SDI Member · ANSI/SDI compliant

Metal form deck supplier in Palm Bay

Miami-produced metal form deck in Palm Bay the fundamental support for your project needs.

Steel Deck Institute Member
SDI Member · ANSI/SDI compliant

Metal Form Decks for Palm Bay job sites

General contractors and steel erectors in Palm Bay rely on Miami Metal Deck for Metal Form Decks on projects across Brevard County and the Space & Treasure Coasts region. Orders for Palm Bay ship from our Miami Gardens facility, with 1-day service to major Florida cities and delivery scheduled around your erection sequence.

With Palm Bay's coastal humidity and salt air, many engineers specify a G90 galvanized finish for its heavier zinc coating; we confirm the finish against your project specifications. Projects in Palm Bay follow the Florida Building Code wind-load requirements, so we work directly from your engineer's deck schedule, gauges and attachment details.

Product guide

Product specifications for your Palm Bay project

Compare profiles, dimensions, material options and applications to prepare your order. Select a product below to explore its technical details.

9/16" Type S Form Deck

Type S Form Deck serves as permanent formwork under concrete slabs in floors and roofs. Its strength and simple installation make it a common pick, and it is available in Palm Bay in gauges 28 GA to 20 GA, produced in line with SDI and ANSI standards.

Dimensions and profile

9/16" Type S Form Deck profile dimensions
9/16" Type S Form Deck dimensions
PropertyDimension
Profile Depth9/16 inches
Coverage Width36 inches
Rib Spacing2.57 inches (center to center)
Rib Height9/16 inches

Type S Form Deck has a shallow 9/16-inch rib depth and a standard coverage width of 36 inches, which suits fast concrete slab forming. With ribs spaced 2.57 inches (center to center), it gives a stable forming surface that holds concrete volume down without giving up structural integrity.

Gauges and thicknesses

9/16" Type S Form Deck gauges
GaugeBare steel thickness (in)Weight (lbs/sq ft)Typical applications
280.01490.65Light-duty concrete formwork, low-load applications.
260.01790.75Standard concrete slabs.
240.02391.0Medium-duty floor and roof slabs.
220.02991.25Medium-duty floors, multi-level buildings.
200.03581.5Heavy-duty formwork, bridges.

You can specify Type S Form Deck in gauges 28, 26, 24, 22, and 20. The lighter gauges (28 and 26) are an economical fit for standard concrete slabs. For longer spans and heavier concrete loads, such as bridges and industrial floors, step up to the heavier gauges (22 and 20).

Finishes and coatings

9/16" Type S Form Deck finishes
FinishDetails
Galvanized G60Zinc coating of 0.6 oz/ft². Recommended for general environments.
Galvanized G90Zinc coating of 0.9 oz/ft². Ideal for highly corrosive environments.
Prime-PaintedProvides a base coat for additional protection or paint adhesion.
Bare SteelUnfinished; typically for indoor use or controlled environments.

Type S Form Deck is supplied galvanized (G60 and G90) or prime-painted. Galvanizing protects against corrosion, and G90 gives extra protection in highly corrosive conditions. G60 and G90 finishes both meet ASTM A653 specifications.

Material and finish options

Type S Form Deck uses high-strength 80 KSI steel and ships with a corrosion-resistant galvanized finish that meets SDI/ANSI standards. Painted finishes are offered for tailored aesthetics, and bare steel is available for custom applications. Each option is intended to extend durability and sustain performance in demanding environments.

Custom lengths

Smaller projects can use deck as short as 6′-0″, and larger constructions can take lengths up to 40′-0″. Tell us what your Palm Bay project needs and we will cut to it, aiming for the best fit with minimal waste.

9/16" Type S Form Deck features

Type S Form Deck pairs high structural strength with efficient concrete forming and corrosion-resistant finishes. It is an economical, flexible choice for multi-level buildings, bridges, and tunnel construction.

High Structural Strength

Engineered for concrete slab support, with strength and stability that hold during and after the pour.

Efficient Concrete Formwork

Fast construction is the draw: this form deck suits slab forming in multi-level buildings, bridges, and tunnels, and it saves labor time and material.

