SDI Member · ANSI/SDI compliant
Steel Deck Supplier in Melbourne
High-performance steel deck in Melbourne for durable, efficient structures. Roof deck, composite floor deck, and form deck.
Steel Deck for Melbourne job sites
Builders in Melbourne order Steel Deck directly from Miami Metal Deck for commercial and industrial projects throughout Brevard County and the Space & Treasure Coasts region. Deliveries to Melbourne leave our Miami Gardens facility on a schedule set with your team, with 1-day service available to major Florida cities.
With Melbourne's coastal humidity and salt air, many engineers specify a G90 galvanized finish for its heavier zinc coating; we confirm the finish against your project specifications. Projects in Melbourne follow the Florida Building Code wind-load requirements, so we work directly from your engineer's deck schedule, gauges and attachment details.
Product guide
Product specifications for your Melbourne project
Compare profiles, dimensions, material options and applications to prepare your order. Select a product below to explore its technical details.
1.5" Type B Roof Deck
Gauges from 22 GA to 16 GA, SDI and ANSI compliance, and galvanized finishes such as G60 and G90 are what you get from our 1.5 Type B metal deck, supplied for projects in Melbourne. Built for roof applications, it combines structural strength with easy installation, and the galvanizing adds durability and corrosion resistance for roofing projects in Melbourne.
Dimensions and profile
| Property | Dimension |
|---|---|
| Profile Depth | 1.5 inches |
| Coverage Width | 36 inches |
| Rib Spacing | 6 inches (center to center) |
| Rib Height | 1.5 inches |
This 1.5" Type B metal deck has a 1.5 inch rib depth and a standard coverage width of 36 inches, which makes it structurally efficient for roofing and flooring. Ribs sit 6 inches apart (center to center), and the 39 inch overall material width gives secure overlaps and strong composite action with concrete slabs. The profile maximizes strength at minimal weight, so it works across many kinds of construction.
Gauges and thicknesses
| Gauge | Bare steel thickness (in) | Weight (lbs/sq ft) | Typical applications |
|---|---|---|---|
| 22 | 0.0295 | 1.6 | Light-duty roofing and small spans. |
| 20 | 0.0358 | 2 | Medium spans, roofing, and siding. |
| 18 | 0.0474 | 2.6 | Heavy-duty applications. |
| 16 | 0.0598 | 3 | Heavy load spans. |
There are four gauges to choose from for Type B deck: 22, 20, 18, and 16. Each has different thickness and load capacity, so you can fit the deck to the project. Light and cost-effective, 22 and 20 gauge are best on shorter spans and lighter loads. Stronger 18 and 16 gauge carry longer spans and heavier loads, which makes them ideal for demanding applications.
Finishes and coatings
| Finish | Details |
|---|---|
| Galvanized G60 | Zinc coating of 0.6 oz/ft². Recommended for general environments. |
| Galvanized G90 | Zinc coating of 0.9 oz/ft². Ideal for highly corrosive environments. |
| Prime-Painted | Provides a base coat for additional protection or paint adhesion. |
| Bare Steel | Unfinished; typically for indoor use or controlled environments. |
Several finishes are available so the Type B deck lasts, among them galvanized (G60 and G90) and prime-painted. All galvanized finishes resist corrosion, but G90 has more zinc and is better where moisture or chemicals are a bigger concern. A prime-painted deck arrives with a protective base coat, so it works well when more coats of paint or coatings will follow.
Material and finish options
Steel is offered in 33 KSI, 40 KSI, 50 KSI, and 80 KSI grades, each engineered for a particular structural demand and balancing strength against flexibility. Both galvanized (G60/G90) and prime-painted finishes conform to ASTM A653 for corrosion resistance.
Custom lengths
Need a short piece or a long one? We cut deck from 6′-0″ for smaller projects to 40′-0″ for large ones, accurately and efficiently. Ordering custom lengths for your Melbourne job means a better fit and less scrap.
1.5" Type B Roof Deck features
With its light weight, durability, fire resistance, and sustainable design, our 1.5" Type B metal deck lifts the performance of efficient, eco-friendly short-span commercial applications.
High Strength-to-Weight Ratio
Exceptional load capacity at low weight suits roofing systems well.
Standard 36 inches Coverage
Coverage is 36 inches wide with a consistent rib design, so installation takes less time and runs more efficiently.
Galvanized or Prime-Painted Finish
Galvanized G60/G90 or prime-painted: either finish improves durability and resists corrosion.
Compatibility with Roofing Systems
Fits roofing systems that use insulation, waterproofing, reflective coatings, drainage, ventilation, and other components.
Compliance with Standards
Steel Deck Institute (SDI) and ANSI guidelines are met, which assures quality and code compliance.
Wide Gauge Range
Choose 22, 20, 18, or 16 gauge to customize the deck for specific load-bearing requirements and project demands.
Installation and connections
Installation practices
- Place the deck perpendicular to the supports.
- Secure the deck to each support using puddle welds or TEK screws.
- Overlap the sidelaps, then screw them down at 12" o.c.
Fasteners and attachments
- 5/8" Diameter Puddle Welds
- #10 TEK screws at 6" o.c. on edges, and 12" o.c. for sidelaps
- Sidelaps attached using #10 TEK screws at 12" o.c.
Confirm the profile, gauge, span, loads and connections against your project drawings and the applicable product load tables before ordering.
Applications
Roof Deck Applications
Type B sees wide use in commercial and industrial roof systems where structural strength and durability are essential. Roofing insulation systems sit on it, and it handles vented and non-vented roofing alike.
Hybrid Structural-Ceiling Systems
Left exposed as a ceiling element in architectural spaces, Type B decking provides structural strength and a clean finish. That also reduces the need for added materials and shortens installation time.
Standards and product documentation
The 1.5" Type B deck meets SDI (Steel Deck Institute) specifications, which sets a high bar for design and performance on Melbourne projects.
1.5" Type B Roof Deck questions
Which gauge is used most often for Type B decking?
Most projects use 20 gauge, since it balances cost and strength for typical applications. Specific project requirements may call for a different gauge.
How do G60 and G90 galvanized finishes differ?
G60 has a 0.60 oz/ft² coating and G90 has 0.90 oz/ft², which is 50% more zinc and better corrosion resistance. G60 fits indoor use or low-moisture settings. G90 is the choice for outdoor use, roofing, steel decking, and structures exposed to weather, humidity, or corrosive conditions.
How far can the 1.5" Type B deck span?
Gauge, span type, and load requirements all affect maximum span. As an example, 22-gauge deck can span up to 8 feet over multiple spans, and 16-gauge deck can reach up to 14 feet. Check the load tables for exact values.
Can 1.5" Type B metal deck be customized for a project in Melbourne?
