SDI Member · ANSI/SDI compliant
Metal form deck supplier in Lakeland
Miami-produced metal form deck in Lakeland the fundamental support for your project needs.

Metal Form Decks for Lakeland job sites
Builders in Lakeland order Metal Form Decks directly from Miami Metal Deck for commercial and industrial projects throughout Polk County and the Central Florida region. Deliveries to Lakeland leave our Miami Gardens facility on a schedule set with your team, with 1-day service available to major Florida cities.
For inland Lakeland projects, G60 galvanized is often sufficient for enclosed structures, while G90 remains available where the specifications call for more corrosion protection. Projects in Lakeland follow the Florida Building Code wind-load requirements, so we work directly from your engineer's deck schedule, gauges and attachment details.
Product guide
Product specifications for your Lakeland project
Compare profiles, dimensions, material options and applications to prepare your order. Select a product below to explore its technical details.
9/16" Type S Form Deck
Type S Form Deck serves as permanent formwork under concrete slabs in floors and roofs. Its strength and simple installation make it a common pick, and it is available in Lakeland in gauges 28 GA to 20 GA, produced in line with SDI and ANSI standards.
Dimensions and profile

| Property | Dimension |
|---|---|
| Profile Depth | 9/16 inches |
| Coverage Width | 36 inches |
| Rib Spacing | 2.57 inches (center to center) |
| Rib Height | 9/16 inches |
Rapid slab forming is the strength of Type S Form Deck: a shallow 9/16-inch rib depth and a standard 36-inch coverage width. The 2.57-inch rib spacing (center to center) creates a stable forming surface that minimizes concrete volume and maintains structural integrity.
Gauges and thicknesses
| Gauge | Bare steel thickness (in) | Weight (lbs/sq ft) | Typical applications |
|---|---|---|---|
| 28 | 0.0149 | 0.65 | Light-duty concrete formwork, low-load applications. |
| 26 | 0.0179 | 0.75 | Standard concrete slabs. |
| 24 | 0.0239 | 1.0 | Medium-duty floor and roof slabs. |
| 22 | 0.0299 | 1.25 | Medium-duty floors, multi-level buildings. |
| 20 | 0.0358 | 1.5 | Heavy-duty formwork, bridges. |
You can specify Type S Form Deck in gauges 28, 26, 24, 22, and 20. The lighter gauges (28 and 26) are an economical fit for standard concrete slabs. For longer spans and heavier concrete loads, such as bridges and industrial floors, step up to the heavier gauges (22 and 20).
Finishes and coatings
| Finish | Details |
|---|---|
| Galvanized G60 | Zinc coating of 0.6 oz/ft². Recommended for general environments. |
| Galvanized G90 | Zinc coating of 0.9 oz/ft². Ideal for highly corrosive environments. |
| Prime-Painted | Provides a base coat for additional protection or paint adhesion. |
| Bare Steel | Unfinished; typically for indoor use or controlled environments. |
Galvanized (G60 and G90) and prime-painted finishes are available on Type S Form Deck. Corrosion resistance comes from the galvanized coating, with G90 providing more protection in highly corrosive environments. G60 and G90 finishes conform to ASTM A653.
Material and finish options
Our Type S Form Deck is made from high-strength 80 KSI steel. Choose a corrosion-resistant galvanized finish that meets SDI/ANSI standards, one of several painted finishes for a tailored look, or bare steel for custom applications. Every finish is meant to improve durability and keep performance steady in demanding environments.
Custom lengths
From 6′-0″ pieces for smaller projects to spans reaching 40′-0″ for larger construction, we supply the dimensions you need. Our custom length service is set up around your requirements, so the deck fits well and little material is wasted.
9/16" Type S Form Deck features
Type S Form Deck delivers high structural strength, efficient concrete forming, and corrosion-resistant finishes at a sensible price. It adapts well to multi-level buildings, bridges, and tunnels.
High Structural Strength
Designed to support concrete slabs, giving stability and structural strength during and after concrete placement.
Efficient Concrete Formwork
This quick-to-build form deck suits slab forming in multi-level buildings, bridges, and tunnels, and it reduces labor time and material costs.
Galvanized or Prime-Painted Finish
G60/G90 galvanized or prime-painted finishes add durability and corrosion resistance where conditions are demanding.
Cost-Effective Solution
A lightweight, shallow profile limits concrete use while offering a stable forming surface, so overall project costs drop.
Compliance with SDI Standards
Conforms to Steel Deck Institute (SDI) and ANSI guidelines, supporting quality and code compliance.
Versatile Design Options
Gauges 28 through 20, G60/G90 galvanized coatings, and custom lengths between 6 and 40 feet.
Installation and connections
Installation practices
- Run the deck perpendicular to the supports.
- Secure it to each support using pins, powder-actuated fasteners, or TEK screws.
- Lap the sidelaps, then fasten with screws at 12" o.c.
Fasteners and attachments
- Pins or powder-actuated fasteners secure the deck to the supports
- #10 TEK screws at 6" o.c. on edges and 12" o.c. for sidelaps
- Sidelaps fastened by button punching or #10 TEK screws at 12" o.c.
Confirm the profile, gauge, span, loads and connections against your project drawings and the applicable product load tables before ordering.
Applications

