.c.
Fasteners and attachments
- 5/8" Diameter Puddle Welds
- #10 TEK screws at 6" o.c. on edges, and 12" o.c. for sidelaps
- Sidelaps attached using #10 TEK screws at 12" o.c.
Confirm the profile, gauge, span, loads and connections against your project drawings and the applicable product load tables before ordering.
Applications
Roof Deck Applications
Where commercial and industrial roofs need strength and durability, Type B is a common pick. It supports roofing insulation systems and suits both vented and non-vented roofing.
Hybrid Structural-Ceiling Systems
In architectural spaces, Type B decking can double as an exposed ceiling. It supplies structural strength and a clean finish, and it reduces added materials and installation time.
Standards and product documentation
The 1.5" Type B deck meets SDI (Steel Deck Institute) specifications, which sets a high bar for design and performance on Sarasota projects.
1.5" Type B Roof Deck questions
Which gauge is typical for Type B decking?
20 gauge is generally the most common, as it balances cost and strength for typical applications. Other gauges may be needed depending on project-specific requirements.
G60 versus G90 galvanized: what is the difference?
G60 carries 0.60 oz/ft² of coating, and G90 carries 0.90 oz/ft². The extra 50% zinc in G90 gives greater corrosion resistance. Use G60 indoors or in low-moisture environments. Use G90 outdoors, on roofing and steel decking, and on structures exposed to weather, humidity, or corrosive conditions.
What maximum spans can the 1.5" Type B deck achieve?
Maximum spans vary with gauge, span type, and load requirements. 22-gauge decks, for example, can span up to 8 feet under multiple spans, while 16-gauge decks can span up to 14 feet. Always consult load tables for precise details.
Is customization available for 1.5" Type B metal decking on Sarasota jobs?
Yes. Gauge, finish, and length can be customized. Cutting lengths to project needs reduces waste and optimizes installation efficiency.
Does 1.5" Type B metal decking satisfy industry standards?
Yes. Steel Deck Institute (SDI) standards and American Iron and Steel Institute (AISI) design guidelines are both met, which ensures quality, safety, and compatibility with construction codes.
3" Type N Roof Deck
Roof applications often call for 3" Type N metal deck, thanks to its long-span capability and structural strength. A 3 inch deep profile and gauges from 22 GA to 16 GA let it flex across roofing projects in Sarasota. It complies with SDI and ANSI standards, with galvanized finishes like G60 and G90 available.
Dimensions and profile
| Property | Dimension |
|---|---|
| Profile Depth | 3 inches |
| Coverage Width | 24 inches |
| Rib Spacing | 8 inches (center to center) |
| Rib Height | 3 inches |
Depth of profile is 3 inches and coverage width is 24 inches on the Type N Roof Deck. Rib spacing measures 8 inches (center to center), and rib height is 3 inches. A deep rib like this gives the strength needed for longer spans and heavy roofing loads, and the wide coverage makes large roofs quicker to cover.
Gauges and thicknesses
| Gauge | Bare steel thickness (in) | Weight (lbs/sq ft) | Typical applications |
|---|---|---|---|
| 22 | 0.0295 | 1.8 | Light duty roofs. |
| 20 | 0.0358 | 2.2 | Standard commercial roofs. |
| 18 | 0.0474 | 2.9 | Heavy load areas. |
| 16 | 0.0598 | 3.7 | Long spans, high loads. |
Choose from 22, 20, 18, and 16 gauge when ordering Type N Roof Deck. Thickness and load capacity differ by gauge, so you can fit the deck to the roofing project. For shorter spans and lighter loads, lighter gauges (22 and 20) are economical. For long spans and heavy-duty roofing, heavier gauges (18 and 16) deliver extra strength and durability.
Finishes and coatings
| Finish | Details |
|---|---|
| Galvanized G60 | Zinc coating of 0.6 oz/ft². Recommended for general environments. |
| Galvanized G90 | Zinc coating of 0.9 oz/ft². Ideal for highly corrosive environments. |
| Prime-Painted | Provides a base coat for additional protection or paint adhesion. |
| Bare Steel | Unfinished; typically for indoor use or controlled environments. |
Type N deck is available with several finishes for lasting performance, including galvanized (G60 and G90) and prime-painted. Galvanizing resists corrosion well, and G90 has a heavier zinc coating for environments with more moisture or chemical exposure. Prime paint adds a base coat, so it fits projects that call for extra paint or coatings.
Material and finish options
The Type N 3" Roof Deck is made from high-strength 80 KSI steel. Choose a corrosion-resistant galvanized finish that meets ANSI standards, prime-painted finishes for extra protection, or bare steel for specialized applications. Each finish is engineered for durability and dependable performance in demanding roofing environments.
Custom lengths
Deck lengths run from 6′-0″ on smaller roofing projects to 40′-0″ on large-scale construction, and the 3" Type N Roof Deck is supplied accurately and efficiently. Custom lengths for Sarasota jobs give an optimal fit, reduce waste, and streamline installation.
3" Type N Roof Deck features
Our 3" Type N roof deck delivers superior strength, fire-rated performance, and long-span efficiency. It is well suited to large commercial roofs and sustainable building applications.
Deep Rib Profile for High Strength
A 3-inch rib depth provides superior strength for longer spans and heavy roofing loads.
Wide Coverage Efficiency
Standard 24-inch coverage uses less material and makes installation simpler, a plus on large-scale projects.
Corrosion-Resistant Finish Options
G60 or G90 galvanized finishes stand up well to harsh environmental conditions.
Fire and Acoustic Performance
Satisfies fire-rating standards in approved assemblies, and supports insulation for soundproofing and thermal efficiency.
Compliance with SDI Standards
Steel Deck Institute (SDI) and ANSI guidelines are met, ensuring quality and code compliance.
Long Span Capability
Gauges of 22, 20, 18, and 16 let you customize the deck to specific load-bearing requirements and project demands.
Installation and connections
Installation practices
- Set the deck perpendicular to the supports.
- Secure the deck to each support using puddle welds or TEK screws.
- Overlap the sidelaps and screw them down at 12" o.c. (on center).