Yes. Gauge, finish, and length can all be customized. Custom lengths are cut to the project, which cuts waste and makes installation more efficient.
Is 1.5" Type B metal deck compliant with industry standards?
Yes. It follows Steel Deck Institute (SDI) standards and American Iron and Steel Institute (AISI) design guidelines, which supports quality, safety, and compatibility with building codes.
3" Type N Roof Deck
Because of its long-span capability and structural strength, 3" Type N metal deck is widely specified for roofs. The Type N profile is 3 inches deep, with gauges from 22 GA to 16 GA for flexibility on roofing projects in Melbourne. It complies with SDI and ANSI standards and is offered in galvanized finishes such as G60 and G90.
Dimensions and profile
| Property | Dimension |
|---|---|
| Profile Depth | 3 inches |
| Coverage Width | 24 inches |
| Rib Spacing | 8 inches (center to center) |
| Rib Height | 3 inches |
A 3 inch profile depth and a 24 inch coverage width define the Type N Roof Deck, which also has 8 inch rib spacing (center to center) and a 3 inch rib height. The deep rib is what gives the profile its strength on long spans and heavy roof loads, and the wide coverage means fewer sheets to set.
Gauges and thicknesses
| Gauge | Bare steel thickness (in) | Weight (lbs/sq ft) | Typical applications |
|---|---|---|---|
| 22 | 0.0295 | 1.8 | Light duty roofs. |
| 20 | 0.0358 | 2.2 | Standard commercial roofs. |
| 18 | 0.0474 | 2.9 | Heavy load areas. |
| 16 | 0.0598 | 3.7 | Long spans, high loads. |
Gauges for Type N deck include 22, 20, 18, and 16, giving a spread of thicknesses and load capacities for each project. Lightweight, cost-effective 22 and 20 gauge fit shorter spans and lighter loads. For demanding applications, 18 and 16 gauge deliver greater structural strength and support longer spans and heavier loads.
Finishes and coatings
| Finish | Details |
|---|---|
| Galvanized G60 | Zinc coating of 0.6 oz/ft². Recommended for general environments. |
| Galvanized G90 | Zinc coating of 0.9 oz/ft². Ideal for highly corrosive environments. |
| Prime-Painted | Provides a base coat for additional protection or paint adhesion. |
| Bare Steel | Unfinished; typically for indoor use or controlled environments. |
Type N deck is available with several finishes for lasting performance, including galvanized (G60 and G90) and prime-painted. Galvanizing resists corrosion well, and G90 has a heavier zinc coating for environments with more moisture or chemical exposure. Prime paint adds a base coat, so it fits projects that call for extra paint or coatings.
Material and finish options
Our Type N 3" Roof Deck uses high-strength 80 KSI steel. It is offered with a corrosion-resistant galvanized finish meeting ANSI standards, prime-painted finishes for added protection, or bare steel for specialized applications. Each finish is engineered for durability and dependable performance in demanding roofing environments.
Custom lengths
Deck lengths run from 6′-0″ on smaller roofing projects to 40′-0″ on large-scale construction, and the 3" Type N Roof Deck is supplied accurately and efficiently. Custom lengths for Melbourne jobs give an optimal fit, reduce waste, and streamline installation.
3" Type N Roof Deck features
Our 3" Type N roof deck delivers superior strength, fire-rated performance, and long-span efficiency. It is well suited to large commercial roofs and sustainable building applications.
Deep Rib Profile for High Strength
The 3-inch rib depth gives superior strength, which suits longer spans and heavy roofing loads.
Wide Coverage Efficiency
Standard 24-inch coverage lowers material usage and simplifies installation, perfect for large-scale projects.
Corrosion-Resistant Finish Options
G60 or G90 galvanized finishes are available, with excellent durability and resistance to harsh environmental conditions.
Fire and Acoustic Performance
Fire-rating standards are met when used in approved assemblies, and insulation is supported for soundproofing and thermal efficiency.
Compliance with SDI Standards
Follows Steel Deck Institute (SDI) and ANSI guidelines, so quality and code compliance are ensured.
Long Span Capability
Offered in 22, 20, 18, and 16 gauges to customize for load-bearing requirements and project demands.
Installation and connections
Installation practices
- Lay the deck perpendicular to the supports.
- Fasten the deck at every support with puddle welds or TEK screws.
- Overlap sidelaps and secure them with screws at 12" o.c. (on center).
Fasteners and attachments
- 5/8" Diameter Puddle Welds
- #12 or #14 TEK screws at 6" o.c. on edges, and 12" o.c. for sidelaps
- Sidelaps attached using #12 TEK screws at 12" o.c.
Confirm the profile, gauge, span, loads and connections against your project drawings and the applicable product load tables before ordering.
Applications
Long-Span Roofing Systems
Large commercial and industrial roofs that need long spans and fewer supports are a perfect match for Type N. The 3-inch rib profile gives exceptional strength and efficiency across expansive roof designs.
Fire-Rated Roof Assemblies
Fire-rated roof systems commonly use Type N, which works with insulation and fireproofing materials. It supports safety and performance in demanding commercial and industrial applications.
Standards and product documentation
The 3" Type N deck complies with SDI (Steel Deck Institute) specifications, which sets high standards for design and performance on Melbourne roofs.
3" Type N Roof Deck questions
What are the typical uses of 3" Type N Roof Deck?
Long-span roofing is its purpose. It provides structural support for commercial and industrial roof systems.
What spans can Type N Roof Deck handle?
Span depends on gauge, and Type N Deck can reach up to 16 feet, which reduces intermediate supports.
Which gauges are offered for the 3" Type N Roof Deck?
You can choose from 16 GA to 22 GA to meet different load and span requirements.
Is Type N Roof Deck compatible with fire-rated roofing systems in Melbourne?
Yes. It supports fire-rated assemblies and works with insulation and fireproofing materials for enhanced safety.
Which finishes can I get on Type N Roof Deck?
Galvanized (G60 or G90) for corrosion resistance, plus prime-painted options for extra protection.
1.5" Type B Vented Roof Deck
Designed for Lightweight Insulated Concrete (LWIC) applications, the 1.5" Type B Vented Deck improves bonding and load distribution. This vented Type B profile is 1.5 inches deep and comes in gauges from 22 GA to 18 GA, so it adapts to different projects in Melbourne. It complies with SDI and ANSI standards and is offered in galvanized finishes such as G60 and G90 for durability and corrosion resistance.
Dimensions and profile
| Property | Dimension |
|---|---|
| Profile Depth | 1.5 inches |
| Coverage Width | 36 inches |
| Rib Spacing | 6 inches (center to center) |
| Rib Height | 1.5 inches |
Ideal for Lightweight Insulated Concrete (LWIC) applications, the 1.5" Type B Vented Deck has a rib depth of 1.5 inches and a standard coverage width of 36 inches. A 6 inch rib spacing (center to center) and a 39 inch overall width provide secure overlaps and strong composite action with concrete slabs. Perforations in the profile improve adhesion and help LWIC cure correctly, maximizing strength, durability, and efficiency.
