SDI Member · ANSI/SDI compliant

Metal form deck supplier in Tallahassee

Miami-produced metal form deck in Tallahassee the fundamental support for your project needs.

Steel Deck Institute Member
SDI Member · ANSI/SDI compliant

Metal Form Decks for Tallahassee job sites

Miami Metal Deck supplies Metal Form Decks to contractors, erectors and fabricators building in Tallahassee and across Leon County and the North Florida / Panhandle region. Deliveries to Tallahassee leave our Miami Gardens facility on a schedule set with your team, with 1-day service available to major Florida cities.

Inland sites around Tallahassee typically see less salt exposure, so the choice between G60 and G90 galvanized usually follows the engineer's specifications and the building's use. We supply to the gauges, lengths and finishes on your approved drawings, which are designed to the Florida Building Code requirements that apply in Leon County.

Product guide

Product specifications for your Tallahassee project

Compare profiles, dimensions, material options and applications to prepare your order. Select a product below to explore its technical details.

9/16" Type S Form Deck

Slab construction in floors and roofs relies on Type S Form Deck as permanent formwork, thanks to its strength and straightforward installation. Gauges run from 28 GA to 20 GA, and manufacturing meets SDI and ANSI standards. It is a regular choice for Tallahassee concrete work.

Dimensions and profile

9/16" Type S Form Deck profile dimensions
9/16" Type S Form Deck dimensions
PropertyDimension
Profile Depth9/16 inches
Coverage Width36 inches
Rib Spacing2.57 inches (center to center)
Rib Height9/16 inches

With a shallow rib depth of 9/16 inch and a standard 36-inch coverage width, Type S Form Deck is well suited to quick concrete slab forming. Ribs sit 2.57 inches apart (center to center), giving a steady forming surface that limits concrete volume while keeping the structure sound.

Gauges and thicknesses

9/16" Type S Form Deck gauges
GaugeBare steel thickness (in)Weight (lbs/sq ft)Typical applications
280.01490.65Light-duty concrete formwork, low-load applications.
260.01790.75Standard concrete slabs.
240.02391.0Medium-duty floor and roof slabs.
220.02991.25Medium-duty floors, multi-level buildings.
200.03581.5Heavy-duty formwork, bridges.

You can specify Type S Form Deck in gauges 28, 26, 24, 22, and 20. The lighter gauges (28 and 26) are an economical fit for standard concrete slabs. For longer spans and heavier concrete loads, such as bridges and industrial floors, step up to the heavier gauges (22 and 20).

Finishes and coatings

9/16" Type S Form Deck finishes
FinishDetails
Galvanized G60Zinc coating of 0.6 oz/ft². Recommended for general environments.
Galvanized G90Zinc coating of 0.9 oz/ft². Ideal for highly corrosive environments.
Prime-PaintedProvides a base coat for additional protection or paint adhesion.
Bare SteelUnfinished; typically for indoor use or controlled environments.

Finish choices for Type S Form Deck are galvanized (G60 and G90) and prime-painted. The galvanized coatings resist corrosion, and G90 adds protection where conditions are highly corrosive. Both G60 and G90 conform to ASTM A653.

Material and finish options

Made from high-strength 80 KSI steel, Type S Form Deck can be ordered with a corrosion-resistant galvanized finish that meets SDI/ANSI standards, with a range of painted finishes for tailored aesthetics, or as bare steel for custom applications. All finishes are meant to boost durability and hold up in demanding environments.

Custom lengths

From 6′-0″ pieces for smaller projects to spans reaching 40′-0″ for larger construction, we supply the dimensions you need. Our custom length service is set up around your requirements, so the deck fits well and little material is wasted.

9/16" Type S Form Deck features

Type S Form Deck pairs high structural strength with efficient concrete forming and corrosion-resistant finishes. It is an economical, flexible choice for multi-level buildings, bridges, and tunnel construction.

High Structural Strength

Designed to support concrete slabs, giving stability and structural strength during and after concrete placement.

Efficient Concrete Formwork

This quick-to-build form deck suits slab forming in multi-level buildings, bridges, and tunnels, and it reduces labor time and material costs.