Galvanized or Prime-Painted Finish

Durable, corrosion-resistant G60/G90 galvanized or prime-painted finishes for demanding environments.

Cost-Effective Solution

Its lightweight shallow profile means less concrete and a stable forming surface, which brings down project costs.

Compliance with SDI Standards

Steel Deck Institute (SDI) and ANSI guidelines are met, which ensures quality and code compliance.

Versatile Design Options

Gauges 28 through 20 are offered along with G60/G90 galvanized coatings and custom lengths of 6 to 40 feet.

Installation and connections

Installation practices

  • Run the deck perpendicular to the supports.
  • Secure it to each support using pins, powder-actuated fasteners, or TEK screws.
  • Lap the sidelaps, then fasten with screws at 12" o.c.

Fasteners and attachments

  • Pins or powder-actuated fasteners secure the deck to the supports
  • #10 TEK screws at 6" o.c. on edges and 12" o.c. for sidelaps
  • Sidelaps fastened by button punching or #10 TEK screws at 12" o.c.

Confirm the profile, gauge, span, loads and connections against your project drawings and the applicable product load tables before ordering.

Applications

Composite Floor Slabs

Composite Floor Slabs

Well suited to forming slabs in multi-level buildings, bridges, and tunnels. A shallow rib profile keeps concrete volume down and gives a stable, efficient surface to pour on.

Bridge and Tunnel Formwork

Bridge and Tunnel Formwork

Permanent concrete formwork for bridge decks and tunnel construction is a widespread use for Type S Form Deck, which supplies structural support as concrete goes in.

Standards and product documentation

Design and performance of Type S Form Deck follow SDI (Steel Deck Institute) specifications and ANSI standards, a point worth noting for any project in Palm Bay.

9/16" Type S Form Deck questions

What is Type S form deck used for?

It is permanent formwork for concrete slabs in floor and roof systems. It gives a stable base while concrete is placed and stays in place once the concrete has cured.

How does form deck differ from composite deck?

Form deck is only formwork, and the cured concrete slab carries the load on its own. Composite deck bonds structurally with the concrete, so the two share the load permanently.

Which gauges does Type S form deck come in?

Gauges 28, 26, 24, 22, and 20 GA, with thicknesses from 0.0149" to 0.0358".

How should Type S form deck be fastened?

Use pins, powder-actuated fasteners, or TEK screws. Sidelaps are secured by button punching or #10 TEK screws at 12" o.c.

Is custom-length Type S form deck available in Palm Bay?

Yes. Custom lengths run from 6'-0" to 40'-0", which cuts material waste and gives each project a precise fit.

1" Type HD Form Deck

Heavy-duty concrete formwork in floors and roofs is the purpose of Type HD Form Deck, which delivers strong support and durability. Gauges run from 26 GA to 20 GA, so it copes with greater loads and longer spans. SDI and ANSI standards apply, and galvanized finishes such as G60 and G90 improve corrosion resistance for Palm Bay projects.

Dimensions and profile

1" Type HD Form Deck profile dimensions
1" Type HD Form Deck dimensions
PropertyDimension
Profile Depth1 inch
Coverage Width36 inches
Rib Spacing4 inches (center to center)
Rib Height1 inch

Heavy-duty concrete formwork in floors and roofs is where Type HD Form Deck fits best, with a 1-inch rib depth and 36-inch coverage width. Rib spacing is 4 inches (center to center), and the 39-inch overall material width makes for secure overlaps and excellent concrete support. The profile takes on greater loads and reduces material costs, giving strength and durability for demanding projects.

Gauges and thicknesses

1" Type HD Form Deck gauges
GaugeBare steel thickness (in)Weight (lbs/sq ft)Typical applications
260.01790.75Light-duty concrete formwork, low-load floors.
240.02391.0Standard floors, light industrial applications.
220.02991.25Medium-duty floors, parking structures.
200.03591.5Heavy-duty formwork, bridges, industrial slabs.

Type HD Form Deck comes in gauges 26, 24, 22, and 20. Gauges 26 and 24 are the lighter, cost-effective choices for standard concrete slabs and moderate spans. For longer spans and heavier concrete loads, such as industrial floors, bridges, and parking structures, gauges 22 and 20 give superior strength and support.