Gauges and thicknesses
| Gauge | Bare steel thickness (in) | Weight (lbs/sq ft) | Typical applications |
|---|---|---|---|
| 22 | 0.0295 | 1.6 | Light-duty roofing and small spans. |
| 20 | 0.0358 | 2 | Medium spans, roofing, and siding. |
| 18 | 0.0474 | 2.6 | Heavy-duty applications. |
| 16 | 0.0598 | 3 | Heavy load spans. |
Type B Vented Deck can be ordered in gauges 22, 20, and 18, which differ in thickness and load capacity to fit the needs of each project. Lighter gauges (22 and 20) are cost-effective and best for shorter spans. The thicker 18 gauge brings greater structural strength to support longer spans and heavier loads. In insulated concrete applications, the perforated design strengthens the bond with LWIC for proper adhesion and curing.
Finishes and coatings
| Finish | Details |
|---|---|
| Galvanized G60 | Zinc coating of 0.6 oz/ft². Recommended for general environments. |
| Galvanized G90 | Zinc coating of 0.9 oz/ft². Ideal for highly corrosive environments. |
| Prime-Painted | Provides a base coat for additional protection or paint adhesion. |
| Bare Steel | Unfinished; typically for indoor use or controlled environments. |
Both galvanized (G60 and G90) and prime-painted finishes are offered on the Type B Vented Deck for durability and long-term performance. G90 gives galvanized coatings extra protection in highly corrosive environments, and all galvanized options resist corrosion. For projects that need additional coatings, prime paint supplies a protective base coat. These finishes lengthen deck life and maintain performance in LWIC applications.
Material and finish options
Made from high-strength 50 KSI steel, the B 1.5" Vented Deck comes in several finishes: corrosion-resistant galvanized that meets ANSI/SDI standards, a variety of paints for tailored aesthetics, or bare steel for custom applications. These finishes are all designed to enhance durability and sustain performance in demanding environments.
Custom lengths
Lengths run from 6′-0″ on smaller projects to 40′-0″ on larger ones, and we supply all of them accurately and efficiently. Custom lengths are cut to your requirements for Melbourne projects, giving the best fit and minimal waste.
1.5" Type B Vented Roof Deck features
Airflow control, fire resistance, and lightweight durability define the 1.5" Type B Vented Deck, a good choice for commercial buildings that need ventilation and efficiency.
Optimized for LWIC Systems
Built to improve adhesion in Lightweight Insulated Concrete (LWIC) applications for proper bonding and structural performance.
Improved Concrete Bonding
Perforations strengthen the bond between the deck and lightweight concrete, giving a robust roof system with better load distribution.
Structural & Fire Performance
SDI and ANSI compliant, with high durability and fire-rated performance in LWIC systems.
LWIC Roofing Applications
A strong fit for Lightweight Insulated Concrete (LWIC) roof systems, with strength, adhesion, and long-term performance in insulated roofing.
Compliance with SDI Standards
Steel Deck Institute (SDI) and ANSI guidelines are met, which assures quality and code compliance.
Moisture Management
Helps prevent trapped moisture, which improves durability and lowers the risk of mold or corrosion.
Installation and connections
Installation practices
- Run the deck perpendicular to the supports.
- Attach the deck at every support by puddle weld or TEK screw.
- Overlap the sidelaps and fasten with screws at 12" o.c.
Fasteners and attachments
- 5/8" Diameter Puddle Welds
- #10 TEK screws at 6" o.c. on edges, and 12" o.c. for sidelaps
- Sidelaps attached using #10 TEK screws at 12" o.c.
Confirm the profile, gauge, span, loads and connections against your project drawings and the applicable product load tables before ordering.
Applications
Lightweight Concrete Systems
For composite slabs in LWIC systems, perforations let moisture escape while the concrete cures, which improves bonding. Condensation stays from getting trapped, structural integrity improves, and the insulated concrete system lasts.
Moisture-Controlled Roof Assemblies
In lightweight insulated concrete (LWIC) applications, the perforated profile improves adhesion and curing. Moisture can release as the concrete cures, which protects long-term insulation performance and prevents structural degradation in humid environments.
Standards and product documentation
Melbourne projects specifying the 1.5" B Vented deck get a product that complies with SDI (Steel Deck Institute) specifications, which sets high standards for design and performance.
1.5" Type B Vented Roof Deck questions
Why does the vented Type B deck have perforations?
They improve airflow and moisture control, stop condensation from building up, and improve adhesion in lightweight concrete applications.
How does vented Type B deck help composite systems in Melbourne?
Small perforations strengthen the bond between deck and concrete for stronger composite action. They also let moisture escape, which lowers the chance of water getting trapped.
Can vented Type B deck be used in every roofing application?
Yes, though it helps most in moisture-sensitive settings such as vented roofing systems, where air circulation protects insulation from degradation and corrosion.
Which finishes come on the vented Type B deck?
Galvanized (G60/G90) provides corrosion resistance, and prime-painted finishes provide protection and work with additional coatings.
Do the perforations reduce the structural strength of the vented Type B deck?
No. They are placed strategically so the deck keeps its load capacity and still delivers ventilation benefits for specific applications.
1.5" Composite Floor Deck
Designed to bond with poured concrete, the 1.5" composite floor deck combines a high strength-to-weight ratio with better structural efficiency. For Melbourne jobs it is available in 22 GA to 16 GA, with G60/G90 galvanized finishes, and it meets SDI and ANSI standards.
Dimensions and profile
| Property | Dimension |
|---|---|
| Profile Depth | 1.5 inches |
| Coverage Width | 36 inches |
| Rib Spacing | 6 inches (center to center) |
| Material Width | 39 inches |
Specifications: 1.5 inch rib depth, 36 inch coverage width, 6 inch rib spacing (center to center), and 39 inch material width. The extra width allows secure overlaps and strong composite action with a poured concrete slab.
Gauges and thicknesses
| Gauge | Bare steel thickness (in) | Weight (lbs/sq ft) | Typical applications |
|---|---|---|---|
| 22 | 0.0295 | 1.6 | Light-duty spans. |
| 20 | 0.0358 | 2 | Medium spans. |
| 18 | 0.0474 | 2.6 | Heavy-duty applications. |
| 16 | 0.0598 | 3 | Heavy load spans. |
Four gauges are stocked for the 1.5" composite floor deck: 22, 20, 18, and 16. The lighter 22 and 20 gauges are economical and easy to handle, while 18 and 16 gauge provide more structural strength where loads are heavier.