Fasteners and attachments
- 5/8" Diameter Puddle Welds
- #12 or #14 TEK screws at 6" o.c. on edges, and 12" o.c. for sidelaps
- Sidelaps attached using #12 TEK screws at 12" o.c.
Confirm the profile, gauge, span, loads and connections against your project drawings and the applicable product load tables before ordering.
Applications
Long-Span Roofing Systems
Where large commercial and industrial roofs need long spans and fewer supports, Type N is the right fit. The 3-inch rib profile provides exceptional strength and efficiency on expansive roof designs.
Fire-Rated Roof Assemblies
Type N is a common choice in fire-rated roof systems because it is compatible with insulation and fireproofing materials. Safety and performance are supported in demanding commercial and industrial applications.
Standards and product documentation
For Sarasota roofing projects, the 3" Type N deck complies with SDI (Steel Deck Institute) specifications, supporting high standards for design and performance.
3" Type N Roof Deck questions
What are the typical uses of 3" Type N Roof Deck?
Long-span roofing is its purpose. It provides structural support for commercial and industrial roof systems.
What spans can Type N Roof Deck handle?
Span depends on gauge, and Type N Deck can reach up to 16 feet, which reduces intermediate supports.
Which gauges are offered for the 3" Type N Roof Deck?
You can choose from 16 GA to 22 GA to meet different load and span requirements.
Is Type N Roof Deck compatible with fire-rated roofing systems in Sarasota?
Yes. It supports fire-rated assemblies and works with insulation and fireproofing materials for enhanced safety.
Which finishes can I get on Type N Roof Deck?
Galvanized (G60 or G90) for corrosion resistance, plus prime-painted options for extra protection.
1.5" Type B Vented Roof Deck
Designed for Lightweight Insulated Concrete (LWIC) applications, the 1.5" Type B Vented Deck improves bonding and load distribution. This vented Type B profile is 1.5 inches deep and comes in gauges from 22 GA to 18 GA, so it adapts to different projects in Sarasota. It complies with SDI and ANSI standards and is offered in galvanized finishes such as G60 and G90 for durability and corrosion resistance.
Dimensions and profile
| Property | Dimension |
|---|---|
| Profile Depth | 1.5 inches |
| Coverage Width | 36 inches |
| Rib Spacing | 6 inches (center to center) |
| Rib Height | 1.5 inches |
Ideal for Lightweight Insulated Concrete (LWIC) applications, the 1.5" Type B Vented Deck has a rib depth of 1.5 inches and a standard coverage width of 36 inches. A 6 inch rib spacing (center to center) and a 39 inch overall width provide secure overlaps and strong composite action with concrete slabs. Perforations in the profile improve adhesion and help LWIC cure correctly, maximizing strength, durability, and efficiency.
Gauges and thicknesses
| Gauge | Bare steel thickness (in) | Weight (lbs/sq ft) | Typical applications |
|---|---|---|---|
| 22 | 0.0295 | 1.6 | Light-duty roofing and small spans. |
| 20 | 0.0358 | 2 | Medium spans, roofing, and siding. |
| 18 | 0.0474 | 2.6 | Heavy-duty applications. |
| 16 | 0.0598 | 3 | Heavy load spans. |
Three gauges, 22, 20, and 18, make up the Type B Vented Deck lineup, with thickness and load capacity varying across them. For shorter spans, the lighter 22 and 20 gauges are cost-effective. When longer spans and heavier loads are involved, the thicker 18 gauge gives greater structural strength. Perforations also improve the bond with LWIC, helping it adhere and cure in insulated concrete applications.
Finishes and coatings
| Finish | Details |
|---|---|
| Galvanized G60 | Zinc coating of 0.6 oz/ft². Recommended for general environments. |
| Galvanized G90 | Zinc coating of 0.9 oz/ft². Ideal for highly corrosive environments. |
| Prime-Painted | Provides a base coat for additional protection or paint adhesion. |
| Bare Steel | Unfinished; typically for indoor use or controlled environments. |
Long-term performance comes from the galvanized (G60 and G90) and prime-painted finishes on the Type B Vented Deck. Galvanized coatings resist corrosion, and G90 gives extra protection in highly corrosive environments. Prime paint adds a base coat for projects that need further coatings. Together these finishes extend deck life and support performance in LWIC applications.
Material and finish options
The B 1.5" Vented Deck is made from high-strength 50 KSI steel. Options include a corrosion-resistant galvanized finish that meets ANSI/SDI standards, a range of painted finishes for tailored aesthetics, and bare steel for custom applications. Every finish is meant to improve durability and keep performance steady in demanding environments.
Custom lengths
Smaller projects can order deck as short as 6′-0″, and larger constructions can order spans up to 40′-0″. We deliver every length with precision and efficiency. With our custom length service for Sarasota customers, the deck matches your requirements, fits well, and wastes little.
1.5" Type B Vented Roof Deck features
Commercial applications that need ventilation and efficiency can count on the 1.5" Type B Vented Deck for lightweight durability, airflow control, and fire resistance.
Optimized for LWIC Systems
Built to improve adhesion in Lightweight Insulated Concrete (LWIC) applications for proper bonding and structural performance.
Improved Concrete Bonding
Perforations strengthen the bond between the deck and lightweight concrete, giving a robust roof system with better load distribution.
Structural & Fire Performance
SDI and ANSI compliant, with high durability and fire-rated performance in LWIC systems.
LWIC Roofing Applications
A strong fit for Lightweight Insulated Concrete (LWIC) roof systems, with strength, adhesion, and long-term performance in insulated roofing.
Compliance with SDI Standards
Steel Deck Institute (SDI) and ANSI guidelines are met, which assures quality and code compliance.
Moisture Management
Helps prevent trapped moisture, which improves durability and lowers the risk of mold or corrosion.
Installation and connections
Installation practices
- Install the deck perpendicular to the supports.
- Weld or screw the deck at each support with puddle welds or TEK screws.
- Overlap sidelaps and secure with screws at 12" o.c.
Fasteners and attachments
- 5/8" Diameter Puddle Welds
- #10 TEK screws at 6" o.c. on edges, and 12" o.c. for sidelaps
- Sidelaps attached using #10 TEK screws at 12" o.c.