Galvanized or Prime-Painted Finish

G60/G90 galvanized or prime-painted finishes add durability and corrosion resistance where conditions are demanding.

Cost-Effective Solution

A lightweight, shallow profile limits concrete use while offering a stable forming surface, so overall project costs drop.

Compliance with SDI Standards

Conforms to Steel Deck Institute (SDI) and ANSI guidelines, supporting quality and code compliance.

Versatile Design Options

Gauges 28 through 20, G60/G90 galvanized coatings, and custom lengths between 6 and 40 feet.

Installation and connections

Installation practices

  • Run the deck perpendicular to the supports.
  • Secure it to each support using pins, powder-actuated fasteners, or TEK screws.
  • Lap the sidelaps, then fasten with screws at 12" o.c.

Fasteners and attachments

  • Pins or powder-actuated fasteners secure the deck to the supports
  • #10 TEK screws at 6" o.c. on edges and 12" o.c. for sidelaps
  • Sidelaps fastened by button punching or #10 TEK screws at 12" o.c.

Confirm the profile, gauge, span, loads and connections against your project drawings and the applicable product load tables before ordering.

Applications

Composite Floor Slabs

Composite Floor Slabs

Well suited to forming slabs in multi-level buildings, bridges, and tunnels. A shallow rib profile keeps concrete volume down and gives a stable, efficient surface to pour on.

Bridge and Tunnel Formwork

Bridge and Tunnel Formwork

Permanent concrete formwork for bridge decks and tunnel construction is a widespread use for Type S Form Deck, which supplies structural support as concrete goes in.

Standards and product documentation

Type S Form Deck is built to SDI (Steel Deck Institute) specifications and ANSI standards, which supports consistent design and performance for Tallahassee projects.

9/16" Type S Form Deck questions

What does Type S form deck do?

Type S form deck is permanent formwork for concrete slabs in floor and roof systems. It provides a stable base during the pour and remains in place after the concrete cures.

What separates form deck from composite deck?

Form deck is just formwork, and after curing the concrete slab bears the load by itself. Composite deck bonds with the concrete structurally and shares the load for good.

What gauges can I order in Type S form deck?

Choose from 28, 26, 24, 22, and 20 GA, with thickness from 0.0149" up to 0.0358".

What are the recommended fastening methods?

Pins, powder-actuated fasteners, or TEK screws attach Type S Form Deck. For sidelaps, use button punching or #10 TEK screws at 12" o.c.

Can Tallahassee projects get Type S form deck in custom lengths?

Yes, lengths from 6'-0" to 40'-0" are available. This limits waste and gives a precise fit on each project.

1" Type HD Form Deck

Heavy-duty concrete formwork in floors and roofs is the purpose of Type HD Form Deck, which delivers strong support and durability. Gauges run from 26 GA to 20 GA, so it copes with greater loads and longer spans. SDI and ANSI standards apply, and galvanized finishes such as G60 and G90 improve corrosion resistance for Tallahassee projects.

Dimensions and profile

1" Type HD Form Deck profile dimensions
1" Type HD Form Deck dimensions
PropertyDimension
Profile Depth1 inch
Coverage Width36 inches
Rib Spacing4 inches (center to center)
Rib Height1 inch

Type HD Form Deck has a 1-inch rib depth and a standard 36-inch coverage width, a fit for heavy-duty concrete formwork in floors and roofs. Ribs are spaced 4 inches (center to center), and the overall material width of 39 inches gives secure overlaps and solid concrete support. The profile carries greater loads and holds down material costs, which helps on demanding construction projects.

Gauges and thicknesses

1" Type HD Form Deck gauges
GaugeBare steel thickness (in)Weight (lbs/sq ft)Typical applications
260.01790.75Light-duty concrete formwork, low-load floors.
240.02391.0Standard floors, light industrial applications.
220.02991.25Medium-duty floors, parking structures.
200.03591.5Heavy-duty formwork, bridges, industrial slabs.

Choose from gauges 26, 24, 22, and 20 for Type HD Form Deck. The lighter gauges, 26 and 24, are cost-effective for standard concrete slabs and moderate spans. Gauges 22 and 20 give superior strength and support over longer spans and heavier concrete loads, which makes them right for industrial floors, bridges, and parking structures.