Finishes and coatings
| Finish | Details |
|---|---|
| Galvanized G60 | Zinc coating of 0.6 oz/ft². Recommended for general environments. |
| Galvanized G90 | Zinc coating of 0.9 oz/ft². Ideal for highly corrosive environments. |
| Prime-Painted | Provides a base coat for additional protection or paint adhesion. |
| Bare Steel | Unfinished; typically for indoor use or controlled environments. |
Galvanized G60 and G90 and prime-painted finishes are offered on the 1.5" composite floor deck. Galvanizing gives the best corrosion resistance, and the prime coat serves as a base for projects that will get additional coatings. Both G60 and G90 conform to ASTM A653.
Material and finish options
Select our high-strength steel 1.5" composite floor deck in galvanized (meeting SDI/ANSI standards), in a painted finish for appearance, or in bare steel when the application calls for it. Durability and steady performance come with every option.
Custom lengths
Deck lengths run from 6′-0″ for small jobs up to 40′-0″ for large spans. Cutting to your required length means a better fit in the field and less scrap. This applies to every Melbourne order.
1.5" Composite Floor Deck features
The 1.5" composite floor deck from our yard pairs reliable concrete bonding with fire-resistance compatibility and SDI-compliant performance, for both commercial and residential floors.
Strong for Its Weight
Carries substantial loads at low weight, which suits composite floor systems.
Efficient Composite Action
Bonds with the concrete to form a composite system, adding strength through the bond.
Galvanized or Prime-Painted Finish
Choose G60/G90 galvanized or prime-painted for durability and corrosion resistance.
Fire Rating Compatibility
Works with fireproofing materials and fire ratings, adding safety to commercial and residential buildings.
SDI and ANSI Compliant
Conforms to Steel Deck Institute (SDI) and ANSI guidelines for quality and code compliance.
Span-Ready Gauges
Offered in 22, 20, 18, and 16 gauge, with minimal deflection in composite floor applications.
Installation and connections
Installation practices
- Install perpendicular to the supports.
- Use 5/8" diameter puddle welds or #10 TEK screws at 6" along the edges.
- Fasten the sidelaps with #10 TEK screws at 12" o.c.
Fasteners and attachments
- 5/8" diameter puddle welds
- #10 TEK screws at 6" o.c. along the edges
- #10 TEK screws at 12" o.c. at the sidelaps
Confirm the profile, gauge, span, loads and connections against your project drawings and the applicable product load tables before ordering.
Applications
Composite Floor Systems
Serves as permanent formwork and bonds to concrete slabs, cutting deflection and boosting strength.
Mezzanine Flooring
Gives warehouse and commercial mezzanines a sturdy base for heavy loads, with efficient installation.
Standards and product documentation
The 1.5" composite floor deck is built to SDI (Steel Deck Institute) specifications and ANSI standards, so builders in Melbourne get dependable design and performance.
1.5" Composite Floor Deck questions
What is the 1.5" composite floor deck mainly used for?
It supports concrete slabs as permanent formwork and forms a composite system that increases structural strength and load capacity.
Which gauges can I order for Melbourne projects?
Gauges run from 22 GA to 16 GA. Heavier gauges are the better choice for greater loads and longer spans.
Which finishes are available?
You can order galvanized (G60 or G90) for strong corrosion resistance, prime-painted, or bare steel.
Is custom cutting available?
Yes. Lengths from 6'-0" to 40'-0" can be cut to order, which keeps waste low.
Why does the 1.5" composite deck work well for floors?
Its embossed rib profile grips the concrete mechanically, so the steel deck and the slab share the load as one composite slab.
2" Composite Floor Deck
The 2" composite floor deck is a versatile floor system option that bonds well with concrete for added strength. With a 2 inch depth and 22 GA to 16 GA gauges, it handles heavier loads and longer spans on Melbourne projects.
Dimensions and profile
| Property | Dimension |
|---|---|
| Profile Depth | 2 inches |
| Coverage Width | 36 inches |
| Rib Spacing | 12 inches (center to center) |
| Rib Height | 2 inches |
The 2" composite floor deck has a 2 inch rib depth and a standard 36 inch coverage width. Ribs sit 12 inches apart (center to center), and the material width supports secure overlaps and strong concrete bonding. The profile is built for maximum load capacity and extended spans.
Gauges and thicknesses
| Gauge | Bare steel thickness (in) | Weight (lbs/sq ft) | Typical applications |
|---|---|---|---|
| 22 | 0.0295 | 1.6 | Light-duty roofing and small spans. |
| 20 | 0.0358 | 2 | Medium spans, roofing, and siding. |
| 18 | 0.0474 | 2.6 | Heavy-duty applications. |
| 16 | 0.0598 | 3 | Heavy load spans. |
Gauges for the 2" composite floor deck run from 22 to 16, so you can match deck to load and span. Thin gauges (22 and 20) are light and economical for shorter spans and lighter loads. Thick gauges (18 and 16) add strength for longer spans and heavier loads.
Finishes and coatings
| Finish | Details |
|---|---|
| Galvanized G60 | Zinc coating of 0.6 oz/ft². Recommended for general environments. |
| Galvanized G90 | Zinc coating of 0.9 oz/ft². Ideal for highly corrosive environments. |
| Prime-Painted | Provides a base coat for additional protection or paint adhesion. |
| Bare Steel | Unfinished; typically for indoor use or controlled environments. |
Several finishes are offered on the 2" composite floor deck, including galvanized (G60 and G90) and prime-painted, for long service life. Galvanizing gives superior corrosion resistance. Prime paint is a protective base coat, useful when paint or other coatings will follow.
Material and finish options
The 2" composite floor deck is made from high-performance 50 KSI steel. Pick galvanized finishes that meet SDI/ANSI standards, painted finishes for a better look, or bare steel for specialized applications, and expect durable performance in varied construction settings.
Custom lengths
We supply deck anywhere between 6′-0″ (smaller projects) and 40′-0″ (larger structures). Lengths are made to your requirements, so fit is optimal and waste is minimal. Contractors in Melbourne can specify exact cut lengths.
2" Composite Floor Deck features
Looking for high load-bearing capacity, structural efficiency, and dependable concrete bonding? Our 2" composite floor deck suits heavy-duty, efficient, and sustainable floor construction.
High Load-Bearing Capacity
Engineered for heavier loads, a good match for industrial floors and demanding work.
Structural Efficiency
Acts with concrete as a composite system, delivering strength and allowing reduced floor thickness.
Galvanized or Prime-Painted Finish
Durable, corrosion-resistant G60/G90 galvanized or prime-painted finishes.
Lower Concrete Volume
Requires less concrete, which reduces material costs but not strength.
Complies with SDI
Satisfies Steel Deck Institute (SDI) and ANSI guidelines, for quality and code compliance.