Confirm the profile, gauge, span, loads and connections against your project drawings and the applicable product load tables before ordering.
Applications
Lightweight Concrete Systems
For composite slabs in LWIC systems, perforations let moisture escape while the concrete cures, which improves bonding. Condensation stays from getting trapped, structural integrity improves, and the insulated concrete system lasts.
Moisture-Controlled Roof Assemblies
In lightweight insulated concrete (LWIC) applications, the perforated profile improves adhesion and curing. Moisture can release as the concrete cures, which protects long-term insulation performance and prevents structural degradation in humid environments.
Standards and product documentation
SDI (Steel Deck Institute) specifications are met by the 1.5" B Vented deck, ensuring high standards for design and performance on Sarasota jobs.
1.5" Type B Vented Roof Deck questions
What do the perforations do on vented Type B deck?
Airflow and moisture control improve, condensation is kept from building up, and adhesion gets better in lightweight concrete applications.
In what way does vented Type B deck improve composite systems?
The bond between deck and concrete is enhanced by the small perforations, giving stronger composite action. Moisture can also escape, so there is less risk of trapped water.
Does vented Type B deck work for all Sarasota roofing applications?
Yes. It offers the most benefit in moisture-sensitive environments like vented roofing systems, where air circulation helps keep insulation from degrading and corroding.
What finishes can I order on vented Type B deck?
Choose galvanized (G60/G90) for corrosion resistance or prime-painted finishes for protection and compatibility with additional coatings.
Is structural strength affected by the vented Type B deck perforations?
No. Perforations are placed strategically, so load capacity is maintained while ventilation benefits apply to specific applications.
1.5" Composite Floor Deck
Designed to bond with poured concrete, the 1.5" composite floor deck combines a high strength-to-weight ratio with better structural efficiency. For Sarasota jobs it is available in 22 GA to 16 GA, with G60/G90 galvanized finishes, and it meets SDI and ANSI standards.
Dimensions and profile
| Property | Dimension |
|---|---|
| Profile Depth | 1.5 inches |
| Coverage Width | 36 inches |
| Rib Spacing | 6 inches (center to center) |
| Material Width | 39 inches |
Specifications: 1.5 inch rib depth, 36 inch coverage width, 6 inch rib spacing (center to center), and 39 inch material width. The extra width allows secure overlaps and strong composite action with a poured concrete slab.
Gauges and thicknesses
| Gauge | Bare steel thickness (in) | Weight (lbs/sq ft) | Typical applications |
|---|---|---|---|
| 22 | 0.0295 | 1.6 | Light-duty spans. |
| 20 | 0.0358 | 2 | Medium spans. |
| 18 | 0.0474 | 2.6 | Heavy-duty applications. |
| 16 | 0.0598 | 3 | Heavy load spans. |
Gauge options for the 1.5" composite floor deck are 22, 20, 18, and 16, so you can match the deck to the load and span. Use 22 and 20 gauge where weight and cost matter most. Use 18 and 16 gauge for heavier loading.
Finishes and coatings
| Finish | Details |
|---|---|
| Galvanized G60 | Zinc coating of 0.6 oz/ft². Recommended for general environments. |
| Galvanized G90 | Zinc coating of 0.9 oz/ft². Ideal for highly corrosive environments. |
| Prime-Painted | Provides a base coat for additional protection or paint adhesion. |
| Bare Steel | Unfinished; typically for indoor use or controlled environments. |
The 1.5" composite floor deck ships in G60 or G90 galvanized and in prime-painted. Galvanized coatings resist corrosion best, and prime paint gives projects a protective base for added coatings. Both G60 and G90 meet ASTM A653.
Material and finish options
Select our high-strength steel 1.5" composite floor deck in galvanized (meeting SDI/ANSI standards), in a painted finish for appearance, or in bare steel when the application calls for it. Durability and steady performance come with every option.
Custom lengths
For short runs, deck can be supplied at 6′-0″. For long spans, lengths reach 40′-0″. Because we cut to length, the deck fits well and little material is wasted. Contractors in Sarasota can specify exact cut lengths.
1.5" Composite Floor Deck features
Looking for a floor system that bonds well to concrete, works with fire ratings, and meets SDI requirements? Our 1.5" composite floor deck suits commercial and residential construction.
High Strength-to-Weight Ratio
Delivers exceptional load capacity at minimal weight, ideal for composite floor systems.
Structural Efficiency
Forms a composite system with concrete, with superior strength from the concrete bond.
Galvanized or Prime-Painted Finish
Durable, corrosion-resistant G60/G90 galvanized or prime-painted finishes.
Fireproofing Compatible
Accepts fireproofing materials and fire ratings for added safety in commercial and residential work.
Complies with SDI
Meets Steel Deck Institute (SDI) and ANSI guidelines for code compliance and quality.
Optimized for Spans
Gauges 22, 20, 18, and 16 keep deflection low in composite floor applications.
Installation and connections
Installation practices
- Lay the deck perpendicular to the supports.
- Attach with 5/8" diameter puddle welds or #10 TEK screws at 6" on the edges.
- Secure the sidelaps using #10 TEK screws at 12" o.c.
Fasteners and attachments
- 5/8" diameter puddle welds
- Edges: #10 TEK screws at 6" o.c.
- Sidelaps: #10 TEK screws at 12" o.c.
Confirm the profile, gauge, span, loads and connections against your project drawings and the applicable product load tables before ordering.
Applications
Composite Floor Systems
Bonds to concrete slabs and doubles as permanent formwork, reducing deflection while increasing strength.
Mezzanine Flooring
Supports heavy loads on warehouse and commercial mezzanines, and installs efficiently.
Standards and product documentation
For Sarasota projects, the 1.5" composite floor deck complies with SDI (Steel Deck Institute) specifications and ANSI standards, ensuring high standards for design and performance.
1.5" Composite Floor Deck questions
What is the main purpose of the 1.5" composite floor deck?
It forms permanent formwork for concrete slabs and works with the concrete as a composite system, increasing strength and load-bearing capacity.