Finishes and coatings

1" Type HD Form Deck finishes
FinishDetails
Galvanized G60Zinc coating of 0.6 oz/ft². Recommended for general environments.
Galvanized G90Zinc coating of 0.9 oz/ft². Ideal for highly corrosive environments.
Prime-PaintedProvides a base coat for additional protection or paint adhesion.
Bare SteelUnfinished; typically for indoor use or controlled environments.

Type HD Form Deck is offered in several finishes for long-term durability: galvanized (G60 and G90) and prime-painted. Galvanizing provides excellent corrosion resistance, and G90 carries a thicker zinc layer for high-moisture or chemical environments. A prime-painted finish adds a protective base coat. G60 and G90 finishes conform to ASTM A653 specifications.

Material and finish options

High-strength 80 KSI steel is the base of Type HD Deck. A corrosion-resistant galvanized finish meeting SDI/ANSI standards is available, along with a variety of painted finishes for tailored aesthetics and bare steel for custom applications. Each is designed to improve durability and maintain performance in demanding environments.

Custom lengths

Lengths range from 6′-0″ for smaller projects to 40′-0″ for extensive spans on larger ones. Our custom length service is designed around what you specify, for an optimal fit with minimal waste on Palm Bay projects and others.

1" Type HD Form Deck features

Our 1" Type HD Form Deck offers heavy-duty load support, efficient concrete bonding, and improved durability. It suits industrial floors, bridge formwork, and other demanding structural applications.

Heavy-Duty Load Support

Type HD Form Deck is engineered for higher concrete loads, which makes it right for projects needing superior strength and stability.

Efficient Concrete Bonding

Its deep profile accommodates thicker concrete slabs, giving better load distribution and lasting performance.

Galvanized or Prime-Painted Finish

Select G60/G90 galvanized or prime-painted finishes for added durability and corrosion resistance.

Cost-Effective Formwork Solution

Parking structures, bridge formwork, and industrial floors are typical heavy-duty uses, and the deck adapts easily to complex construction needs.

Compliance with SDI Standards

Steel Deck Institute (SDI) and ANSI guidelines are met, ensuring quality and code compliance.

Versatile Gauge Options

From 26 GA to 20 GA, there is flexibility to meet specific load requirements and stay durable.

Installation and connections

Installation practices

  • Run the deck perpendicular to the supports.
  • At each support, secure the deck with pins, powder-actuated fasteners, or TEK screws.
  • Overlap the sidelaps and fasten with screws at 12" o.c.

Fasteners and attachments

  • Pins or powder-actuated fasteners secure the deck to the supports
  • #10 TEK screws at 6" o.c. on edges and 12" o.c. for sidelaps
  • Sidelaps attached through button punching or #10 TEK screws at 12" o.c.

Confirm the profile, gauge, span, loads and connections against your project drawings and the applicable product load tables before ordering.

Applications

Heavy Industrial Floor Systems

Heavy Industrial Floor Systems

High-load equipment and machinery on heavy industrial floors get strong support from Type HD Form Deck. The durable design performs over the long term in demanding industrial settings.

Bridge and Highway Formwork

Bridge and Highway Formwork

Bridge and highway construction commonly uses Type HD Form Deck as permanent formwork, where it supports heavy concrete loads during placement and adds lasting strength.

Standards and product documentation

Type HD Form Deck complies with SDI (Steel Deck Institute) specifications, supporting high standards of design and performance on Palm Bay projects.

1" Type HD Form Deck questions

What is Type HD Form Deck mainly used for?

Mostly as permanent formwork for heavy-duty concrete slabs in industrial floors, bridges, and infrastructure projects. It holds wet concrete during placement and stays in place after curing.

Which gauges does Type HD Form Deck come in?

26 GA, 24 GA, 22 GA, and 20 GA, which cover a range of load capacities and project requirements.

Is temporary shoring needed with Type HD Form Deck?

It can be. Temporary shoring may be required during installation to carry the weight of the deck and wet concrete until the slab has fully cured.

