SDI Member · ANSI/SDI compliant

Metal form deck supplier in Cape Coral

Miami-produced metal form deck in Cape Coral the fundamental support for your project needs.

Steel Deck Institute Member
SDI Member · ANSI/SDI compliant

Metal Form Decks for Cape Coral job sites

General contractors and steel erectors in Cape Coral rely on Miami Metal Deck for Metal Form Decks on projects across Lee County and the Southwest Florida region. Orders for Cape Coral ship from our Miami Gardens facility, with 1-day service to major Florida cities and delivery scheduled around your erection sequence.

Salt air and humidity near the coast in Cape Coral favor heavier zinc coatings such as G90 galvanized. We match the finish to what your drawings call for. Projects in Cape Coral follow the Florida Building Code wind-load requirements, so we work directly from your engineer's deck schedule, gauges and attachment details.

Product guide

Product specifications for your Cape Coral project

Compare profiles, dimensions, material options and applications to prepare your order. Select a product below to explore its technical details.

9/16" Type S Form Deck

Slab construction in floors and roofs relies on Type S Form Deck as permanent formwork, thanks to its strength and straightforward installation. Gauges run from 28 GA to 20 GA, and manufacturing meets SDI and ANSI standards. It is a regular choice for Cape Coral concrete work.

Dimensions and profile

9/16" Type S Form Deck profile dimensions
9/16" Type S Form Deck dimensions
PropertyDimension
Profile Depth9/16 inches
Coverage Width36 inches
Rib Spacing2.57 inches (center to center)
Rib Height9/16 inches

Type S Form Deck has a shallow 9/16-inch rib depth and a standard coverage width of 36 inches, which suits fast concrete slab forming. With ribs spaced 2.57 inches (center to center), it gives a stable forming surface that holds concrete volume down without giving up structural integrity.

Gauges and thicknesses

9/16" Type S Form Deck gauges
GaugeBare steel thickness (in)Weight (lbs/sq ft)Typical applications
280.01490.65Light-duty concrete formwork, low-load applications.
260.01790.75Standard concrete slabs.
240.02391.0Medium-duty floor and roof slabs.
220.02991.25Medium-duty floors, multi-level buildings.
200.03581.5Heavy-duty formwork, bridges.

Five gauges are offered for Type S Form Deck: 28, 26, 24, 22, and 20. Choose 28 or 26 for cost-effective standard concrete slabs. Where spans are longer or concrete loads heavier, as with bridges and industrial floors, gauges 22 and 20 give superior strength.

Finishes and coatings

9/16" Type S Form Deck finishes
FinishDetails
Galvanized G60Zinc coating of 0.6 oz/ft². Recommended for general environments.
Galvanized G90Zinc coating of 0.9 oz/ft². Ideal for highly corrosive environments.
Prime-PaintedProvides a base coat for additional protection or paint adhesion.
Bare SteelUnfinished; typically for indoor use or controlled environments.

Type S Form Deck is supplied galvanized (G60 and G90) or prime-painted. Galvanizing protects against corrosion, and G90 gives extra protection in highly corrosive conditions. G60 and G90 finishes both meet ASTM A653 specifications.

Material and finish options

Our Type S Form Deck is made from high-strength 80 KSI steel. Choose a corrosion-resistant galvanized finish that meets SDI/ANSI standards, one of several painted finishes for a tailored look, or bare steel for custom applications. Every finish is meant to improve durability and keep performance steady in demanding environments.

Custom lengths

From 6′-0″ pieces for smaller projects to spans reaching 40′-0″ for larger construction, we supply the dimensions you need. Our custom length service is set up around your requirements, so the deck fits well and little material is wasted.

9/16" Type S Form Deck features

Type S Form Deck delivers high structural strength, efficient concrete forming, and corrosion-resistant finishes at a sensible price. It adapts well to multi-level buildings, bridges, and tunnels.

High Structural Strength

Engineered for concrete slab support, with strength and stability that hold during and after the pour.

Efficient Concrete Formwork

Fast construction is the draw: this form deck suits slab forming in multi-level buildings, bridges, and tunnels, and it saves labor time and material.

