SDI Member · ANSI/SDI compliant
Metal form deck supplier in Pensacola
Miami-produced metal form deck in Pensacola the fundamental support for your project needs.

Local Metal Form Decks supply for Pensacola
General contractors and steel erectors in Pensacola rely on Miami Metal Deck for Metal Form Decks on projects across Escambia County and the North Florida / Panhandle region. Deliveries to Pensacola leave our Miami Gardens facility on a schedule set with your team, with 1-day service available to major Florida cities.
Coastal conditions around Pensacola make corrosion protection a priority, and G90 galvanized steel is a common choice there. Our team checks the specified finish before we quote. Projects in Pensacola follow the Florida Building Code wind-load requirements, so we work directly from your engineer's deck schedule, gauges and attachment details.
Product guide
Product specifications for your Pensacola project
Compare profiles, dimensions, material options and applications to prepare your order. Select a product below to explore its technical details.
9/16" Type S Form Deck
Type S Form Deck serves as permanent formwork under concrete slabs in floors and roofs. Its strength and simple installation make it a common pick, and it is available in Pensacola in gauges 28 GA to 20 GA, produced in line with SDI and ANSI standards.
Dimensions and profile

| Property | Dimension |
|---|---|
| Profile Depth | 9/16 inches |
| Coverage Width | 36 inches |
| Rib Spacing | 2.57 inches (center to center) |
| Rib Height | 9/16 inches |
Rapid slab forming is the strength of Type S Form Deck: a shallow 9/16-inch rib depth and a standard 36-inch coverage width. The 2.57-inch rib spacing (center to center) creates a stable forming surface that minimizes concrete volume and maintains structural integrity.
Gauges and thicknesses
| Gauge | Bare steel thickness (in) | Weight (lbs/sq ft) | Typical applications |
|---|---|---|---|
| 28 | 0.0149 | 0.65 | Light-duty concrete formwork, low-load applications. |
| 26 | 0.0179 | 0.75 | Standard concrete slabs. |
| 24 | 0.0239 | 1.0 | Medium-duty floor and roof slabs. |
| 22 | 0.0299 | 1.25 | Medium-duty floors, multi-level buildings. |
| 20 | 0.0358 | 1.5 | Heavy-duty formwork, bridges. |
You can specify Type S Form Deck in gauges 28, 26, 24, 22, and 20. The lighter gauges (28 and 26) are an economical fit for standard concrete slabs. For longer spans and heavier concrete loads, such as bridges and industrial floors, step up to the heavier gauges (22 and 20).
Finishes and coatings
| Finish | Details |
|---|---|
| Galvanized G60 | Zinc coating of 0.6 oz/ft². Recommended for general environments. |
| Galvanized G90 | Zinc coating of 0.9 oz/ft². Ideal for highly corrosive environments. |
| Prime-Painted | Provides a base coat for additional protection or paint adhesion. |
| Bare Steel | Unfinished; typically for indoor use or controlled environments. |
Type S Form Deck is supplied galvanized (G60 and G90) or prime-painted. Galvanizing protects against corrosion, and G90 gives extra protection in highly corrosive conditions. G60 and G90 finishes both meet ASTM A653 specifications.
Material and finish options
Our Type S Form Deck is made from high-strength 80 KSI steel. Choose a corrosion-resistant galvanized finish that meets SDI/ANSI standards, one of several painted finishes for a tailored look, or bare steel for custom applications. Every finish is meant to improve durability and keep performance steady in demanding environments.
Custom lengths
Smaller projects can use deck as short as 6′-0″, and larger constructions can take lengths up to 40′-0″. Tell us what your Pensacola project needs and we will cut to it, aiming for the best fit with minimal waste.
9/16" Type S Form Deck features
Type S Form Deck pairs high structural strength with efficient concrete forming and corrosion-resistant finishes. It is an economical, flexible choice for multi-level buildings, bridges, and tunnel construction.
High Structural Strength
Engineered for concrete slab support, with strength and stability that hold during and after the pour.
Efficient Concrete Formwork
Fast construction is the draw: this form deck suits slab forming in multi-level buildings, bridges, and tunnels, and it saves labor time and material.
Galvanized or Prime-Painted Finish
Durable, corrosion-resistant G60/G90 galvanized or prime-painted finishes for demanding environments.
Cost-Effective Solution
Its lightweight shallow profile means less concrete and a stable forming surface, which brings down project costs.
Compliance with SDI Standards
Steel Deck Institute (SDI) and ANSI guidelines are met, which ensures quality and code compliance.
Versatile Design Options
Gauges 28 through 20 are offered along with G60/G90 galvanized coatings and custom lengths of 6 to 40 feet.
Installation and connections
Installation practices
- Run the deck perpendicular to the supports.
- Secure it to each support using pins, powder-actuated fasteners, or TEK screws.
- Lap the sidelaps, then fasten with screws at 12" o.c.
Fasteners and attachments
- Pins or powder-actuated fasteners secure the deck to the supports
- #10 TEK screws at 6" o.c. on edges and 12" o.c. for sidelaps
- Sidelaps fastened by button punching or #10 TEK screws at 12" o.c.
Confirm the profile, gauge, span, loads and connections against your project drawings and the applicable product load tables before ordering.
Applications