Long-Span Performance
Covers longer distances with minimal deflection.
Installation and connections
Installation practices
- Position the deck perpendicular to the supports.
- Weld or screw to each support using puddle welds or TEK screws.
- Overlap the sidelaps and secure with screws at 12" o.c.
Fasteners and attachments
- 5/8" diameter puddle welds
- #10 TEK screws at 6" o.c. along edges
- #10 TEK screws at 12" o.c. on sidelaps
Confirm the profile, gauge, span, loads and connections against your project drawings and the applicable product load tables before ordering.
Applications
Composite Floor Systems
Bonds to concrete slabs to cut deflection and add strength, for heavy-duty floors in multi-story commercial and residential construction.
Mezzanine Flooring
A durable base for warehouse and industrial mezzanines, supporting heavy loads and going in efficiently.
Standards and product documentation
Specifiers in Melbourne can count on the 2" composite floor deck to follow SDI (Steel Deck Institute) specifications, which sets high design and performance standards.
2" Composite Floor Deck questions
What is the main use for the 2" composite floor deck?
It works as permanent formwork for concrete slabs and forms a composite system, which boosts structural strength and load-bearing capacity.
What gauge range is available for jobs in Melbourne?
Gauges run 22 GA to 16 GA, and the thicker gauges are better for heavier loads and longer spans.
What finishes are available?
Galvanized (G60 or G90) with superior corrosion resistance, prime-painted, and bare steel.
Does it come in custom lengths?
Yes. Deck can be cut from 6'-0" to 40'-0" with minimal waste.
Why is it suited to demanding applications?
The 2 inch depth is deeper than shallower decks, so it supports greater spans and heavier loads.
3" Composite Floor Deck
The 3" composite floor deck is a strong choice for floor systems with longer spans and higher load demands in Melbourne. It has a 3 inch depth, comes in 22 GA to 16 GA, and offers superior strength and durability. It meets SDI and ANSI standards and is offered with G60 and G90 galvanized finishes for corrosion resistance.
Dimensions and profile
| Property | Dimension |
|---|---|
| Profile Depth | 3 inches |
| Coverage Width | 36 inches |
| Rib Spacing | 12 inches (center to center) |
| Rib Height | 3 inches |
This profile has a 3 inch rib depth and 36 inch standard coverage width for superior strength in heavy-duty composite floor systems. Rib spacing is 12 inches (center to center), with a 36 inch overall material width, which provides efficient overlaps and excellent concrete bonding. It is engineered for maximum load capacity and extended spans in demanding construction.
Gauges and thicknesses
| Gauge | Bare steel thickness (in) | Weight (lbs/sq ft) | Typical applications |
|---|---|---|---|
| 22 | 0.0295 | 1.6 | Light-duty roofing and small spans. |
| 20 | 0.0358 | 2 | Medium spans, roofing, and siding. |
| 18 | 0.0474 | 2.6 | Heavy-duty applications. |
| 16 | 0.0598 | 3 | Heavy load spans. |
Gauges from 22 to 16 let the 3" composite floor deck meet a range of load and span requirements. The 22 and 20 gauges are lightweight and economical, ideal for shorter spans and lighter loads. The 18 and 16 gauges offer increased structural strength for longer spans and heavier loads, ensuring reliability in more demanding applications.
Finishes and coatings
| Finish | Details |
|---|---|
| Galvanized G60 | Zinc coating of 0.6 oz/ft². Recommended for general environments. |
| Galvanized G90 | Zinc coating of 0.9 oz/ft². Ideal for highly corrosive environments. |
| Prime-Painted | Provides a base coat for additional protection or paint adhesion. |
| Bare Steel | Unfinished; typically for indoor use or controlled environments. |
Multiple finishes are offered on the 3" composite floor deck, including galvanized (G60 and G90) and prime-painted, to ensure durability and long-term performance. Galvanizing provides superior corrosion resistance, and G90 has a higher zinc coating for greater exposure to moisture or chemicals. Prime paint acts as a protective base coat, ideal if you plan to paint or add coatings.
Material and finish options
Made from high-performance 50 KSI steel, the 3" composite floor deck can be galvanized to SDI/ANSI standards, painted for enhanced aesthetics, or left bare for specialized applications. In all cases it is built for durable, reliable performance in diverse construction settings.
Custom lengths
Whether the job calls for 6′-0″ lengths on a smaller project or spans of up to 40′-0″ on a larger one, we cut to meet your specific requirements. That means optimal fit and minimal waste. Cut lengths are available for Melbourne jobs of any size.
3" Composite Floor Deck features
Our 3" composite floor deck provides outstanding strength, extended spans, and dependable concrete bonding. It is a fit for heavy-duty, efficient, and sustainable floor systems.
Superior Load-Bearing Strength
Built for heavy loads, which makes it a good fit for industrial uses and demanding construction environments.
Structural Efficiency
Acts together with the concrete as a composite system, cutting floor thickness while maximizing strength.
Galvanized or Prime-Painted Finish
Pick G60/G90 galvanized or prime-painted finishes for better durability and corrosion resistance.
Fire Resistance Compatibility
Works with fireproofing materials and fire ratings for added safety in commercial and residential projects.
Meets SDI Standards
Follows Steel Deck Institute (SDI) and ANSI guidelines for quality and code compliance.
Long-Span Capability
The 3 inch profile spans farther, so large projects need fewer extra structural supports.
Installation and connections
Installation practices
- Lay the deck perpendicular to the supports.
- Use puddle welds or TEK screws to fasten the deck at each support.
- Lap the sidelaps and secure with screws at 12" o.c.
Fasteners and attachments
- 5/8" diameter puddle welds
- Edges: #10 TEK screws at 6" o.c.; sidelaps: #10 TEK screws at 12" o.c.
- #10 TEK screws at 12" o.c. along the sidelaps
Confirm the profile, gauge, span, loads and connections against your project drawings and the applicable product load tables before ordering.
Applications
Long-Span Composite Floors
Suited to long spans that reduce the need for columns, the 3" Composite Floor Deck boosts structural efficiency and supports heavy loads in warehouses, distribution centers, and big commercial spaces.
Heavy Equipment Platforms
In industrial facilities and manufacturing plants, the 3" Composite Floor Deck builds durable platforms for heavy machinery that handle concentrated loads and distribute them better.
Standards and product documentation
The 3" composite floor deck is built to SDI (Steel Deck Institute) specifications, so builders in Melbourne get dependable design and performance.
3" Composite Floor Deck questions
What is the primary purpose of the 3" composite floor deck?
The 3" Composite Floor Deck is permanent formwork that structurally supports concrete slabs and forms a composite system well suited to long spans and heavy loads.
What gauges are available for the 3" composite floor deck for jobs in Melbourne?