Galvanized or Prime-Painted Finish

Durable, corrosion-resistant G60/G90 galvanized or prime-painted finishes for demanding environments.

Cost-Effective Solution

Its lightweight shallow profile means less concrete and a stable forming surface, which brings down project costs.

Compliance with SDI Standards

Steel Deck Institute (SDI) and ANSI guidelines are met, which ensures quality and code compliance.

Versatile Design Options

Gauges 28 through 20 are offered along with G60/G90 galvanized coatings and custom lengths of 6 to 40 feet.

Installation and connections

Installation practices

  • Place the deck at right angles to the supports.
  • Attach it at every support with pins, powder-actuated fasteners, or TEK screws.
  • Overlap the sidelaps and fasten them with screws at 12" o.c.

Fasteners and attachments

  • Deck is secured to supports with pins or powder-actuated fasteners
  • #10 TEK screws at 6" o.c. on edges and 12" o.c. for sidelaps
  • Sidelaps are attached by button punching or by #10 TEK screws at 12" o.c.

Confirm the profile, gauge, span, loads and connections against your project drawings and the applicable product load tables before ordering.

Applications

Composite Floor Slabs

Composite Floor Slabs

Slab forming in multi-level buildings, bridges, and tunnels is an ideal fit. The shallow rib profile cuts concrete volume and provides an efficient, stable forming surface.

Bridge and Tunnel Formwork

Bridge and Tunnel Formwork

Type S Form Deck sees wide use as permanent concrete formwork in bridge decks and tunnels, where it supports the structure during concrete placement.

Standards and product documentation

Design and performance of Type S Form Deck follow SDI (Steel Deck Institute) specifications and ANSI standards, a point worth noting for any project in Cape Coral.

9/16" Type S Form Deck questions

Why use Type S form deck?

Type S form deck acts as permanent formwork for concrete slabs in floor and roof systems. It gives a stable base while concrete is placed and stays put after curing.

Is form deck the same as composite deck?

No. Form deck serves only as formwork, so the cured concrete slab carries the load independently. Composite deck bonds structurally with the concrete and shares load permanently.

What are the Type S form deck gauge options?

28, 26, 24, 22, and 20 GA, with thickness from 0.0149" to 0.0358".

Which fastening methods work for Type S form deck?

Pins, powder-actuated fasteners, or TEK screws attach the deck. Button punching or #10 TEK screws at 12" o.c. secure the sidelaps.

Does Type S form deck come in custom lengths?

Yes, in lengths from 6'-0" to 40'-0". That reduces waste and fits each project precisely, including work in Cape Coral.

1" Type HD Form Deck

Type HD Form Deck is heavy-duty formwork for concrete in floors and roofs, with strong support and durability. It comes in gauges from 26 GA to 20 GA, handling greater loads and longer spans efficiently. The deck meets SDI and ANSI standards, and galvanized finishes (G60 and G90) add corrosion resistance.

Dimensions and profile

1" Type HD Form Deck profile dimensions
1" Type HD Form Deck dimensions
PropertyDimension
Profile Depth1 inch
Coverage Width36 inches
Rib Spacing4 inches (center to center)
Rib Height1 inch

Type HD Form Deck has a 1-inch rib depth and a standard 36-inch coverage width, a fit for heavy-duty concrete formwork in floors and roofs. Ribs are spaced 4 inches (center to center), and the overall material width of 39 inches gives secure overlaps and solid concrete support. The profile carries greater loads and holds down material costs, which helps on demanding construction projects.

Gauges and thicknesses

1" Type HD Form Deck gauges
GaugeBare steel thickness (in)Weight (lbs/sq ft)Typical applications
260.01790.75Light-duty concrete formwork, low-load floors.
240.02391.0Standard floors, light industrial applications.
220.02991.25Medium-duty floors, parking structures.
200.03591.5Heavy-duty formwork, bridges, industrial slabs.

Type HD Form Deck comes in gauges 26, 24, 22, and 20. Gauges 26 and 24 are the lighter, cost-effective choices for standard concrete slabs and moderate spans. For longer spans and heavier concrete loads, such as industrial floors, bridges, and parking structures, gauges 22 and 20 give superior strength and support.