What gauge range is offered for jobs in Sarasota?
From 22 GA through 16 GA. Choose the thicker gauges for heavier loads and longer spans.
What finish choices do I have?
Galvanized (G60 or G90) offers superior corrosion resistance. Prime-painted and bare steel are also available.
Do you offer custom lengths?
Yes, from 6'-0" to 40'-0", cut to size so there is minimal waste.
What makes the 1.5" composite deck right for floors?
The embossed ribs lock mechanically into the concrete, creating a composite slab where deck and concrete share the load.
2" Composite Floor Deck
Contractors in Sarasota choose the 2" composite floor deck for floor systems that need strong composite bonding with concrete. The 2 inch depth and 22 GA to 16 GA gauges make it a fit for heavier loads and longer spans.
Dimensions and profile
| Property | Dimension |
|---|---|
| Profile Depth | 2 inches |
| Coverage Width | 36 inches |
| Rib Spacing | 12 inches (center to center) |
| Rib Height | 2 inches |
A 2 inch rib depth and 36 inch standard coverage width define this profile. Rib spacing is 12 inches (center to center), and together with the material width it allows secure overlaps and excellent concrete bonding. The design targets maximum load capacity and extended spans.
Gauges and thicknesses
| Gauge | Bare steel thickness (in) | Weight (lbs/sq ft) | Typical applications |
|---|---|---|---|
| 22 | 0.0295 | 1.6 | Light-duty roofing and small spans. |
| 20 | 0.0358 | 2 | Medium spans, roofing, and siding. |
| 18 | 0.0474 | 2.6 | Heavy-duty applications. |
| 16 | 0.0598 | 3 | Heavy load spans. |
The 2" composite floor deck comes in gauges 22 through 16 for varied load and span demands. Choose 22 or 20 gauge for lightweight, economical deck on shorter spans and lighter loads. Choose 18 or 16 gauge for higher strength on longer spans and heavier loads.
Finishes and coatings
| Finish | Details |
|---|---|
| Galvanized G60 | Zinc coating of 0.6 oz/ft². Recommended for general environments. |
| Galvanized G90 | Zinc coating of 0.9 oz/ft². Ideal for highly corrosive environments. |
| Prime-Painted | Provides a base coat for additional protection or paint adhesion. |
| Bare Steel | Unfinished; typically for indoor use or controlled environments. |
The 2" composite floor deck comes with multiple finishes, among them galvanized (G60 and G90) and prime-painted, for long-term durability. Galvanized finishes offer superior corrosion resistance, while the prime-painted option is a protective base for jobs that will receive paint or coatings.
Material and finish options
This 2" composite floor deck is made of high-performance 50 KSI steel. It is available galvanized to SDI/ANSI standards, painted to improve aesthetics, or as bare steel for specialized needs, and each option is durable and reliable on a wide range of jobs.
Custom lengths
Whether you need 6′-0″ lengths for a small project or runs up to 40′-0″ for a large one, we can cut deck to your specification. The result is a precise fit with minimal waste. Cut lengths are available for Sarasota jobs of any size.
2" Composite Floor Deck features
The 2" composite floor deck delivers high load-bearing capacity, structural efficiency, and reliable concrete bonding. It is an efficient, sustainable option for heavy-duty floor construction.
Strong Load Capacity
Made for heavier loads, ideal in industrial floors and demanding applications.
Composite Efficiency
Works with concrete as a composite, giving superior strength and a thinner floor.
Galvanized or Prime-Painted Finish
Choose G60/G90 galvanized or prime-painted for durability and corrosion resistance.
Saves Concrete
Reduces concrete use and lowers material cost without losing strength.
SDI Compliance
Meets Steel Deck Institute (SDI) and ANSI guidelines, ensuring quality and code compliance.
Optimized for Long Spans
Spans greater distances with minimal deflection.
Installation and connections
Installation practices
- Install the deck perpendicular to the supports.
- Attach at every support with puddle welds or TEK screws.
- Overlap sidelaps and fasten with screws at 12" o.c.
Fasteners and attachments
- Puddle welds, 5/8" diameter
- Edges fastened with #10 TEK screws spaced 6" o.c.
- Sidelaps fastened with #10 TEK screws at 12" o.c.
Confirm the profile, gauge, span, loads and connections against your project drawings and the applicable product load tables before ordering.
Applications
Composite Floor Systems
Bonds to concrete slabs to cut deflection and add strength, for heavy-duty floors in multi-story commercial and residential construction.
Mezzanine Flooring
A durable base for warehouse and industrial mezzanines, supporting heavy loads and going in efficiently.
Standards and product documentation
Specifiers in Sarasota can count on the 2" composite floor deck to follow SDI (Steel Deck Institute) specifications, which sets high design and performance standards.
2" Composite Floor Deck questions
What is the 2" composite floor deck mainly used for?
It supports concrete slabs as permanent formwork and forms a composite system that increases structural strength and load-bearing capacity.
Which gauges are offered for Sarasota projects?
22 GA through 16 GA. Thicker gauges suit heavier loads and longer spans.
Which finishes can I choose?
Galvanized (G60 or G90) for superior corrosion resistance, prime-painted, or bare steel.
Is it available in custom lengths?
Yes, cut to any length from 6'-0" to 40'-0", with minimal waste.
What makes it right for demanding applications?
Its deeper 2 inch profile supports greater spans and heavier loads than shallower deck.
3" Composite Floor Deck
If your floor system needs longer spans and more load capacity, the 3" composite floor deck delivers. A 3 inch depth and 22 GA to 16 GA gauges provide superior strength and durability for Sarasota work. It meets SDI and ANSI standards, and G60 and G90 galvanized finishes add corrosion resistance.
Dimensions and profile
| Property | Dimension |
|---|---|
| Profile Depth | 3 inches |
| Coverage Width | 36 inches |
| Rib Spacing | 12 inches (center to center) |
| Rib Height | 3 inches |
Designed for strong, heavy-duty composite floors, the 3" composite floor deck has a 3 inch rib depth and a standard 36 inch coverage width. Ribs are spaced 12 inches (center to center) and the overall material width is 36 inches, so overlaps are efficient and concrete bonds well. Its maximum load capacity and extended spans fit demanding construction.