22 GA to 16 GA, which gives flexibility across load capacities and structural requirements.
What finishes can I order for the 3" composite floor deck?
Galvanized (G60 or G90) finishes resist corrosion, prime-painted suits projects needing more coatings, and bare steel is for specific applications.
Is custom length cutting offered for the 3" composite floor deck?
Yes, from 6'-0" to 40'-0", for a precise fit and less material waste on site.
What makes the 3" composite floor deck right for large-scale projects?
The deeper 3 inch profile carries longer spans and heavier loads, which is why it is preferred in industrial facilities, warehouses, and multi-story construction requiring maximum durability.
9/16" Type S Form Deck
Slab construction in floors and roofs relies on Type S Form Deck as permanent formwork, thanks to its strength and straightforward installation. Gauges run from 28 GA to 20 GA, and manufacturing meets SDI and ANSI standards. It is a regular choice for Melbourne concrete work.
Dimensions and profile
| Property | Dimension |
|---|---|
| Profile Depth | 9/16 inches |
| Coverage Width | 36 inches |
| Rib Spacing | 2.57 inches (center to center) |
| Rib Height | 9/16 inches |
With a shallow rib depth of 9/16 inch and a standard 36-inch coverage width, Type S Form Deck is well suited to quick concrete slab forming. Ribs sit 2.57 inches apart (center to center), giving a steady forming surface that limits concrete volume while keeping the structure sound.
Gauges and thicknesses
| Gauge | Bare steel thickness (in) | Weight (lbs/sq ft) | Typical applications |
|---|---|---|---|
| 28 | 0.0149 | 0.65 | Light-duty concrete formwork, low-load applications. |
| 26 | 0.0179 | 0.75 | Standard concrete slabs. |
| 24 | 0.0239 | 1.0 | Medium-duty floor and roof slabs. |
| 22 | 0.0299 | 1.25 | Medium-duty floors, multi-level buildings. |
| 20 | 0.0358 | 1.5 | Heavy-duty formwork, bridges. |
Five gauges are offered for Type S Form Deck: 28, 26, 24, 22, and 20. Choose 28 or 26 for cost-effective standard concrete slabs. Where spans are longer or concrete loads heavier, as with bridges and industrial floors, gauges 22 and 20 give superior strength.
Finishes and coatings
| Finish | Details |
|---|---|
| Galvanized G60 | Zinc coating of 0.6 oz/ft². Recommended for general environments. |
| Galvanized G90 | Zinc coating of 0.9 oz/ft². Ideal for highly corrosive environments. |
| Prime-Painted | Provides a base coat for additional protection or paint adhesion. |
| Bare Steel | Unfinished; typically for indoor use or controlled environments. |
Type S Form Deck is supplied galvanized (G60 and G90) or prime-painted. Galvanizing protects against corrosion, and G90 gives extra protection in highly corrosive conditions. G60 and G90 finishes both meet ASTM A653 specifications.
Material and finish options
Our Type S Form Deck is made from high-strength 80 KSI steel. Choose a corrosion-resistant galvanized finish that meets SDI/ANSI standards, one of several painted finishes for a tailored look, or bare steel for custom applications. Every finish is meant to improve durability and keep performance steady in demanding environments.
Custom lengths
Smaller projects can use deck as short as 6′-0″, and larger constructions can take lengths up to 40′-0″. Tell us what your Melbourne project needs and we will cut to it, aiming for the best fit with minimal waste.
9/16" Type S Form Deck features
Type S Form Deck pairs high structural strength with efficient concrete forming and corrosion-resistant finishes. It is an economical, flexible choice for multi-level buildings, bridges, and tunnel construction.
High Structural Strength
Built to carry a concrete slab, this deck keeps the structure strong and stable both while concrete is placed and after it sets.
Efficient Concrete Formwork
A fast-to-install form deck for slabs in multi-level buildings, bridges, and tunnels, cutting both labor time and material costs.
Galvanized or Prime-Painted Finish
Pick G60/G90 galvanized or prime-painted finishes for better durability and corrosion resistance in demanding environments.
Cost-Effective Solution
The lightweight, shallow profile uses less concrete and still gives a stable forming surface, which lowers total project cost.
Compliance with SDI Standards
Manufactured to Steel Deck Institute (SDI) and ANSI guidelines for quality and code compliance.
Versatile Design Options
Offered in gauges 28 through 20, with G60/G90 galvanized coatings and custom lengths from 6 to 40 feet.
Installation and connections
Installation practices
- Place the deck at right angles to the supports.
- Attach it at every support with pins, powder-actuated fasteners, or TEK screws.
- Overlap the sidelaps and fasten them with screws at 12" o.c.
Fasteners and attachments
- Deck is secured to supports with pins or powder-actuated fasteners
- #10 TEK screws at 6" o.c. on edges and 12" o.c. for sidelaps
- Sidelaps are attached by button punching or by #10 TEK screws at 12" o.c.
Confirm the profile, gauge, span, loads and connections against your project drawings and the applicable product load tables before ordering.
Applications
Composite Floor Slabs
Slab forming in multi-level buildings, bridges, and tunnels is an ideal fit. The shallow rib profile cuts concrete volume and provides an efficient, stable forming surface.
Bridge and Tunnel Formwork
Type S Form Deck sees wide use as permanent concrete formwork in bridge decks and tunnels, where it supports the structure during concrete placement.
Standards and product documentation
SDI (Steel Deck Institute) specifications and ANSI standards govern Type S Form Deck, supporting high standards of design and performance.
9/16" Type S Form Deck questions
What does Type S form deck do?
Type S form deck is permanent formwork for concrete slabs in floor and roof systems. It provides a stable base during the pour and remains in place after the concrete cures.
What separates form deck from composite deck?
Form deck is just formwork, and after curing the concrete slab bears the load by itself. Composite deck bonds with the concrete structurally and shares the load for good.
What gauges can I order in Type S form deck?
Choose from 28, 26, 24, 22, and 20 GA, with thickness from 0.0149" up to 0.0358".
What are the recommended fastening methods?
Pins, powder-actuated fasteners, or TEK screws attach Type S Form Deck. For sidelaps, use button punching or #10 TEK screws at 12" o.c.
Can Melbourne projects get Type S form deck in custom lengths?
Yes, lengths from 6'-0" to 40'-0" are available. This limits waste and gives a precise fit on each project.
1" Type HD Form Deck
Type HD Form Deck is heavy-duty formwork for concrete in floors and roofs, with strong support and durability. It comes in gauges from 26 GA to 20 GA, handling greater loads and longer spans efficiently. The deck meets SDI and ANSI standards, and galvanized finishes (G60 and G90) add corrosion resistance.