Composite Floor Slabs
Slab forming in multi-level buildings, bridges, and tunnels is an ideal fit. The shallow rib profile cuts concrete volume and provides an efficient, stable forming surface.

Bridge and Tunnel Formwork
Type S Form Deck sees wide use as permanent concrete formwork in bridge decks and tunnels, where it supports the structure during concrete placement.
Standards and product documentation
Design and performance of Type S Form Deck follow SDI (Steel Deck Institute) specifications and ANSI standards, a point worth noting for any project in Lakeland.
9/16" Type S Form Deck questions
What does Type S form deck do?
Type S form deck is permanent formwork for concrete slabs in floor and roof systems. It provides a stable base during the pour and remains in place after the concrete cures.
What separates form deck from composite deck?
Form deck is just formwork, and after curing the concrete slab bears the load by itself. Composite deck bonds with the concrete structurally and shares the load for good.
What gauges can I order in Type S form deck?
Choose from 28, 26, 24, 22, and 20 GA, with thickness from 0.0149" up to 0.0358".
What are the recommended fastening methods?
Pins, powder-actuated fasteners, or TEK screws attach Type S Form Deck. For sidelaps, use button punching or #10 TEK screws at 12" o.c.
Can Lakeland projects get Type S form deck in custom lengths?
Yes, lengths from 6'-0" to 40'-0" are available. This limits waste and gives a precise fit on each project.
1" Type HD Form Deck
Heavy-duty concrete formwork in floors and roofs is the purpose of Type HD Form Deck, which delivers strong support and durability. Gauges run from 26 GA to 20 GA, so it copes with greater loads and longer spans. SDI and ANSI standards apply, and galvanized finishes such as G60 and G90 improve corrosion resistance for Lakeland projects.
Dimensions and profile