Gauges and thicknesses
| Gauge | Bare steel thickness (in) | Weight (lbs/sq ft) | Typical applications |
|---|---|---|---|
| 22 | 0.0295 | 1.6 | Light-duty roofing and small spans. |
| 20 | 0.0358 | 2 | Medium spans, roofing, and siding. |
| 18 | 0.0474 | 2.6 | Heavy-duty applications. |
| 16 | 0.0598 | 3 | Heavy load spans. |
The 3" composite floor deck is available in gauges 22 to 16, giving options for varied load and span requirements. Choose lightweight, economical 22 and 20 gauge for shorter spans and lighter loads. Choose 18 and 16 gauge when longer spans and heavier loads call for more structural strength and reliability in demanding use.
Finishes and coatings
| Finish | Details |
|---|---|
| Galvanized G60 | Zinc coating of 0.6 oz/ft². Recommended for general environments. |
| Galvanized G90 | Zinc coating of 0.9 oz/ft². Ideal for highly corrosive environments. |
| Prime-Painted | Provides a base coat for additional protection or paint adhesion. |
| Bare Steel | Unfinished; typically for indoor use or controlled environments. |
For long-term performance, the 3" composite floor deck is offered in galvanized (G60 and G90) and prime-painted finishes. Galvanized finishes provide superior corrosion resistance, and G90 has a higher zinc coating for locations with more exposure to moisture or chemicals. The prime-painted option is a protective base coat, a good fit when paint or coatings will be applied.
Material and finish options
Our 3" composite floor deck uses high-performance 50 KSI steel and comes galvanized (meeting SDI/ANSI standards), painted (for enhanced aesthetics), or bare (for specialized applications). Whichever finish you select, durability and dependable performance suit diverse construction settings.
Custom lengths
Deck can be furnished at lengths from 6′-0″ for smaller jobs to 40′-0″ for larger ones. We cut to your exact requirements so the fit is right and waste stays low. This applies to every Sarasota order.
3" Composite Floor Deck features
Our 3" composite floor deck combines remarkable strength, extended spans, and reliable concrete bonding for heavy-duty, efficient, and sustainable floor systems.
Exceptional Load Strength
Handles heavy loads, so it works well in industrial applications and tough construction conditions.
Composite Efficiency
Works in harmony with concrete as a composite, which thins the floor while maximizing strength.
Galvanized or Prime-Painted Finish
G60/G90 galvanized or prime-painted finishes improve durability and corrosion resistance.
Fire-Rating Compatible
Supports fireproofing materials and fire ratings, adding safety to commercial and residential projects.
SDI and ANSI Compliant
Meets Steel Deck Institute (SDI) and ANSI guidelines to ensure quality and code compliance.
Extended Spans
A 3 inch profile spans longer distances and reduces additional supports on big projects.
Installation and connections
Installation practices
- Install the deck perpendicular to the supports.
- At each support, weld or screw the deck down with puddle welds or TEK screws.
- Overlap sidelaps and fasten them with screws at 12" o.c.
Fasteners and attachments
- Puddle welds, 5/8" diameter
- #10 TEK screws at 6" o.c. on edges, 12" o.c. on sidelaps
- Sidelap fastening with #10 TEK screws at 12" o.c.
Confirm the profile, gauge, span, loads and connections against your project drawings and the applicable product load tables before ordering.
Applications
Long-Span Composite Floors
The 3" Composite Floor Deck is made for long spans, so fewer columns are needed. It improves structural efficiency and carries heavy loads in warehouses, distribution centers, and large commercial spaces.
Heavy Equipment Platforms
The 3" Composite Floor Deck forms durable platforms for heavy machinery, handling concentrated loads and spreading them better in industrial facilities and manufacturing plants.
Standards and product documentation
The 3" composite floor deck is built to SDI (Steel Deck Institute) specifications, so builders in Sarasota get dependable design and performance.
3" Composite Floor Deck questions
What is the primary purpose of the 3" composite floor deck?
The 3" Composite Floor Deck is permanent formwork that structurally supports concrete slabs and forms a composite system well suited to long spans and heavy loads.
What gauges are available for the 3" composite floor deck for jobs in Sarasota?
22 GA to 16 GA, which gives flexibility across load capacities and structural requirements.
What finishes can I order for the 3" composite floor deck?
Galvanized (G60 or G90) finishes resist corrosion, prime-painted suits projects needing more coatings, and bare steel is for specific applications.
Is custom length cutting offered for the 3" composite floor deck?
Yes, from 6'-0" to 40'-0", for a precise fit and less material waste on site.
What makes the 3" composite floor deck right for large-scale projects?
The deeper 3 inch profile carries longer spans and heavier loads, which is why it is preferred in industrial facilities, warehouses, and multi-story construction requiring maximum durability.
9/16" Type S Form Deck
Permanent formwork for concrete slabs in floor and roof systems is the main job of Type S Form Deck, valued for its strength and easy installation. Contractors in Sarasota can order it in gauges from 28 GA to 20 GA, manufactured to SDI and ANSI standards.
Dimensions and profile
| Property | Dimension |
|---|---|
| Profile Depth | 9/16 inches |
| Coverage Width | 36 inches |
| Rib Spacing | 2.57 inches (center to center) |
| Rib Height | 9/16 inches |
Rapid slab forming is the strength of Type S Form Deck: a shallow 9/16-inch rib depth and a standard 36-inch coverage width. The 2.57-inch rib spacing (center to center) creates a stable forming surface that minimizes concrete volume and maintains structural integrity.
Gauges and thicknesses
| Gauge | Bare steel thickness (in) | Weight (lbs/sq ft) | Typical applications |
|---|---|---|---|
| 28 | 0.0149 | 0.65 | Light-duty concrete formwork, low-load applications. |
| 26 | 0.0179 | 0.75 | Standard concrete slabs. |
| 24 | 0.0239 | 1.0 | Medium-duty floor and roof slabs. |
| 22 | 0.0299 | 1.25 | Medium-duty floors, multi-level buildings. |
| 20 | 0.0358 | 1.5 | Heavy-duty formwork, bridges. |
Type S Form Deck comes in gauges 28, 26, 24, 22, and 20. Gauges 28 and 26, the lighter ones, are economical for standard concrete slabs. Gauges 22 and 20 deliver greater strength for longer spans and heavier concrete loads, as in bridges and industrial floors.