Finishes and coatings

1" Type HD Form Deck finishes
FinishDetails
Galvanized G60Zinc coating of 0.6 oz/ft². Recommended for general environments.
Galvanized G90Zinc coating of 0.9 oz/ft². Ideal for highly corrosive environments.
Prime-PaintedProvides a base coat for additional protection or paint adhesion.
Bare SteelUnfinished; typically for indoor use or controlled environments.

Type HD Form Deck has multiple finish options for durability and long-term performance, including galvanized (G60 and G90) and prime-painted. Galvanized coating resists corrosion well, and G90, with its thicker zinc layer, protects in high-moisture or chemical environments. Prime paint adds a protective base coat. G60 and G90 finishes conform to ASTM A653 specifications.

Material and finish options

Type HD Deck is high-strength 80 KSI steel. Order it with a corrosion-resistant galvanized finish that meets SDI/ANSI standards, with a choice of painted finishes for tailored aesthetics, or as bare steel for custom applications. Each finish is intended to extend durability and sustain performance in demanding environments.

Custom lengths

Pick deck lengths from 6′-0″ for smaller projects to 40′-0″ for large spans. We work to your specified dimensions, with the aim of an optimal fit and minimal waste.

1" Type HD Form Deck features

Heavy-duty load support, efficient concrete bonding, and enhanced durability define our 1" Type HD Form Deck, a strong pick for industrial floors, bridge formwork, and demanding structural applications in Tallahassee.

Heavy-Duty Load Support

Type HD Form Deck is engineered for higher concrete loads, which makes it right for projects needing superior strength and stability.

Efficient Concrete Bonding

Its deep profile accommodates thicker concrete slabs, giving better load distribution and lasting performance.

Galvanized or Prime-Painted Finish

Select G60/G90 galvanized or prime-painted finishes for added durability and corrosion resistance.

Cost-Effective Formwork Solution

Parking structures, bridge formwork, and industrial floors are typical heavy-duty uses, and the deck adapts easily to complex construction needs.

Compliance with SDI Standards

Steel Deck Institute (SDI) and ANSI guidelines are met, ensuring quality and code compliance.

Versatile Gauge Options

From 26 GA to 20 GA, there is flexibility to meet specific load requirements and stay durable.

Installation and connections

Installation practices

  • Lay the deck perpendicular to the supports.
  • Fasten at each support with pins, powder-actuated fasteners, or TEK screws.
  • Overlap the sidelaps and secure them with screws at 12" o.c.

Fasteners and attachments

  • Deck is fixed to supports with pins or powder-actuated fasteners
  • #10 TEK screws at 6" o.c. on edges and 12" o.c. for sidelaps
  • Sidelaps joined by button punching or #10 TEK screws at 12" o.c.

Confirm the profile, gauge, span, loads and connections against your project drawings and the applicable product load tables before ordering.

Applications

Heavy Industrial Floor Systems

Heavy Industrial Floor Systems

Heavy industrial floors that carry high-load equipment and machinery rely on the strong support of Type HD Form Deck. It keeps performing over time in demanding industrial environments.

Bridge and Highway Formwork

Bridge and Highway Formwork

Permanent formwork on bridge and highway projects is a common role for Type HD Form Deck. It supports heavy concrete loads as the concrete is placed and adds lasting strength to the structure.

Standards and product documentation

Type HD Form Deck is produced to SDI (Steel Deck Institute) specifications, which keeps design and performance standards high.

1" Type HD Form Deck questions

What is Type HD Form Deck primarily for?

Permanent formwork for heavy-duty concrete slabs in industrial floors, bridges, and infrastructure projects. It supports wet concrete during placement and remains after curing.

Which gauges are offered in Type HD Form Deck?

Gauges 26 GA, 24 GA, 22 GA, and 20 GA, which accommodate different load capacities and project requirements.

Does Type HD Form Deck call for temporary shoring in Tallahassee?

It may. Temporary shoring can be required during installation to support the deck and wet concrete weight until the slab has fully cured.