Finishes and coatings

1" Type HD Form Deck finishes
FinishDetails
Galvanized G60Zinc coating of 0.6 oz/ft². Recommended for general environments.
Galvanized G90Zinc coating of 0.9 oz/ft². Ideal for highly corrosive environments.
Prime-PaintedProvides a base coat for additional protection or paint adhesion.
Bare SteelUnfinished; typically for indoor use or controlled environments.

For durability and long-term performance, Type HD Form Deck is supplied in galvanized (G60 and G90) and prime-painted finishes. Galvanizing gives excellent corrosion resistance, and G90 has a thicker zinc layer to protect in high-moisture or chemical environments. The prime-painted finish adds a protective base coat. G60 and G90 finishes conform to ASTM A653 specifications.

Material and finish options

High-strength 80 KSI steel is the base of Type HD Deck. A corrosion-resistant galvanized finish meeting SDI/ANSI standards is available, along with a variety of painted finishes for tailored aesthetics and bare steel for custom applications. Each is designed to improve durability and maintain performance in demanding environments.

Custom lengths

Whether the job is small and needs 6′-0″ lengths or large and needs spans up to 40′-0″, we can supply it. The custom length service follows your requirements, so the deck fits well and little is wasted. Contractors in Cape Coral can order to the foot.

1" Type HD Form Deck features

The 1" Type HD Form Deck brings heavy-duty load support, efficient concrete bonding, and enhanced durability to your projects. Industrial floors, bridge formwork, and other demanding structural applications are where it excels.

Heavy-Duty Load Support

Higher concrete loads are what Type HD Form Deck is engineered for, making it ideal when superior strength and stability matter.

Efficient Concrete Bonding

The deep profile carries thicker concrete slabs, which spreads load better and supports long-term performance.

Galvanized or Prime-Painted Finish

G60/G90 galvanized or prime-painted finishes are available for durability and corrosion resistance.

Cost-Effective Formwork Solution

A fit for heavy-duty work such as parking structures, bridge formwork, and industrial floors, and it adapts easily to complex construction needs.

Compliance with SDI Standards

It meets Steel Deck Institute (SDI) and ANSI guidelines, so quality and code compliance are assured.

Versatile Gauge Options

Gauges 26 GA to 20 GA let you meet specific load requirements without losing durability.

Installation and connections

Installation practices

  • Run the deck perpendicular to the supports.
  • At each support, secure the deck with pins, powder-actuated fasteners, or TEK screws.
  • Overlap the sidelaps and fasten with screws at 12" o.c.

Fasteners and attachments

  • Pins or powder-actuated fasteners secure the deck to the supports
  • #10 TEK screws at 6" o.c. on edges and 12" o.c. for sidelaps
  • Sidelaps attached through button punching or #10 TEK screws at 12" o.c.

Confirm the profile, gauge, span, loads and connections against your project drawings and the applicable product load tables before ordering.

Applications

Heavy Industrial Floor Systems

Heavy Industrial Floor Systems

Heavy industrial floors that carry high-load equipment and machinery rely on the strong support of Type HD Form Deck. It keeps performing over time in demanding industrial environments.

Bridge and Highway Formwork

Bridge and Highway Formwork

Permanent formwork on bridge and highway projects is a common role for Type HD Form Deck. It supports heavy concrete loads as the concrete is placed and adds lasting strength to the structure.

Standards and product documentation

Specifications from the SDI (Steel Deck Institute) apply to Type HD Form Deck, supporting high standards of design and performance.

1" Type HD Form Deck questions

What is Type HD Form Deck mainly used for?

Mostly as permanent formwork for heavy-duty concrete slabs in industrial floors, bridges, and infrastructure projects. It holds wet concrete during placement and stays in place after curing.

Which gauges does Type HD Form Deck come in?

26 GA, 24 GA, 22 GA, and 20 GA, which cover a range of load capacities and project requirements.

Is temporary shoring needed with Type HD Form Deck?

It can be. Temporary shoring may be required during installation to carry the weight of the deck and wet concrete until the slab has fully cured.