Finishes and coatings
| Finish | Details |
|---|---|
| Galvanized G60 | Zinc coating of 0.6 oz/ft². Recommended for general environments. |
| Galvanized G90 | Zinc coating of 0.9 oz/ft². Ideal for highly corrosive environments. |
| Prime-Painted | Provides a base coat for additional protection or paint adhesion. |
| Bare Steel | Unfinished; typically for indoor use or controlled environments. |
Galvanized (G60 and G90) and prime-painted finishes are available on Type S Form Deck. Corrosion resistance comes from the galvanized coating, with G90 providing more protection in highly corrosive environments. G60 and G90 finishes conform to ASTM A653.
Material and finish options
Our Type S Form Deck is made from high-strength 80 KSI steel. Choose a corrosion-resistant galvanized finish that meets SDI/ANSI standards, one of several painted finishes for a tailored look, or bare steel for custom applications. Every finish is meant to improve durability and keep performance steady in demanding environments.
Custom lengths
Deck lengths start at 6′-0″ for smaller jobs and run up to 40′-0″ for large builds. We cut to the length you specify for projects in Sarasota and elsewhere, so the deck fits properly and leftover material stays low.
9/16" Type S Form Deck features
Looking for a form deck with strong structure, efficient concrete forming, and corrosion-resistant finishes? Type S Form Deck is a cost-effective, versatile option for multi-level buildings, bridges, and tunnel work.
High Structural Strength
Designed to support concrete slabs, giving stability and structural strength during and after concrete placement.
Efficient Concrete Formwork
This quick-to-build form deck suits slab forming in multi-level buildings, bridges, and tunnels, and it reduces labor time and material costs.
Galvanized or Prime-Painted Finish
G60/G90 galvanized or prime-painted finishes add durability and corrosion resistance where conditions are demanding.
Cost-Effective Solution
A lightweight, shallow profile limits concrete use while offering a stable forming surface, so overall project costs drop.
Compliance with SDI Standards
Conforms to Steel Deck Institute (SDI) and ANSI guidelines, supporting quality and code compliance.
Versatile Design Options
Gauges 28 through 20, G60/G90 galvanized coatings, and custom lengths between 6 and 40 feet.
Installation and connections
Installation practices
- Lay the deck perpendicular to the supports.
- At each support, fasten with pins, powder-actuated fasteners, or TEK screws.
- Lap the sidelaps and secure them with screws at 12" o.c.
Fasteners and attachments
- Pins or powder-actuated fasteners attach the deck to supports
- #10 TEK screws at 6" o.c. along edges and 12" o.c. at sidelaps
- Sidelaps joined with button punching or #10 TEK screws at 12" o.c.
Confirm the profile, gauge, span, loads and connections against your project drawings and the applicable product load tables before ordering.
Applications
Composite Floor Slabs
Slab forming in multi-level buildings, bridges, and tunnels is an ideal fit. The shallow rib profile cuts concrete volume and provides an efficient, stable forming surface.
Bridge and Tunnel Formwork
Type S Form Deck sees wide use as permanent concrete formwork in bridge decks and tunnels, where it supports the structure during concrete placement.
Standards and product documentation
Type S Form Deck is built to SDI (Steel Deck Institute) specifications and ANSI standards, which supports consistent design and performance for Sarasota projects.
9/16" Type S Form Deck questions
What is Type S form deck used for?
It is permanent formwork for concrete slabs in floor and roof systems. It gives a stable base while concrete is placed and stays in place once the concrete has cured.
How does form deck differ from composite deck?
Form deck is only formwork, and the cured concrete slab carries the load on its own. Composite deck bonds structurally with the concrete, so the two share the load permanently.
Which gauges does Type S form deck come in?
Gauges 28, 26, 24, 22, and 20 GA, with thicknesses from 0.0149" to 0.0358".
How should Type S form deck be fastened?
Use pins, powder-actuated fasteners, or TEK screws. Sidelaps are secured by button punching or #10 TEK screws at 12" o.c.
Is custom-length Type S form deck available in Sarasota?
Yes. Custom lengths run from 6'-0" to 40'-0", which cuts material waste and gives each project a precise fit.
1" Type HD Form Deck
Floors and roofs that need heavy-duty concrete formwork are served by Type HD Form Deck, with superior support and durability. Gauges span 26 GA to 20 GA, letting it manage greater loads and longer spans efficiently. It meets SDI and ANSI standards and comes in galvanized finishes like G60 and G90 for greater corrosion resistance, ready for Sarasota jobs.
Dimensions and profile
| Property | Dimension |
|---|---|
| Profile Depth | 1 inch |
| Coverage Width | 36 inches |
| Rib Spacing | 4 inches (center to center) |
| Rib Height | 1 inch |
Heavy-duty concrete formwork in floors and roofs is where Type HD Form Deck fits best, with a 1-inch rib depth and 36-inch coverage width. Rib spacing is 4 inches (center to center), and the 39-inch overall material width makes for secure overlaps and excellent concrete support. The profile takes on greater loads and reduces material costs, giving strength and durability for demanding projects.
Gauges and thicknesses
| Gauge | Bare steel thickness (in) | Weight (lbs/sq ft) | Typical applications |
|---|---|---|---|
| 26 | 0.0179 | 0.75 | Light-duty concrete formwork, low-load floors. |
| 24 | 0.0239 | 1.0 | Standard floors, light industrial applications. |
| 22 | 0.0299 | 1.25 | Medium-duty floors, parking structures. |
| 20 | 0.0359 | 1.5 | Heavy-duty formwork, bridges, industrial slabs. |
Type HD Form Deck comes in gauges 26, 24, 22, and 20. Gauges 26 and 24 are the lighter, cost-effective choices for standard concrete slabs and moderate spans. For longer spans and heavier concrete loads, such as industrial floors, bridges, and parking structures, gauges 22 and 20 give superior strength and support.