Composite Floor Slabs
Well suited to forming slabs in multi-level buildings, bridges, and tunnels. A shallow rib profile keeps concrete volume down and gives a stable, efficient surface to pour on.

Bridge and Tunnel Formwork
Permanent concrete formwork for bridge decks and tunnel construction is a widespread use for Type S Form Deck, which supplies structural support as concrete goes in.
Standards and product documentation
Design and performance of Type S Form Deck follow SDI (Steel Deck Institute) specifications and ANSI standards, a point worth noting for any project in Pensacola.
9/16" Type S Form Deck questions
What does Type S form deck do?
Type S form deck is permanent formwork for concrete slabs in floor and roof systems. It provides a stable base during the pour and remains in place after the concrete cures.
What separates form deck from composite deck?
Form deck is just formwork, and after curing the concrete slab bears the load by itself. Composite deck bonds with the concrete structurally and shares the load for good.
What gauges can I order in Type S form deck?
Choose from 28, 26, 24, 22, and 20 GA, with thickness from 0.0149" up to 0.0358".
What are the recommended fastening methods?
Pins, powder-actuated fasteners, or TEK screws attach Type S Form Deck. For sidelaps, use button punching or #10 TEK screws at 12" o.c.
Can Pensacola projects get Type S form deck in custom lengths?
Yes, lengths from 6'-0" to 40'-0" are available. This limits waste and gives a precise fit on each project.
1" Type HD Form Deck
Type HD Form Deck is heavy-duty formwork for concrete in floors and roofs, with strong support and durability. It comes in gauges from 26 GA to 20 GA, handling greater loads and longer spans efficiently. The deck meets SDI and ANSI standards, and galvanized finishes (G60 and G90) add corrosion resistance.
Dimensions and profile