How is Type HD Form Deck usually fastened?

With pins, powder-actuated fasteners, or TEK screws. Sidelaps are secured by button punching or screws at 12" o.c.

Is Type HD Form Deck available in custom lengths in Palm Bay?

Yes, from 6'-0" to 40'-0". That keeps material waste low and gives each project a precise fit.

Type BI Inverted Form Deck

Architectural ceilings with an exposed soffit are what Type B Inverted Form Deck is designed for. It works as permanent formwork for concrete slabs in floors and roofs, in gauges 22 GA through 16 GA, and is a natural fit for Palm Bay commercial and institutional buildings.

Dimensions and profile

Type BI Inverted Form Deck profile dimensions
Type BI Inverted Form Deck dimensions
PropertyDimension
Profile Depth1.5 inches
Coverage Width36 inches
Rib Spacing6 inches (center to center)
Rib Height1.5 inches

Rib depth on Type BI Inverted Form Deck is 1.5 inches, and standard coverage width is 36 inches. The ribs point up when installed, which leaves a smooth flat soffit below that serves as an architectural ceiling without further finishes. A 6-inch rib spacing (center to center) maintains structural integrity and allows for concrete placement.

Gauges and thicknesses

Type BI Inverted Form Deck gauges
GaugeBare steel thickness (in)Weight (lbs/sq ft)Typical applications
220.02991.25Light-duty floors and ceilings.
200.03581.5Standard commercial floor systems.
180.04742.6Heavy-duty applications, parking structures.
160.05983.0Heavy load industrial floors.

Gauges 22, 20, 18, and 16 are offered for Type BI Inverted Form Deck. For standard commercial work, the lighter gauges (22 and 20) are a good fit. Parking structures and heavy industrial floor systems call for the added strength of gauges 18 and 16.

Finishes and coatings

Type BI Inverted Form Deck finishes
FinishDetails
Galvanized G60Zinc coating of 0.6 oz/ft². Recommended for general environments.
Galvanized G90Zinc coating of 0.9 oz/ft². Ideal for highly corrosive environments.
Prime-PaintedProvides a base coat for additional protection or paint adhesion.
Bare SteelUnfinished; typically for indoor use or controlled environments.

Galvanized (G60 and G90) and prime-painted finishes are available for Type BI Inverted Form Deck. Galvanizing resists corrosion, and G90 adds protection in highly corrosive environments. G60 and G90 finishes conform to ASTM A653.

Material and finish options

Specify Type BI Inverted Form Deck in high-strength steel with a corrosion-resistant galvanized finish that meets ANSI/SDI standards. Painted finishes are available for tailored aesthetics, and bare steel is available for custom applications. Durability and steady performance are the goals behind each finish.

Custom lengths

Lengths begin at 6′-0″ for smaller projects and extend to 40′-0″ for larger ones. We supply the dimensions you specify, so the deck fits well and offcuts stay minimal.

Type BI Inverted Form Deck features

Choose Type BI Inverted Form Deck for strong structure, efficient formwork, and corrosion-resistant finishes. It is well matched to architectural ceilings, multi-level parking structures, and commercial floor systems with exposed soffits.

High Structural Strength

Supports concrete and live loads while presenting an architecturally finished ceiling surface from below.

Efficient Formwork

Permanent formwork for concrete slabs means less labor and shorter construction time, since there are no temporary forms to strip.

Corrosion Resistance

Durable corrosion resistance in commercial settings comes from G60/G90 galvanized or prime-painted finishes.

Cost-Effective

Formwork and structural support in a single product trim material and labor costs on exposed ceiling work.

Compliance with Standards

Built to SDI and ANSI guidelines, giving quality and code compliance in every application.

Versatile Options

Several gauges (22–16 GA) and finishes address varied load requirements and architectural specifications.

Installation and connections

Installation practices

  • Set the deck perpendicular to the supports with the ribs pointing upward.
  • Use pins, powder-actuated fasteners, or TEK screws to fasten at each support.
  • Lap sidelaps and secure them at 12" o.c. with button punching or screws.