| Property | Dimension |
|---|---|
| Profile Depth | 1 inch |
| Coverage Width | 36 inches |
| Rib Spacing | 4 inches (center to center) |
| Rib Height | 1 inch |
Heavy-duty concrete formwork in floors and roofs is where Type HD Form Deck fits best, with a 1-inch rib depth and 36-inch coverage width. Rib spacing is 4 inches (center to center), and the 39-inch overall material width makes for secure overlaps and excellent concrete support. The profile takes on greater loads and reduces material costs, giving strength and durability for demanding projects.
Gauges and thicknesses
| Gauge | Bare steel thickness (in) | Weight (lbs/sq ft) | Typical applications |
|---|---|---|---|
| 26 | 0.0179 | 0.75 | Light-duty concrete formwork, low-load floors. |
| 24 | 0.0239 | 1.0 | Standard floors, light industrial applications. |
| 22 | 0.0299 | 1.25 | Medium-duty floors, parking structures. |
| 20 | 0.0359 | 1.5 | Heavy-duty formwork, bridges, industrial slabs. |
Choose from gauges 26, 24, 22, and 20 for Type HD Form Deck. The lighter gauges, 26 and 24, are cost-effective for standard concrete slabs and moderate spans. Gauges 22 and 20 give superior strength and support over longer spans and heavier concrete loads, which makes them right for industrial floors, bridges, and parking structures.
Finishes and coatings
| Finish | Details |
|---|---|
| Galvanized G60 | Zinc coating of 0.6 oz/ft². Recommended for general environments. |
| Galvanized G90 | Zinc coating of 0.9 oz/ft². Ideal for highly corrosive environments. |
| Prime-Painted | Provides a base coat for additional protection or paint adhesion. |
| Bare Steel | Unfinished; typically for indoor use or controlled environments. |
Type HD Form Deck is offered in several finishes for long-term durability: galvanized (G60 and G90) and prime-painted. Galvanizing provides excellent corrosion resistance, and G90 carries a thicker zinc layer for high-moisture or chemical environments. A prime-painted finish adds a protective base coat. G60 and G90 finishes conform to ASTM A653 specifications.
Material and finish options
High-strength 80 KSI steel is the base of Type HD Deck. A corrosion-resistant galvanized finish meeting SDI/ANSI standards is available, along with a variety of painted finishes for tailored aesthetics and bare steel for custom applications. Each is designed to improve durability and maintain performance in demanding environments.
Custom lengths
Whether the job is small and needs 6′-0″ lengths or large and needs spans up to 40′-0″, we can supply it. The custom length service follows your requirements, so the deck fits well and little is wasted. Contractors in Lakeland can order to the foot.
1" Type HD Form Deck features
The 1" Type HD Form Deck brings heavy-duty load support, efficient concrete bonding, and enhanced durability to your projects. Industrial floors, bridge formwork, and other demanding structural applications are where it excels.
Heavy-Duty Load Support
Built for higher concrete loads, the Type HD Form Deck suits projects that demand superior strength and stability.
Efficient Concrete Bonding
A deep profile supports thicker concrete slabs, which improves load distribution and long-term performance.
Galvanized or Prime-Painted Finish
G60/G90 galvanized or prime-painted finishes improve durability and corrosion resistance.
Cost-Effective Formwork Solution
Suited to heavy-duty uses such as parking structures, bridge formwork, and industrial floors, and it adjusts readily to complex construction needs.
Compliance with SDI Standards
Meets Steel Deck Institute (SDI) and ANSI guidelines for quality and code compliance.
Versatile Gauge Options
26 GA to 20 GA are offered, giving flexibility for specific load requirements while keeping durability.
Installation and connections
Installation practices
- Lay the deck perpendicular to the supports.
- Fasten at each support with pins, powder-actuated fasteners, or TEK screws.
- Overlap the sidelaps and secure them with screws at 12" o.c.
Fasteners and attachments
- Deck is fixed to supports with pins or powder-actuated fasteners
- #10 TEK screws at 6" o.c. on edges and 12" o.c. for sidelaps
- Sidelaps joined by button punching or #10 TEK screws at 12" o.c.
Confirm the profile, gauge, span, loads and connections against your project drawings and the applicable product load tables before ordering.
Applications

Heavy Industrial Floor Systems
High-load equipment and machinery on heavy industrial floors get strong support from Type HD Form Deck. The durable design performs over the long term in demanding industrial settings.

Bridge and Highway Formwork
Bridge and highway construction commonly uses Type HD Form Deck as permanent formwork, where it supports heavy concrete loads during placement and adds lasting strength.
Standards and product documentation
Type HD Form Deck is produced to SDI (Steel Deck Institute) specifications, which keeps design and performance standards high.
1" Type HD Form Deck questions
What is Type HD Form Deck mainly used for?
Mostly as permanent formwork for heavy-duty concrete slabs in industrial floors, bridges, and infrastructure projects. It holds wet concrete during placement and stays in place after curing.
Which gauges does Type HD Form Deck come in?
26 GA, 24 GA, 22 GA, and 20 GA, which cover a range of load capacities and project requirements.
Is temporary shoring needed with Type HD Form Deck?
It can be. Temporary shoring may be required during installation to carry the weight of the deck and wet concrete until the slab has fully cured.
How is Type HD Form Deck usually fastened?
With pins, powder-actuated fasteners, or TEK screws. Sidelaps are secured by button punching or screws at 12" o.c.
Is Type HD Form Deck available in custom lengths in Lakeland?
Yes, from 6'-0" to 40'-0". That keeps material waste low and gives each project a precise fit.
Type BI Inverted Form Deck
Type B Inverted Form Deck is permanent formwork for concrete slabs in floor and roof systems, offered in gauges 22 GA through 16 GA. It was designed for architectural ceilings where the soffit stays exposed, and Lakeland schools, offices, and commercial buildings are typical uses.
Dimensions and profile