| Property | Dimension |
|---|---|
| Profile Depth | 1 inch |
| Coverage Width | 36 inches |
| Rib Spacing | 4 inches (center to center) |
| Rib Height | 1 inch |
Heavy-duty concrete formwork in floors and roofs is where Type HD Form Deck fits best, with a 1-inch rib depth and 36-inch coverage width. Rib spacing is 4 inches (center to center), and the 39-inch overall material width makes for secure overlaps and excellent concrete support. The profile takes on greater loads and reduces material costs, giving strength and durability for demanding projects.
Gauges and thicknesses
| Gauge | Bare steel thickness (in) | Weight (lbs/sq ft) | Typical applications |
|---|---|---|---|
| 26 | 0.0179 | 0.75 | Light-duty concrete formwork, low-load floors. |
| 24 | 0.0239 | 1.0 | Standard floors, light industrial applications. |
| 22 | 0.0299 | 1.25 | Medium-duty floors, parking structures. |
| 20 | 0.0359 | 1.5 | Heavy-duty formwork, bridges, industrial slabs. |
Type HD Form Deck comes in gauges 26, 24, 22, and 20. Gauges 26 and 24 are the lighter, cost-effective choices for standard concrete slabs and moderate spans. For longer spans and heavier concrete loads, such as industrial floors, bridges, and parking structures, gauges 22 and 20 give superior strength and support.
Finishes and coatings
| Finish | Details |
|---|---|
| Galvanized G60 | Zinc coating of 0.6 oz/ft². Recommended for general environments. |
| Galvanized G90 | Zinc coating of 0.9 oz/ft². Ideal for highly corrosive environments. |
| Prime-Painted | Provides a base coat for additional protection or paint adhesion. |
| Bare Steel | Unfinished; typically for indoor use or controlled environments. |
Type HD Form Deck is offered in several finishes for long-term durability: galvanized (G60 and G90) and prime-painted. Galvanizing provides excellent corrosion resistance, and G90 carries a thicker zinc layer for high-moisture or chemical environments. A prime-painted finish adds a protective base coat. G60 and G90 finishes conform to ASTM A653 specifications.
Material and finish options
Type HD Deck is high-strength 80 KSI steel. Order it with a corrosion-resistant galvanized finish that meets SDI/ANSI standards, with a choice of painted finishes for tailored aesthetics, or as bare steel for custom applications. Each finish is intended to extend durability and sustain performance in demanding environments.
Custom lengths
Pick deck lengths from 6′-0″ for smaller projects to 40′-0″ for large spans. We work to your specified dimensions, with the aim of an optimal fit and minimal waste.
1" Type HD Form Deck features
Heavy-duty load support, efficient concrete bonding, and enhanced durability define our 1" Type HD Form Deck, a strong pick for industrial floors, bridge formwork, and demanding structural applications in Pensacola.
Heavy-Duty Load Support
Higher concrete loads are what Type HD Form Deck is engineered for, making it ideal when superior strength and stability matter.
Efficient Concrete Bonding
The deep profile carries thicker concrete slabs, which spreads load better and supports long-term performance.
Galvanized or Prime-Painted Finish
G60/G90 galvanized or prime-painted finishes are available for durability and corrosion resistance.
Cost-Effective Formwork Solution
A fit for heavy-duty work such as parking structures, bridge formwork, and industrial floors, and it adapts easily to complex construction needs.
Compliance with SDI Standards
It meets Steel Deck Institute (SDI) and ANSI guidelines, so quality and code compliance are assured.
Versatile Gauge Options
Gauges 26 GA to 20 GA let you meet specific load requirements without losing durability.
Installation and connections
Installation practices
- Run the deck perpendicular to the supports.
- At each support, secure the deck with pins, powder-actuated fasteners, or TEK screws.
- Overlap the sidelaps and fasten with screws at 12" o.c.
Fasteners and attachments
- Pins or powder-actuated fasteners secure the deck to the supports
- #10 TEK screws at 6" o.c. on edges and 12" o.c. for sidelaps
- Sidelaps attached through button punching or #10 TEK screws at 12" o.c.
Confirm the profile, gauge, span, loads and connections against your project drawings and the applicable product load tables before ordering.
Applications

Heavy Industrial Floor Systems
Heavy industrial floors that carry high-load equipment and machinery rely on the strong support of Type HD Form Deck. It keeps performing over time in demanding industrial environments.