Fasteners and attachments

  • Pins or powder-actuated fasteners secure the deck to supports
  • #10 TEK screws at 6" o.c. on edges
  • Sidelaps attached through button punching or #10 TEK screws at 12" o.c.

Confirm the profile, gauge, span, loads and connections against your project drawings and the applicable product load tables before ordering.

Applications

Industrial Flooring with Exposed Ceiling

Industrial Flooring with Exposed Ceiling

Strong support for industrial floor systems plus an architecturally finished exposed soffit, which suits schools, offices, and civic buildings.

Multi-Level Parking Structures

Multi-Level Parking Structures

A frequent choice for parking garages, giving permanent formwork and a clean exposed underside that cuts finishing costs.

Standards and product documentation

Type BI Inverted Form Deck complies with SDI (Steel Deck Institute) specifications and ANSI standards, which keeps design and performance standards high for projects in Palm Bay.

Type BI Inverted Form Deck questions

Which projects use Type BI inverted form deck?

It appears in architectural ceiling systems, multi-level parking structures, schools, offices, and facilities needing an attractive exposed soffit.

What is different about installing Type BI?

The deck is installed inverted, ribs up, so the flat side faces down as a finished ceiling surface and needs no added finishing materials.

What gauge options exist?

Gauges 22, 20, 18, and 16 GA cover a range of structural requirements.

What finish options are there?

Corrosion resistance comes from G60 and G90 galvanized finishes, and prime-painted finishes add protection.

Does Type BI come in custom lengths for Palm Bay jobs?

Yes, from 6'-0" to 40'-0", so each project gets a precise fit with minimal waste.

Planning your order

Metal Form Decks supply for Palm Bay

Send your project drawings or material list so our team can review quantities, profile requirements and cut lengths. We can help with takeoffs and shop drawings, then confirm pricing and delivery options for your Palm Bay project.

Send your drawings for a quote

What we need to quote your project

  • The profile, gauge and finish shown in your specifications.
  • Quantities and lengths, or the drawings we can take them off from.
  • The Palm Bay job site address, your target delivery date and any access limits.
  • Load tables, attachment details or other documents your engineer specified.

How We Work

We Guide You Through the Process

From manufacturing to delivery, we ensure precision, efficiency, and compliance with industry standards.

01
01

Takeoff and Shop Drawings Services

We provide specialized takeoff services for accurate quotations and detailed shop drawings to produce optimized cutting lists for sheets, ensuring efficient execution and waste-free outcomes in your projects.

02
02

Manufacture

We manufacture metal decks to SDI and ANSI standards, ensuring strength, durability, and compliance. We provide custom lengths and high-precision fabrication for optimized performance in roof, floor, and form deck applications.

03
03

Swift Deliveries & Nationwide Reach

While based in South Florida, we serve clients nationwide, ensuring quality, efficiency, and timely deliveries across the U.S., reflecting our commitment to excellence without boundaries.

Frequently Asked Questions

Do you supply form deck in Palm Bay?

Yes. We deliver form deck to Palm Bay with same-day or next-day service. Call 305-760-2575 for availability.

What is the difference between form deck and composite deck?

Form deck acts as temporary or permanent formwork the concrete carries the load after curing. Composite deck bonds structurally with the concrete to share load permanently.

What is form deck for?

Form deck is temporary or permanent structural formwork for concrete slabs. It carries the weight of wet concrete during pouring and curing, giving floor and roof slabs a stable base.

How does form deck compare with composite deck?

Composite deck bonds with concrete and acts as a structural element in the finished slab. Form deck is only formwork, so after curing the concrete slab carries the load on its own.

What benefits does form deck bring to multi-level construction?

It speeds up construction by removing the need for temporary wood forms and cuts material waste. It is also a consistent, lightweight formwork system that can stay in place after the concrete cures.

Which gauges and finishes does form deck come in?

Form deck is offered in gauges 16 to 28, with G60 and G90 galvanized finishes for corrosion resistance. Custom lengths of 6 to 40 feet are available.

Phone

305 760 25 75

E-Mail

info@mmdeck.com

Address

16000 NW 49th Ave Suite A, Miami Gardens, FL 33014

Get a Free Quote