What is the recommended way to fasten Type HD Form Deck?

It is typically attached with pins, powder-actuated fasteners, or TEK screws, and sidelaps are secured with button punching or screws at 12" o.c.

Does Type HD Form Deck come in custom lengths?

Yes, from 6'-0" to 40'-0", which minimizes waste and fits each project precisely.

Type BI Inverted Form Deck

Exposed-soffit architectural ceilings call for Type B Inverted Form Deck, which also acts as permanent formwork for concrete slabs in floor and roof systems. Gauges range from 22 GA through 16 GA. Schools, offices, and commercial facilities in Tallahassee are among its common uses.

Dimensions and profile

Type BI Inverted Form Deck profile dimensions
Type BI Inverted Form Deck dimensions
PropertyDimension
Profile Depth1.5 inches
Coverage Width36 inches
Rib Spacing6 inches (center to center)
Rib Height1.5 inches

Type BI Inverted Form Deck has a 1.5-inch rib depth and a standard 36-inch coverage width. Ribs face upward when it is installed, so a smooth, flat soffit shows below and works as an architectural ceiling with no added finish. Rib spacing of 6 inches (center to center) keeps the structure sound and still accommodates concrete placement.

Gauges and thicknesses

Type BI Inverted Form Deck gauges
GaugeBare steel thickness (in)Weight (lbs/sq ft)Typical applications
220.02991.25Light-duty floors and ceilings.
200.03581.5Standard commercial floor systems.
180.04742.6Heavy-duty applications, parking structures.
160.05983.0Heavy load industrial floors.

Type BI Inverted Form Deck is produced in gauges 22, 20, 18, and 16. Gauges 22 and 20, the lighter ones, are ideal for standard commercial applications, while 18 and 16 add strength for parking structures and heavy industrial floor systems.

Finishes and coatings

Type BI Inverted Form Deck finishes
FinishDetails
Galvanized G60Zinc coating of 0.6 oz/ft². Recommended for general environments.
Galvanized G90Zinc coating of 0.9 oz/ft². Ideal for highly corrosive environments.
Prime-PaintedProvides a base coat for additional protection or paint adhesion.
Bare SteelUnfinished; typically for indoor use or controlled environments.

Galvanized (G60 and G90) and prime-painted finishes are available for Type BI Inverted Form Deck. Galvanizing resists corrosion, and G90 adds protection in highly corrosive environments. G60 and G90 finishes conform to ASTM A653.

Material and finish options

Specify Type BI Inverted Form Deck in high-strength steel with a corrosion-resistant galvanized finish that meets ANSI/SDI standards. Painted finishes are available for tailored aesthetics, and bare steel is available for custom applications. Durability and steady performance are the goals behind each finish.

Custom lengths

We cut deck from 6′-0″ for smaller projects up to 40′-0″ for larger constructions. Our custom length service follows your requirements to deliver an optimal fit with minimal waste, whatever the size of the job in Tallahassee.

Type BI Inverted Form Deck features

Type BI Inverted Form Deck brings high structural strength, efficient formwork, and corrosion-resistant finishes to architectural ceilings, multi-level parking structures, and commercial floor systems that require exposed soffits.

High Structural Strength

Carries concrete and live loads and also gives you a finished, exposed ceiling surface.

Efficient Formwork

As permanent formwork for concrete slabs, it saves labor and construction time because no temporary forms need to be removed.

Corrosion Resistance

G60/G90 galvanized or prime-painted finishes hold up against corrosion in commercial environments.

Cost-Effective

One product handles both formwork and structural support, which lowers material and labor costs for exposed ceilings.

Compliance with Standards

SDI and ANSI guidelines are met, so quality and code compliance carry across applications.

Versatile Options

A choice of gauges (22–16 GA) and finishes covers different load requirements and architectural specifications.

Installation and connections

Installation practices

  • Install the deck with ribs facing up, perpendicular to the supports.
  • Fasten at every support with pins, powder-actuated fasteners, or TEK screws.
  • Overlap sidelaps and fasten with button punching or screws at 12" o.c.