How is Type HD Form Deck usually fastened?

With pins, powder-actuated fasteners, or TEK screws. Sidelaps are secured by button punching or screws at 12" o.c.

Is Type HD Form Deck available in custom lengths in Cape Coral?

Yes, from 6'-0" to 40'-0". That keeps material waste low and gives each project a precise fit.

Type BI Inverted Form Deck

Architectural ceilings with an exposed soffit are what Type B Inverted Form Deck is designed for. It works as permanent formwork for concrete slabs in floors and roofs, in gauges 22 GA through 16 GA, and is a natural fit for Cape Coral commercial and institutional buildings.

Dimensions and profile

Type BI Inverted Form Deck profile dimensions
Type BI Inverted Form Deck dimensions
PropertyDimension
Profile Depth1.5 inches
Coverage Width36 inches
Rib Spacing6 inches (center to center)
Rib Height1.5 inches

Rib depth is 1.5 inches and standard coverage width is 36 inches on Type BI Inverted Form Deck. Install it with the ribs pointing upward and a smooth flat soffit remains exposed underneath, producing an architectural ceiling with no additional finishes. Ribs are 6 inches apart (center to center), which preserves structural integrity while allowing for concrete placement.

Gauges and thicknesses

Type BI Inverted Form Deck gauges
GaugeBare steel thickness (in)Weight (lbs/sq ft)Typical applications
220.02991.25Light-duty floors and ceilings.
200.03581.5Standard commercial floor systems.
180.04742.6Heavy-duty applications, parking structures.
160.05983.0Heavy load industrial floors.

The gauge lineup for Type BI Inverted Form Deck is 22, 20, 18, and 16. Standard commercial applications suit the lighter gauges (22 and 20). When you need more strength for parking structures or heavy industrial floor systems, use gauges 18 and 16.

Finishes and coatings

Type BI Inverted Form Deck finishes
FinishDetails
Galvanized G60Zinc coating of 0.6 oz/ft². Recommended for general environments.
Galvanized G90Zinc coating of 0.9 oz/ft². Ideal for highly corrosive environments.
Prime-PaintedProvides a base coat for additional protection or paint adhesion.
Bare SteelUnfinished; typically for indoor use or controlled environments.

Galvanized (G60 and G90) and prime-painted finishes are available for Type BI Inverted Form Deck. Galvanizing resists corrosion, and G90 adds protection in highly corrosive environments. G60 and G90 finishes conform to ASTM A653.

Material and finish options

High-strength steel makes up our Type BI Inverted Form Deck. Order it galvanized for corrosion resistance to ANSI/SDI standards, with one of many painted finishes for tailored aesthetics, or as bare steel when the application is custom. Every finish aims to build durability and sustain performance.

Custom lengths

We cut deck from 6′-0″ for smaller projects up to 40′-0″ for larger constructions. Our custom length service follows your requirements to deliver an optimal fit with minimal waste, whatever the size of the job in Cape Coral.

Type BI Inverted Form Deck features

Type BI Inverted Form Deck brings high structural strength, efficient formwork, and corrosion-resistant finishes to architectural ceilings, multi-level parking structures, and commercial floor systems that require exposed soffits.

High Structural Strength

Carries concrete and live loads and also gives you a finished, exposed ceiling surface.

Efficient Formwork

As permanent formwork for concrete slabs, it saves labor and construction time because no temporary forms need to be removed.

Corrosion Resistance

G60/G90 galvanized or prime-painted finishes hold up against corrosion in commercial environments.

Cost-Effective

One product handles both formwork and structural support, which lowers material and labor costs for exposed ceilings.

Compliance with Standards

SDI and ANSI guidelines are met, so quality and code compliance carry across applications.

Versatile Options

A choice of gauges (22–16 GA) and finishes covers different load requirements and architectural specifications.

Installation and connections

Installation practices

  • Install the deck with ribs facing up, perpendicular to the supports.
  • Fasten at every support with pins, powder-actuated fasteners, or TEK screws.
  • Overlap sidelaps and fasten with button punching or screws at 12" o.c.