Dimensions and profile
| Property | Dimension |
|---|---|
| Profile Depth | 1 inch |
| Coverage Width | 36 inches |
| Rib Spacing | 4 inches (center to center) |
| Rib Height | 1 inch |
Heavy-duty concrete formwork in floors and roofs is where Type HD Form Deck fits best, with a 1-inch rib depth and 36-inch coverage width. Rib spacing is 4 inches (center to center), and the 39-inch overall material width makes for secure overlaps and excellent concrete support. The profile takes on greater loads and reduces material costs, giving strength and durability for demanding projects.
Gauges and thicknesses
| Gauge | Bare steel thickness (in) | Weight (lbs/sq ft) | Typical applications |
|---|---|---|---|
| 26 | 0.0179 | 0.75 | Light-duty concrete formwork, low-load floors. |
| 24 | 0.0239 | 1.0 | Standard floors, light industrial applications. |
| 22 | 0.0299 | 1.25 | Medium-duty floors, parking structures. |
| 20 | 0.0359 | 1.5 | Heavy-duty formwork, bridges, industrial slabs. |
Type HD Form Deck comes in gauges 26, 24, 22, and 20. Gauges 26 and 24 are the lighter, cost-effective choices for standard concrete slabs and moderate spans. For longer spans and heavier concrete loads, such as industrial floors, bridges, and parking structures, gauges 22 and 20 give superior strength and support.
Finishes and coatings
| Finish | Details |
|---|---|
| Galvanized G60 | Zinc coating of 0.6 oz/ft². Recommended for general environments. |
| Galvanized G90 | Zinc coating of 0.9 oz/ft². Ideal for highly corrosive environments. |
| Prime-Painted | Provides a base coat for additional protection or paint adhesion. |
| Bare Steel | Unfinished; typically for indoor use or controlled environments. |
Type HD Form Deck has multiple finish options for durability and long-term performance, including galvanized (G60 and G90) and prime-painted. Galvanized coating resists corrosion well, and G90, with its thicker zinc layer, protects in high-moisture or chemical environments. Prime paint adds a protective base coat. G60 and G90 finishes conform to ASTM A653 specifications.
Material and finish options
High-strength 80 KSI steel is the base of Type HD Deck. A corrosion-resistant galvanized finish meeting SDI/ANSI standards is available, along with a variety of painted finishes for tailored aesthetics and bare steel for custom applications. Each is designed to improve durability and maintain performance in demanding environments.
Custom lengths
Lengths range from 6′-0″ for smaller projects to 40′-0″ for extensive spans on larger ones. Our custom length service is designed around what you specify, for an optimal fit with minimal waste on Melbourne projects and others.
1" Type HD Form Deck features
Our 1" Type HD Form Deck offers heavy-duty load support, efficient concrete bonding, and improved durability. It suits industrial floors, bridge formwork, and other demanding structural applications.
Heavy-Duty Load Support
Type HD Form Deck is engineered for higher concrete loads, which makes it right for projects needing superior strength and stability.
Efficient Concrete Bonding
Its deep profile accommodates thicker concrete slabs, giving better load distribution and lasting performance.
Galvanized or Prime-Painted Finish
Select G60/G90 galvanized or prime-painted finishes for added durability and corrosion resistance.
Cost-Effective Formwork Solution
Parking structures, bridge formwork, and industrial floors are typical heavy-duty uses, and the deck adapts easily to complex construction needs.
Compliance with SDI Standards
Steel Deck Institute (SDI) and ANSI guidelines are met, ensuring quality and code compliance.
Versatile Gauge Options
From 26 GA to 20 GA, there is flexibility to meet specific load requirements and stay durable.
Installation and connections
Installation practices
- Lay the deck perpendicular to the supports.
- Fasten at each support with pins, powder-actuated fasteners, or TEK screws.
- Overlap the sidelaps and secure them with screws at 12" o.c.
Fasteners and attachments
- Pins or powder-actuated fasteners secure the deck to the supports
- #10 TEK screws at 6" o.c. on edges and 12" o.c. for sidelaps
- Sidelaps attached through button punching or #10 TEK screws at 12" o.c.
Confirm the profile, gauge, span, loads and connections against your project drawings and the applicable product load tables before ordering.
Applications
Heavy Industrial Floor Systems
Heavy industrial floors that carry high-load equipment and machinery rely on the strong support of Type HD Form Deck. It keeps performing over time in demanding industrial environments.
Bridge and Highway Formwork
Permanent formwork on bridge and highway projects is a common role for Type HD Form Deck. It supports heavy concrete loads as the concrete is placed and adds lasting strength to the structure.
Standards and product documentation
Type HD Form Deck complies with SDI (Steel Deck Institute) specifications, supporting high standards of design and performance on Melbourne projects.
1" Type HD Form Deck questions
What is Type HD Form Deck mainly used for?
Mostly as permanent formwork for heavy-duty concrete slabs in industrial floors, bridges, and infrastructure projects. It holds wet concrete during placement and stays in place after curing.
Which gauges does Type HD Form Deck come in?
26 GA, 24 GA, 22 GA, and 20 GA, which cover a range of load capacities and project requirements.
Is temporary shoring needed with Type HD Form Deck?
It can be. Temporary shoring may be required during installation to carry the weight of the deck and wet concrete until the slab has fully cured.
How is Type HD Form Deck usually fastened?
With pins, powder-actuated fasteners, or TEK screws. Sidelaps are secured by button punching or screws at 12" o.c.
Is Type HD Form Deck available in custom lengths in Melbourne?
Yes, from 6'-0" to 40'-0". That keeps material waste low and gives each project a precise fit.
Type BI Inverted Form Deck
Exposed-soffit architectural ceilings call for Type B Inverted Form Deck, which also acts as permanent formwork for concrete slabs in floor and roof systems. Gauges range from 22 GA through 16 GA. Schools, offices, and commercial facilities in Melbourne are among its common uses.
Dimensions and profile
| Property | Dimension |
|---|---|
| Profile Depth | 1.5 inches |
| Coverage Width | 36 inches |
| Rib Spacing | 6 inches (center to center) |
| Rib Height | 1.5 inches |
Rib depth is 1.5 inches and standard coverage width is 36 inches on Type BI Inverted Form Deck. Install it with the ribs pointing upward and a smooth flat soffit remains exposed underneath, producing an architectural ceiling with no additional finishes. Ribs are 6 inches apart (center to center), which preserves structural integrity while allowing for concrete placement.
Gauges and thicknesses
| Gauge | Bare steel thickness (in) | Weight (lbs/sq ft) | Typical applications |
|---|---|---|---|
| 22 | 0.0299 | 1.25 | Light-duty floors and ceilings. |
| 20 | 0.0358 | 1.5 | Standard commercial floor systems. |
| 18 | 0.0474 | 2.6 | Heavy-duty applications, parking structures. |
| 16 | 0.0598 | 3.0 | Heavy load industrial floors. |
The gauge lineup for Type BI Inverted Form Deck is 22, 20, 18, and 16. Standard commercial applications suit the lighter gauges (22 and 20). When you need more strength for parking structures or heavy industrial floor systems, use gauges 18 and 16.