Bridge and Highway Formwork
Permanent formwork on bridge and highway projects is a common role for Type HD Form Deck. It supports heavy concrete loads as the concrete is placed and adds lasting strength to the structure.
Standards and product documentation
Type HD Form Deck complies with SDI (Steel Deck Institute) specifications, supporting high standards of design and performance on Pensacola projects.
1" Type HD Form Deck questions
What is Type HD Form Deck mainly used for?
Mostly as permanent formwork for heavy-duty concrete slabs in industrial floors, bridges, and infrastructure projects. It holds wet concrete during placement and stays in place after curing.
Which gauges does Type HD Form Deck come in?
26 GA, 24 GA, 22 GA, and 20 GA, which cover a range of load capacities and project requirements.
Is temporary shoring needed with Type HD Form Deck?
It can be. Temporary shoring may be required during installation to carry the weight of the deck and wet concrete until the slab has fully cured.
How is Type HD Form Deck usually fastened?
With pins, powder-actuated fasteners, or TEK screws. Sidelaps are secured by button punching or screws at 12" o.c.
Is Type HD Form Deck available in custom lengths in Pensacola?
Yes, from 6'-0" to 40'-0". That keeps material waste low and gives each project a precise fit.
Type BI Inverted Form Deck
Type B Inverted Form Deck is permanent formwork for concrete slabs in floor and roof systems, offered in gauges 22 GA through 16 GA. It was designed for architectural ceilings where the soffit stays exposed, and Pensacola schools, offices, and commercial buildings are typical uses.
Dimensions and profile

| Property | Dimension |
|---|---|
| Profile Depth | 1.5 inches |
| Coverage Width | 36 inches |
| Rib Spacing | 6 inches (center to center) |
| Rib Height | 1.5 inches |
Rib depth on Type BI Inverted Form Deck is 1.5 inches, and standard coverage width is 36 inches. The ribs point up when installed, which leaves a smooth flat soffit below that serves as an architectural ceiling without further finishes. A 6-inch rib spacing (center to center) maintains structural integrity and allows for concrete placement.
Gauges and thicknesses
| Gauge | Bare steel thickness (in) | Weight (lbs/sq ft) | Typical applications |
|---|---|---|---|
| 22 | 0.0299 | 1.25 | Light-duty floors and ceilings. |
| 20 | 0.0358 | 1.5 | Standard commercial floor systems. |
| 18 | 0.0474 | 2.6 | Heavy-duty applications, parking structures. |
| 16 | 0.0598 | 3.0 | Heavy load industrial floors. |
The gauge lineup for Type BI Inverted Form Deck is 22, 20, 18, and 16. Standard commercial applications suit the lighter gauges (22 and 20). When you need more strength for parking structures or heavy industrial floor systems, use gauges 18 and 16.
Finishes and coatings
| Finish | Details |
|---|---|
| Galvanized G60 | Zinc coating of 0.6 oz/ft². Recommended for general environments. |
| Galvanized G90 | Zinc coating of 0.9 oz/ft². Ideal for highly corrosive environments. |
| Prime-Painted | Provides a base coat for additional protection or paint adhesion. |
| Bare Steel | Unfinished; typically for indoor use or controlled environments. |
Galvanized (G60 and G90) and prime-painted finishes are available for Type BI Inverted Form Deck. Galvanizing resists corrosion, and G90 adds protection in highly corrosive environments. G60 and G90 finishes conform to ASTM A653.
Material and finish options
Type BI Inverted Form Deck is high-strength steel and can be ordered with a corrosion-resistant galvanized finish that meets ANSI/SDI standards, in a range of painted finishes for tailored aesthetics, or as bare steel for custom applications. Each finish is meant to improve durability and keep performance consistent.
Custom lengths
Lengths begin at 6′-0″ for smaller projects and extend to 40′-0″ for larger ones. We supply the dimensions you specify, so the deck fits well and offcuts stay minimal.
Type BI Inverted Form Deck features
Choose Type BI Inverted Form Deck for strong structure, efficient formwork, and corrosion-resistant finishes. It is well matched to architectural ceilings, multi-level parking structures, and commercial floor systems with exposed soffits.
High Structural Strength
Carries concrete and live loads and also gives you a finished, exposed ceiling surface.
Efficient Formwork
As permanent formwork for concrete slabs, it saves labor and construction time because no temporary forms need to be removed.
Corrosion Resistance
G60/G90 galvanized or prime-painted finishes hold up against corrosion in commercial environments.
Cost-Effective
One product handles both formwork and structural support, which lowers material and labor costs for exposed ceilings.
Compliance with Standards
SDI and ANSI guidelines are met, so quality and code compliance carry across applications.
Versatile Options
A choice of gauges (22–16 GA) and finishes covers different load requirements and architectural specifications.
Installation and connections
Installation practices
- Install the deck with ribs facing up, perpendicular to the supports.
- Fasten at every support with pins, powder-actuated fasteners, or TEK screws.
- Overlap sidelaps and fasten with button punching or screws at 12" o.c.
Fasteners and attachments
- Deck is secured to supports with pins or powder-actuated fasteners
- #10 TEK screws at 6" o.c. on edges
- Sidelaps are attached with button punching or #10 TEK screws at 12" o.c.
Confirm the profile, gauge, span, loads and connections against your project drawings and the applicable product load tables before ordering.
Applications