Fasteners and attachments

  • Deck is secured to supports with pins or powder-actuated fasteners
  • #10 TEK screws at 6" o.c. on edges
  • Sidelaps are attached with button punching or #10 TEK screws at 12" o.c.

Confirm the profile, gauge, span, loads and connections against your project drawings and the applicable product load tables before ordering.

Applications

Industrial Flooring with Exposed Ceiling

Industrial Flooring with Exposed Ceiling

Industrial floor systems gain strong support, and the architecturally finished exposed soffit makes it ideal for schools, offices, and civic buildings.

Multi-Level Parking Structures

Multi-Level Parking Structures

Parking garages often use it for permanent formwork with a clean exposed underside, which lowers finishing costs.

Standards and product documentation

SDI (Steel Deck Institute) specifications and ANSI standards apply to Type BI Inverted Form Deck, which supports high standards of design and performance.

Type BI Inverted Form Deck questions

Where is Type BI inverted form deck used?

Typical uses are architectural ceiling systems, multi-level parking structures, schools, offices, and other facilities that need an attractive exposed soffit.

What makes Type BI installation different from standard form deck?

It goes in inverted, with ribs pointing upward. The flat side then faces down as a finished ceiling, so no extra finishing materials are needed.

Which gauges are offered?

Gauges 22, 20, 18, and 16 GA, so you can match different structural requirements.

Which finishes can I choose?

G60 and G90 galvanized finishes give corrosion resistance, and prime-painted finishes add protection.

Is Type BI available in custom lengths for Cape Coral projects?

Yes. Custom lengths from 6'-0" to 40'-0" give a precise fit with little waste.

Ordering made simple

Metal Form Decks for Cape Coral construction

Start with your plans or a takeoff. We review the profile, gauge, quantities and lengths, help with shop drawings when you need them, and come back with pricing and a delivery plan for Cape Coral.

Send your project requirements

Helpful details for an accurate quote

  • Product profile or series, dimensions, gauge and specified finish.
  • Required quantities, sheet or member lengths, and project drawings.
  • Project address in Cape Coral, delivery date and site access requirements.
  • Any specified load tables, connection details or supporting documentation.

How We Work

We Guide You Through the Process

From manufacturing to delivery, we ensure precision, efficiency, and compliance with industry standards.

01
01

Takeoff and Shop Drawings Services

We provide specialized takeoff services for accurate quotations and detailed shop drawings to produce optimized cutting lists for sheets, ensuring efficient execution and waste-free outcomes in your projects.

02
02

Manufacture

We manufacture metal decks to SDI and ANSI standards, ensuring strength, durability, and compliance. We provide custom lengths and high-precision fabrication for optimized performance in roof, floor, and form deck applications.

03
03

Swift Deliveries & Nationwide Reach

While based in South Florida, we serve clients nationwide, ensuring quality, efficiency, and timely deliveries across the U.S., reflecting our commitment to excellence without boundaries.

Frequently Asked Questions

Do you supply form deck in Cape Coral?

Yes. We deliver form deck to Cape Coral with same-day or next-day service. Call 305-760-2575 for availability.

What is the difference between form deck and composite deck?

Form deck acts as temporary or permanent formwork the concrete carries the load after curing. Composite deck bonds structurally with the concrete to share load permanently.

Why would a Cape Coral project use form deck?

Form deck works as temporary or permanent structural formwork for concrete slabs. It holds up wet concrete through pouring and curing, giving floor and roof slabs a stable base.

Form deck or composite deck: which is which?

Composite deck is built to bond with concrete and function structurally in the finished slab. Form deck is just formwork, and the cured concrete slab bears the load independently.

Why use form deck on multi-level buildings?

Without temporary wood forms, construction moves faster and less material is wasted. The lightweight, consistent formwork system can also remain in place after curing.

What gauge and finish choices are there?

Gauges 16 to 28 are offered, finished with G60 or G90 galvanizing to resist corrosion. Custom lengths between 6 and 40 feet can be ordered.

Phone

305 760 25 75

E-Mail

info@mmdeck.com

Address

16000 NW 49th Ave Suite A, Miami Gardens, FL 33014

Get a Free Quote