| Property | Dimension |
|---|---|
| Profile Depth | 1.5 inches |
| Coverage Width | 36 inches |
| Rib Spacing | 6 inches (center to center) |
| Rib Height | 1.5 inches |
Type BI Inverted Form Deck has a 1.5-inch rib depth and a standard 36-inch coverage width. Ribs face upward when it is installed, so a smooth, flat soffit shows below and works as an architectural ceiling with no added finish. Rib spacing of 6 inches (center to center) keeps the structure sound and still accommodates concrete placement.
Gauges and thicknesses
| Gauge | Bare steel thickness (in) | Weight (lbs/sq ft) | Typical applications |
|---|---|---|---|
| 22 | 0.0299 | 1.25 | Light-duty floors and ceilings. |
| 20 | 0.0358 | 1.5 | Standard commercial floor systems. |
| 18 | 0.0474 | 2.6 | Heavy-duty applications, parking structures. |
| 16 | 0.0598 | 3.0 | Heavy load industrial floors. |
The gauge lineup for Type BI Inverted Form Deck is 22, 20, 18, and 16. Standard commercial applications suit the lighter gauges (22 and 20). When you need more strength for parking structures or heavy industrial floor systems, use gauges 18 and 16.
Finishes and coatings
| Finish | Details |
|---|---|
| Galvanized G60 | Zinc coating of 0.6 oz/ft². Recommended for general environments. |
| Galvanized G90 | Zinc coating of 0.9 oz/ft². Ideal for highly corrosive environments. |
| Prime-Painted | Provides a base coat for additional protection or paint adhesion. |
| Bare Steel | Unfinished; typically for indoor use or controlled environments. |
Type BI Inverted Form Deck is offered with galvanized (G60 and G90) and prime-painted finishes. The galvanized coatings protect against corrosion, with G90 extending that protection to highly corrosive environments. G60 and G90 finishes conform to ASTM A653 specifications.
Material and finish options
High-strength steel makes up our Type BI Inverted Form Deck. Order it galvanized for corrosion resistance to ANSI/SDI standards, with one of many painted finishes for tailored aesthetics, or as bare steel when the application is custom. Every finish aims to build durability and sustain performance.
Custom lengths
Lengths begin at 6′-0″ for smaller projects and extend to 40′-0″ for larger ones. We supply the dimensions you specify, so the deck fits well and offcuts stay minimal.
Type BI Inverted Form Deck features
Type BI Inverted Form Deck brings high structural strength, efficient formwork, and corrosion-resistant finishes to architectural ceilings, multi-level parking structures, and commercial floor systems that require exposed soffits.
High Structural Strength
It carries concrete and live loads, and the underside becomes an architecturally finished exposed ceiling.
Efficient Formwork
Because the deck stays in place as permanent formwork for concrete slabs, labor and construction time drop and temporary forms never need removing.
Corrosion Resistance
For lasting corrosion resistance in commercial environments, choose G60/G90 galvanized or prime-painted finishes.
Cost-Effective
By combining formwork with structural support, it lowers material and labor costs where ceilings are left exposed.
Compliance with Standards
Conforms to SDI and ANSI guidelines for quality and code compliance in all applications.
Versatile Options
Gauges from 22 to 16 GA and multiple finishes are available to meet varying load and architectural needs.
Installation and connections
Installation practices
- Install the deck with ribs facing up, perpendicular to the supports.
- Fasten at every support with pins, powder-actuated fasteners, or TEK screws.
- Overlap sidelaps and fasten with button punching or screws at 12" o.c.
Fasteners and attachments
- Deck is secured to supports with pins or powder-actuated fasteners
- #10 TEK screws at 6" o.c. on edges
- Sidelaps are attached with button punching or #10 TEK screws at 12" o.c.
Confirm the profile, gauge, span, loads and connections against your project drawings and the applicable product load tables before ordering.
Applications