Industrial Flooring with Exposed Ceiling
Strong support for industrial floor systems plus an architecturally finished exposed soffit, which suits schools, offices, and civic buildings.

Multi-Level Parking Structures
A frequent choice for parking garages, giving permanent formwork and a clean exposed underside that cuts finishing costs.
Standards and product documentation
SDI (Steel Deck Institute) specifications and ANSI standards apply to Type BI Inverted Form Deck, which supports high standards of design and performance.
Type BI Inverted Form Deck questions
Which projects use Type BI inverted form deck?
It appears in architectural ceiling systems, multi-level parking structures, schools, offices, and facilities needing an attractive exposed soffit.
What is different about installing Type BI?
The deck is installed inverted, ribs up, so the flat side faces down as a finished ceiling surface and needs no added finishing materials.
What gauge options exist?
Gauges 22, 20, 18, and 16 GA cover a range of structural requirements.
What finish options are there?
Corrosion resistance comes from G60 and G90 galvanized finishes, and prime-painted finishes add protection.
Does Type BI come in custom lengths for Pensacola jobs?
Yes, from 6'-0" to 40'-0", so each project gets a precise fit with minimal waste.
Before you order
Order Metal Form Decks for your Pensacola project
Share your drawings or a material list and our team will check quantities, profiles and cut lengths. We also prepare takeoffs and shop drawings, then send pricing and delivery options for the Pensacola job site.
Start your quoteWhat to include in your quote request
- Your Pensacola project address and when you need material on site.
- Drawings or a material list with quantities and cut lengths.
- Specified profile, dimensions, gauge and finish.
- Connection details, load tables and any supporting documentation.
How We Work
We Guide You Through the Process
From manufacturing to delivery, we ensure precision, efficiency, and compliance with industry standards.
Takeoff and Shop Drawings Services
We provide specialized takeoff services for accurate quotations and detailed shop drawings to produce optimized cutting lists for sheets, ensuring efficient execution and waste-free outcomes in your projects.
Manufacture
We manufacture metal decks to SDI and ANSI standards, ensuring strength, durability, and compliance. We provide custom lengths and high-precision fabrication for optimized performance in roof, floor, and form deck applications.
Swift Deliveries & Nationwide Reach
While based in South Florida, we serve clients nationwide, ensuring quality, efficiency, and timely deliveries across the U.S., reflecting our commitment to excellence without boundaries.
Frequently Asked Questions
Do you supply form deck in Pensacola?
Yes. We deliver form deck to Pensacola with same-day or next-day service. Call 305-760-2575 for availability.
What is the difference between form deck and composite deck?
Form deck acts as temporary or permanent formwork the concrete carries the load after curing. Composite deck bonds structurally with the concrete to share load permanently.
What role does form deck play?
As formwork, temporary or permanent, it supports concrete slabs. The deck takes the weight of wet concrete while it is poured and cures, offering a stable base for floor and roof slabs.
Is form deck the same as composite deck?
No. Composite deck is designed to bond with concrete and take part structurally in the finished slab. Form deck acts only as formwork, and once cured, the slab carries the load by itself.
How does form deck help in multi-level construction?
Eliminating temporary wood forms speeds up the work and reduces waste. It gives a consistent, lightweight formwork system, and it can be left in place after the concrete cures.
Which gauges and finishes do you stock?
Form deck comes in gauges from 16 to 28, with G60 and G90 galvanized finishes that resist corrosion. Custom lengths from 6 to 40 feet are available for Pensacola orders.