Fasteners and attachments

  • Pins or powder-actuated fasteners hold the deck to the supports
  • #10 TEK screws at 6" o.c. on edges
  • Sidelaps fastened using button punching or #10 TEK screws at 12" o.c.

Confirm the profile, gauge, span, loads and connections against your project drawings and the applicable product load tables before ordering.

Applications

Industrial Flooring with Exposed Ceiling

Industrial Flooring with Exposed Ceiling

Strong support for industrial floor systems plus an architecturally finished exposed soffit, which suits schools, offices, and civic buildings.

Multi-Level Parking Structures

Multi-Level Parking Structures

A frequent choice for parking garages, giving permanent formwork and a clean exposed underside that cuts finishing costs.

Standards and product documentation

Type BI Inverted Form Deck complies with SDI (Steel Deck Institute) specifications and ANSI standards, which keeps design and performance standards high for projects in Tallahassee.

Type BI Inverted Form Deck questions

What is Type BI inverted form deck used for?

Architectural ceiling systems, multi-level parking structures, schools, offices, and any facility where an attractive exposed soffit is wanted.

How does installing Type BI differ from standard form deck?

Type BI is laid inverted with the ribs up. That leaves the flat side exposed below as a finished ceiling, with no extra finishing materials.

Which gauges does Type BI come in?

22, 20, 18, and 16 GA, giving options for different structural requirements.

What finishes does Type BI come with?

G60 and G90 galvanized finishes resist corrosion, and prime-painted finishes provide extra protection.

Can I get Type BI cut to length in Tallahassee?

Yes, custom lengths from 6'-0" to 40'-0" are available, ensuring a precise fit and minimal waste.

Planning your order

Metal Form Decks supply for Tallahassee

Send your project drawings or material list so our team can review quantities, profile requirements and cut lengths. We can help with takeoffs and shop drawings, then confirm pricing and delivery options for your Tallahassee project.

Send your drawings for a quote

What we need to quote your project

  • The profile, gauge and finish shown in your specifications.
  • Quantities and lengths, or the drawings we can take them off from.
  • The Tallahassee job site address, your target delivery date and any access limits.
  • Load tables, attachment details or other documents your engineer specified.

How We Work

We Guide You Through the Process

From manufacturing to delivery, we ensure precision, efficiency, and compliance with industry standards.

01
01

Takeoff and Shop Drawings Services

We provide specialized takeoff services for accurate quotations and detailed shop drawings to produce optimized cutting lists for sheets, ensuring efficient execution and waste-free outcomes in your projects.

02
02

Manufacture

We manufacture metal decks to SDI and ANSI standards, ensuring strength, durability, and compliance. We provide custom lengths and high-precision fabrication for optimized performance in roof, floor, and form deck applications.

03
03

Swift Deliveries & Nationwide Reach

While based in South Florida, we serve clients nationwide, ensuring quality, efficiency, and timely deliveries across the U.S., reflecting our commitment to excellence without boundaries.

Frequently Asked Questions

Do you supply form deck in Tallahassee?

Yes. We deliver form deck to Tallahassee with same-day or next-day service. Call 305-760-2575 for availability.

What is the difference between form deck and composite deck?

Form deck acts as temporary or permanent formwork the concrete carries the load after curing. Composite deck bonds structurally with the concrete to share load permanently.

What is form deck for?

Form deck is temporary or permanent structural formwork for concrete slabs. It carries the weight of wet concrete during pouring and curing, giving floor and roof slabs a stable base.

How does form deck compare with composite deck?

Composite deck bonds with concrete and acts as a structural element in the finished slab. Form deck is only formwork, so after curing the concrete slab carries the load on its own.

What benefits does form deck bring to multi-level construction?

It speeds up construction by removing the need for temporary wood forms and cuts material waste. It is also a consistent, lightweight formwork system that can stay in place after the concrete cures.

Which gauges and finishes does form deck come in?

Form deck is offered in gauges 16 to 28, with G60 and G90 galvanized finishes for corrosion resistance. Custom lengths of 6 to 40 feet are available.

Phone

305 760 25 75

E-Mail

info@mmdeck.com

Address

16000 NW 49th Ave Suite A, Miami Gardens, FL 33014

Get a Free Quote