Finishes and coatings
| Finish | Details |
|---|---|
| Galvanized G60 | Zinc coating of 0.6 oz/ft². Recommended for general environments. |
| Galvanized G90 | Zinc coating of 0.9 oz/ft². Ideal for highly corrosive environments. |
| Prime-Painted | Provides a base coat for additional protection or paint adhesion. |
| Bare Steel | Unfinished; typically for indoor use or controlled environments. |
For durability and long-term performance, Type HD Form Deck is supplied in galvanized (G60 and G90) and prime-painted finishes. Galvanizing gives excellent corrosion resistance, and G90 has a thicker zinc layer to protect in high-moisture or chemical environments. The prime-painted finish adds a protective base coat. G60 and G90 finishes conform to ASTM A653 specifications.
Material and finish options
Our Type HD Deck is made of high-strength 80 KSI steel. You can choose a corrosion-resistant galvanized finish to SDI/ANSI standards, painted finishes for tailored aesthetics, or bare steel for custom applications. The finishes all exist to enhance durability and maintain performance in demanding environments.
Custom lengths
Lengths range from 6′-0″ for smaller projects to 40′-0″ for extensive spans on larger ones. Our custom length service is designed around what you specify, for an optimal fit with minimal waste on Sarasota projects and others.
1" Type HD Form Deck features
Our 1" Type HD Form Deck offers heavy-duty load support, efficient concrete bonding, and improved durability. It suits industrial floors, bridge formwork, and other demanding structural applications.
Heavy-Duty Load Support
Higher concrete loads are what Type HD Form Deck is engineered for, making it ideal when superior strength and stability matter.
Efficient Concrete Bonding
The deep profile carries thicker concrete slabs, which spreads load better and supports long-term performance.
Galvanized or Prime-Painted Finish
G60/G90 galvanized or prime-painted finishes are available for durability and corrosion resistance.
Cost-Effective Formwork Solution
A fit for heavy-duty work such as parking structures, bridge formwork, and industrial floors, and it adapts easily to complex construction needs.
Compliance with SDI Standards
It meets Steel Deck Institute (SDI) and ANSI guidelines, so quality and code compliance are assured.
Versatile Gauge Options
Gauges 26 GA to 20 GA let you meet specific load requirements without losing durability.
Installation and connections
Installation practices
- Run the deck perpendicular to the supports.
- At each support, secure the deck with pins, powder-actuated fasteners, or TEK screws.
- Overlap the sidelaps and fasten with screws at 12" o.c.
Fasteners and attachments
- Pins or powder-actuated fasteners secure the deck to the supports
- #10 TEK screws at 6" o.c. on edges and 12" o.c. for sidelaps
- Sidelaps attached through button punching or #10 TEK screws at 12" o.c.
Confirm the profile, gauge, span, loads and connections against your project drawings and the applicable product load tables before ordering.
Applications
Heavy Industrial Floor Systems
For heavy industrial floors, Type HD Form Deck supports high-load equipment and machinery. Its durable design keeps performing in demanding industrial environments.
Bridge and Highway Formwork
Type HD Form Deck is a common permanent formwork in bridge and highway construction. It carries heavy concrete loads during placement and adds lasting strength to the structure.
Standards and product documentation
Specifications from the SDI (Steel Deck Institute) apply to Type HD Form Deck, supporting high standards of design and performance.
1" Type HD Form Deck questions
What is Type HD Form Deck mainly used for?
Mostly as permanent formwork for heavy-duty concrete slabs in industrial floors, bridges, and infrastructure projects. It holds wet concrete during placement and stays in place after curing.
Which gauges does Type HD Form Deck come in?
26 GA, 24 GA, 22 GA, and 20 GA, which cover a range of load capacities and project requirements.
Is temporary shoring needed with Type HD Form Deck?
It can be. Temporary shoring may be required during installation to carry the weight of the deck and wet concrete until the slab has fully cured.
How is Type HD Form Deck usually fastened?
With pins, powder-actuated fasteners, or TEK screws. Sidelaps are secured by button punching or screws at 12" o.c.
Is Type HD Form Deck available in custom lengths in Sarasota?
Yes, from 6'-0" to 40'-0". That keeps material waste low and gives each project a precise fit.
Type BI Inverted Form Deck
Type B Inverted Form Deck is permanent formwork for concrete slabs in floor and roof systems, offered in gauges 22 GA through 16 GA. It was designed for architectural ceilings where the soffit stays exposed, and Sarasota schools, offices, and commercial buildings are typical uses.
Dimensions and profile
| Property | Dimension |
|---|---|
| Profile Depth | 1.5 inches |
| Coverage Width | 36 inches |
| Rib Spacing | 6 inches (center to center) |
| Rib Height | 1.5 inches |
Rib depth is 1.5 inches and standard coverage width is 36 inches on Type BI Inverted Form Deck. Install it with the ribs pointing upward and a smooth flat soffit remains exposed underneath, producing an architectural ceiling with no additional finishes. Ribs are 6 inches apart (center to center), which preserves structural integrity while allowing for concrete placement.
Gauges and thicknesses
| Gauge | Bare steel thickness (in) | Weight (lbs/sq ft) | Typical applications |
|---|---|---|---|
| 22 | 0.0299 | 1.25 | Light-duty floors and ceilings. |
| 20 | 0.0358 | 1.5 | Standard commercial floor systems. |
| 18 | 0.0474 | 2.6 | Heavy-duty applications, parking structures. |
| 16 | 0.0598 | 3.0 | Heavy load industrial floors. |
The gauge lineup for Type BI Inverted Form Deck is 22, 20, 18, and 16. Standard commercial applications suit the lighter gauges (22 and 20). When you need more strength for parking structures or heavy industrial floor systems, use gauges 18 and 16.