Finishes and coatings
| Finish | Details |
|---|---|
| Galvanized G60 | Zinc coating of 0.6 oz/ft². Recommended for general environments. |
| Galvanized G90 | Zinc coating of 0.9 oz/ft². Ideal for highly corrosive environments. |
| Prime-Painted | Provides a base coat for additional protection or paint adhesion. |
| Bare Steel | Unfinished; typically for indoor use or controlled environments. |
Type BI Inverted Form Deck ships in galvanized (G60 and G90) and prime-painted finishes. Galvanized coatings give corrosion resistance, and G90 gives extra protection in highly corrosive environments. G60 and G90 finishes conform to ASTM A653 specifications.
Material and finish options
Specify Type BI Inverted Form Deck in high-strength steel with a corrosion-resistant galvanized finish that meets ANSI/SDI standards. Painted finishes are available for tailored aesthetics, and bare steel is available for custom applications. Durability and steady performance are the goals behind each finish.
Custom lengths
Lengths begin at 6′-0″ for smaller projects and extend to 40′-0″ for larger ones. We supply the dimensions you specify, so the deck fits well and offcuts stay minimal.
Type BI Inverted Form Deck features
Choose Type BI Inverted Form Deck for strong structure, efficient formwork, and corrosion-resistant finishes. It is well matched to architectural ceilings, multi-level parking structures, and commercial floor systems with exposed soffits.
High Structural Strength
Supports concrete and live loads while presenting an architecturally finished ceiling surface from below.
Efficient Formwork
Permanent formwork for concrete slabs means less labor and shorter construction time, since there are no temporary forms to strip.
Corrosion Resistance
Durable corrosion resistance in commercial settings comes from G60/G90 galvanized or prime-painted finishes.
Cost-Effective
Formwork and structural support in a single product trim material and labor costs on exposed ceiling work.
Compliance with Standards
Built to SDI and ANSI guidelines, giving quality and code compliance in every application.
Versatile Options
Several gauges (22–16 GA) and finishes address varied load requirements and architectural specifications.
Installation and connections
Installation practices
- Install the deck with ribs facing up, perpendicular to the supports.
- Fasten at every support with pins, powder-actuated fasteners, or TEK screws.
- Overlap sidelaps and fasten with button punching or screws at 12" o.c.
Fasteners and attachments
- Deck is secured to supports with pins or powder-actuated fasteners
- #10 TEK screws at 6" o.c. on edges
- Sidelaps are attached with button punching or #10 TEK screws at 12" o.c.
Confirm the profile, gauge, span, loads and connections against your project drawings and the applicable product load tables before ordering.
Applications
Industrial Flooring with Exposed Ceiling
Industrial floor systems get strong support, and the soffit below is architecturally finished and exposed. It is a good match for schools, offices, and civic buildings.
Multi-Level Parking Structures
Parking garage construction commonly uses it. It supplies permanent formwork and leaves a clean exposed underside, which reduces finishing costs.
Standards and product documentation
Type BI Inverted Form Deck complies with SDI (Steel Deck Institute) specifications and ANSI standards, which keeps design and performance standards high for projects in Melbourne.
Type BI Inverted Form Deck questions
Which projects use Type BI inverted form deck?
It appears in architectural ceiling systems, multi-level parking structures, schools, offices, and facilities needing an attractive exposed soffit.
What is different about installing Type BI?
The deck is installed inverted, ribs up, so the flat side faces down as a finished ceiling surface and needs no added finishing materials.
What gauge options exist?
Gauges 22, 20, 18, and 16 GA cover a range of structural requirements.
What finish options are there?
Corrosion resistance comes from G60 and G90 galvanized finishes, and prime-painted finishes add protection.
Does Type BI come in custom lengths for Melbourne jobs?
Yes, from 6'-0" to 40'-0", so each project gets a precise fit with minimal waste.
Planning your order
Steel Deck supply for Melbourne
Send your project drawings or material list so our team can review quantities, profile requirements and cut lengths. We can help with takeoffs and shop drawings, then confirm pricing and delivery options for your Melbourne project.
Send your drawings for a quoteHelpful details for an accurate quote
- The profile, gauge and finish shown in your specifications.
- Quantities and lengths, or the drawings we can take them off from.
- The Melbourne job site address, your target delivery date and any access limits.
- Load tables, attachment details or other documents your engineer specified.
How We Work
We Guide You Through the Process
From manufacturing to delivery, we ensure precision, efficiency, and compliance with industry standards.
Takeoff and Shop Drawings Services
We provide specialized takeoff services for accurate quotations and detailed shop drawings to produce optimized cutting lists for sheets, ensuring efficient execution and waste-free outcomes in your projects.
Manufacture
We manufacture metal decks to SDI and ANSI standards, ensuring strength, durability, and compliance. We provide custom lengths and high-precision fabrication for optimized performance in roof, floor, and form deck applications.
Swift Deliveries & Nationwide Reach
While based in South Florida, we serve clients nationwide, ensuring quality, efficiency, and timely deliveries across the U.S., reflecting our commitment to excellence without boundaries.
Frequently Asked Questions
Where can I get steel deck in Melbourne?
Miami Metal Deck delivers to Melbourne with same-day pickup in Miami Gardens and 1-day delivery to most Florida cities. Call 305-760-2575.
Do you provide shop drawings?
Yes. We offer complete takeoff services, shop drawings, and optimized cutting lists for all steel deck orders.
What steel deck products does Miami Metal Deck sell?
Roof deck (Type B, Vented Type B, Type N), composite floor deck in several profiles, and form deck (Type S, HD, BI). Each is offered in various gauges and galvanized finishes.
Roof deck, composite deck, form deck: how do they differ?
Roof deck is built to support insulation and roofing systems. Composite deck bonds with poured concrete to make a load-bearing floor slab. Form deck is concrete formwork, temporary or permanent.
Which gauges and finishes are available?
Depending on the product type, we stock gauges 16 to 28. Galvanized finishes come in G60 and G90, and custom lengths run from 6 to 40 feet.
Do you help with takeoffs and shop drawings?
We do. Our engineering team offers specialized takeoff services, detailed shop drawings, and optimized cutting lists for accurate quotations and efficient project execution in Melbourne and elsewhere.
What standards do the products follow?
Steel deck products comply with ANSI/SDI standards (RD-2017 for roof deck, C-2017 for composite floor deck, NC-2017 for non-composite form deck), and we are a Steel Deck Institute member.