Industrial Flooring with Exposed Ceiling
Strong support for industrial floor systems plus an architecturally finished exposed soffit, which suits schools, offices, and civic buildings.

Multi-Level Parking Structures
A frequent choice for parking garages, giving permanent formwork and a clean exposed underside that cuts finishing costs.
Standards and product documentation
Type BI Inverted Form Deck meets SDI (Steel Deck Institute) specifications and ANSI standards, supporting solid design and performance on Lakeland jobs.
Type BI Inverted Form Deck questions
What is Type BI inverted form deck used for?
Architectural ceiling systems, multi-level parking structures, schools, offices, and any facility where an attractive exposed soffit is wanted.
How does installing Type BI differ from standard form deck?
Type BI is laid inverted with the ribs up. That leaves the flat side exposed below as a finished ceiling, with no extra finishing materials.
Which gauges does Type BI come in?
22, 20, 18, and 16 GA, giving options for different structural requirements.
What finishes does Type BI come with?
G60 and G90 galvanized finishes resist corrosion, and prime-painted finishes provide extra protection.
Can I get Type BI cut to length in Lakeland?
Yes, custom lengths from 6'-0" to 40'-0" are available, ensuring a precise fit and minimal waste.
Before you order
Order Metal Form Decks for your Lakeland project
Share your drawings or a material list and our team will check quantities, profiles and cut lengths. We also prepare takeoffs and shop drawings, then send pricing and delivery options for the Lakeland job site.
Start your quoteWhat we need to quote your project
- Your Lakeland project address and when you need material on site.
- Drawings or a material list with quantities and cut lengths.
- Specified profile, dimensions, gauge and finish.
- Connection details, load tables and any supporting documentation.
How We Work
We Guide You Through the Process
From manufacturing to delivery, we ensure precision, efficiency, and compliance with industry standards.
Takeoff and Shop Drawings Services
We provide specialized takeoff services for accurate quotations and detailed shop drawings to produce optimized cutting lists for sheets, ensuring efficient execution and waste-free outcomes in your projects.
Manufacture
We manufacture metal decks to SDI and ANSI standards, ensuring strength, durability, and compliance. We provide custom lengths and high-precision fabrication for optimized performance in roof, floor, and form deck applications.
Swift Deliveries & Nationwide Reach
While based in South Florida, we serve clients nationwide, ensuring quality, efficiency, and timely deliveries across the U.S., reflecting our commitment to excellence without boundaries.
Frequently Asked Questions
Do you supply form deck in Lakeland?
Yes. We deliver form deck to Lakeland with same-day or next-day service. Call 305-760-2575 for availability.
What is the difference between form deck and composite deck?
Form deck acts as temporary or permanent formwork the concrete carries the load after curing. Composite deck bonds structurally with the concrete to share load permanently.
What is form deck for?
Form deck is temporary or permanent structural formwork for concrete slabs. It carries the weight of wet concrete during pouring and curing, giving floor and roof slabs a stable base.
How does form deck compare with composite deck?
Composite deck bonds with concrete and acts as a structural element in the finished slab. Form deck is only formwork, so after curing the concrete slab carries the load on its own.
What benefits does form deck bring to multi-level construction?
It speeds up construction by removing the need for temporary wood forms and cuts material waste. It is also a consistent, lightweight formwork system that can stay in place after the concrete cures.
Which gauges and finishes does form deck come in?
Form deck is offered in gauges 16 to 28, with G60 and G90 galvanized finishes for corrosion resistance. Custom lengths of 6 to 40 feet are available.