Finishes and coatings
| Finish | Details |
|---|---|
| Galvanized G60 | Zinc coating of 0.6 oz/ft². Recommended for general environments. |
| Galvanized G90 | Zinc coating of 0.9 oz/ft². Ideal for highly corrosive environments. |
| Prime-Painted | Provides a base coat for additional protection or paint adhesion. |
| Bare Steel | Unfinished; typically for indoor use or controlled environments. |
Galvanized (G60 and G90) and prime-painted finishes are available for Type BI Inverted Form Deck. Galvanizing resists corrosion, and G90 adds protection in highly corrosive environments. G60 and G90 finishes conform to ASTM A653.
Material and finish options
Specify Type BI Inverted Form Deck in high-strength steel with a corrosion-resistant galvanized finish that meets ANSI/SDI standards. Painted finishes are available for tailored aesthetics, and bare steel is available for custom applications. Durability and steady performance are the goals behind each finish.
Custom lengths
Need 6′-0″ lengths for a small project or spans up to 40′-0″ for a large one? We handle both. Our custom length service is built around your requirements for Sarasota and beyond, so the deck fits optimally and waste stays minimal.
Type BI Inverted Form Deck features
Type BI Inverted Form Deck offers high structural strength, efficient formwork, and corrosion-resistant finishes. It fits architectural ceilings, multi-level parking structures, and commercial floor systems that need exposed soffits.
High Structural Strength
Carries concrete and live loads and also gives you a finished, exposed ceiling surface.
Efficient Formwork
As permanent formwork for concrete slabs, it saves labor and construction time because no temporary forms need to be removed.
Corrosion Resistance
G60/G90 galvanized or prime-painted finishes hold up against corrosion in commercial environments.
Cost-Effective
One product handles both formwork and structural support, which lowers material and labor costs for exposed ceilings.
Compliance with Standards
SDI and ANSI guidelines are met, so quality and code compliance carry across applications.
Versatile Options
A choice of gauges (22–16 GA) and finishes covers different load requirements and architectural specifications.
Installation and connections
Installation practices
- Set the deck perpendicular to the supports with the ribs pointing upward.
- Use pins, powder-actuated fasteners, or TEK screws to fasten at each support.
- Lap sidelaps and secure them at 12" o.c. with button punching or screws.
Fasteners and attachments
- Pins or powder-actuated fasteners secure the deck to supports
- #10 TEK screws at 6" o.c. on edges
- Sidelaps attached through button punching or #10 TEK screws at 12" o.c.
Confirm the profile, gauge, span, loads and connections against your project drawings and the applicable product load tables before ordering.
Applications
Industrial Flooring with Exposed Ceiling
Strong support for industrial floor systems plus an architecturally finished exposed soffit, which suits schools, offices, and civic buildings.
Multi-Level Parking Structures
A frequent choice for parking garages, giving permanent formwork and a clean exposed underside that cuts finishing costs.
Standards and product documentation
Type BI Inverted Form Deck meets SDI (Steel Deck Institute) specifications and ANSI standards, supporting solid design and performance on Sarasota jobs.
Type BI Inverted Form Deck questions
Which projects use Type BI inverted form deck?
It appears in architectural ceiling systems, multi-level parking structures, schools, offices, and facilities needing an attractive exposed soffit.
What is different about installing Type BI?
The deck is installed inverted, ribs up, so the flat side faces down as a finished ceiling surface and needs no added finishing materials.
What gauge options exist?
Gauges 22, 20, 18, and 16 GA cover a range of structural requirements.
What finish options are there?
Corrosion resistance comes from G60 and G90 galvanized finishes, and prime-painted finishes add protection.
Does Type BI come in custom lengths for Sarasota jobs?
Yes, from 6'-0" to 40'-0", so each project gets a precise fit with minimal waste.
Planning your order
Steel Deck supply for Sarasota
Send your project drawings or material list so our team can review quantities, profile requirements and cut lengths. We can help with takeoffs and shop drawings, then confirm pricing and delivery options for your Sarasota project.
Send your drawings for a quoteWhat to include in your quote request
- The profile, gauge and finish shown in your specifications.
- Quantities and lengths, or the drawings we can take them off from.
- The Sarasota job site address, your target delivery date and any access limits.
- Load tables, attachment details or other documents your engineer specified.
How We Work
We Guide You Through the Process
From manufacturing to delivery, we ensure precision, efficiency, and compliance with industry standards.
Takeoff and Shop Drawings Services
We provide specialized takeoff services for accurate quotations and detailed shop drawings to produce optimized cutting lists for sheets, ensuring efficient execution and waste-free outcomes in your projects.
Manufacture
We manufacture metal decks to SDI and ANSI standards, ensuring strength, durability, and compliance. We provide custom lengths and high-precision fabrication for optimized performance in roof, floor, and form deck applications.
Swift Deliveries & Nationwide Reach
While based in South Florida, we serve clients nationwide, ensuring quality, efficiency, and timely deliveries across the U.S., reflecting our commitment to excellence without boundaries.
Frequently Asked Questions
Where can I get steel deck in Sarasota?
Miami Metal Deck delivers to Sarasota with same-day pickup in Miami Gardens and 1-day delivery to most Florida cities. Call 305-760-2575.
Do you provide shop drawings?
Yes. We offer complete takeoff services, shop drawings, and optimized cutting lists for all steel deck orders.
What steel deck products does Miami Metal Deck sell?
Roof deck (Type B, Vented Type B, Type N), composite floor deck in several profiles, and form deck (Type S, HD, BI). Each is offered in various gauges and galvanized finishes.
Roof deck, composite deck, form deck: how do they differ?
Roof deck is built to support insulation and roofing systems. Composite deck bonds with poured concrete to make a load-bearing floor slab. Form deck is concrete formwork, temporary or permanent.
Which gauges and finishes are available?
Depending on the product type, we stock gauges 16 to 28. Galvanized finishes come in G60 and G90, and custom lengths run from 6 to 40 feet.
Do you help with takeoffs and shop drawings?
We do. Our engineering team offers specialized takeoff services, detailed shop drawings, and optimized cutting lists for accurate quotations and efficient project execution in Sarasota and elsewhere.
What standards do the products follow?
Steel deck products comply with ANSI/SDI standards (RD-2017 for roof deck, C-2017 for composite floor deck, NC-2017 for non-composite form deck), and we are a Steel Deck Institute member.