SDI Member · ANSI/SDI compliant
Metal form deck supplier in Tampa
Miami-produced metal form deck in Tampa the fundamental support for your project needs.

Supplying Metal Form Decks in Tampa
Miami Metal Deck supplies Metal Form Decks to contractors, erectors and fabricators building in Tampa and across Hillsborough County and the Central Florida region. Orders for Tampa ship from our Miami Gardens facility, with 1-day service to major Florida cities and delivery scheduled around your erection sequence.
With Tampa's coastal humidity and salt air, many engineers specify a G90 galvanized finish for its heavier zinc coating; we confirm the finish against your project specifications. We supply to the gauges, lengths and finishes on your approved drawings, which are designed to the Florida Building Code requirements that apply in Hillsborough County.
Product guide
Product specifications for your Tampa project
Compare profiles, dimensions, material options and applications to prepare your order. Select a product below to explore its technical details.
9/16" Type S Form Deck
Type S Form Deck serves as permanent formwork under concrete slabs in floors and roofs. Its strength and simple installation make it a common pick, and it is available in Tampa in gauges 28 GA to 20 GA, produced in line with SDI and ANSI standards.
Dimensions and profile

| Property | Dimension |
|---|---|
| Profile Depth | 9/16 inches |
| Coverage Width | 36 inches |
| Rib Spacing | 2.57 inches (center to center) |
| Rib Height | 9/16 inches |
Rapid slab forming is the strength of Type S Form Deck: a shallow 9/16-inch rib depth and a standard 36-inch coverage width. The 2.57-inch rib spacing (center to center) creates a stable forming surface that minimizes concrete volume and maintains structural integrity.
Gauges and thicknesses
| Gauge | Bare steel thickness (in) | Weight (lbs/sq ft) | Typical applications |
|---|---|---|---|
| 28 | 0.0149 | 0.65 | Light-duty concrete formwork, low-load applications. |
| 26 | 0.0179 | 0.75 | Standard concrete slabs. |
| 24 | 0.0239 | 1.0 | Medium-duty floor and roof slabs. |
| 22 | 0.0299 | 1.25 | Medium-duty floors, multi-level buildings. |
| 20 | 0.0358 | 1.5 | Heavy-duty formwork, bridges. |
You can specify Type S Form Deck in gauges 28, 26, 24, 22, and 20. The lighter gauges (28 and 26) are an economical fit for standard concrete slabs. For longer spans and heavier concrete loads, such as bridges and industrial floors, step up to the heavier gauges (22 and 20).
Finishes and coatings
| Finish | Details |
|---|---|
| Galvanized G60 | Zinc coating of 0.6 oz/ft². Recommended for general environments. |
| Galvanized G90 | Zinc coating of 0.9 oz/ft². Ideal for highly corrosive environments. |
| Prime-Painted | Provides a base coat for additional protection or paint adhesion. |
| Bare Steel | Unfinished; typically for indoor use or controlled environments. |
Type S Form Deck is supplied galvanized (G60 and G90) or prime-painted. Galvanizing protects against corrosion, and G90 gives extra protection in highly corrosive conditions. G60 and G90 finishes both meet ASTM A653 specifications.
Material and finish options
Type S Form Deck uses high-strength 80 KSI steel and ships with a corrosion-resistant galvanized finish that meets SDI/ANSI standards. Painted finishes are offered for tailored aesthetics, and bare steel is available for custom applications. Each option is intended to extend durability and sustain performance in demanding environments.
Custom lengths
Smaller projects can use deck as short as 6′-0″, and larger constructions can take lengths up to 40′-0″. Tell us what your Tampa project needs and we will cut to it, aiming for the best fit with minimal waste.
9/16" Type S Form Deck features
Type S Form Deck pairs high structural strength with efficient concrete forming and corrosion-resistant finishes. It is an economical, flexible choice for multi-level buildings, bridges, and tunnel construction.
High Structural Strength
Engineered for concrete slab support, with strength and stability that hold during and after the pour.
Efficient Concrete Formwork
Fast construction is the draw: this form deck suits slab forming in multi-level buildings, bridges, and tunnels, and it saves labor time and material.
Galvanized or Prime-Painted Finish
Durable, corrosion-resistant G60/G90 galvanized or prime-painted finishes for demanding environments.
Cost-Effective Solution
Its lightweight shallow profile means less concrete and a stable forming surface, which brings down project costs.
Compliance with SDI Standards
Steel Deck Institute (SDI) and ANSI guidelines are met, which ensures quality and code compliance.
Versatile Design Options
Gauges 28 through 20 are offered along with G60/G90 galvanized coatings and custom lengths of 6 to 40 feet.
Installation and connections
Installation practices
- Run the deck perpendicular to the supports.
- Secure it to each support using pins, powder-actuated fasteners, or TEK screws.
- Lap the sidelaps, then fasten with screws at 12" o.c.
Fasteners and attachments
- Pins or powder-actuated fasteners secure the deck to the supports
- #10 TEK screws at 6" o.c. on edges and 12" o.c. for sidelaps
- Sidelaps fastened by button punching or #10 TEK screws at 12" o.c.
Confirm the profile, gauge, span, loads and connections against your project drawings and the applicable product load tables before ordering.
Applications

Composite Floor Slabs
A good match for forming slabs in multi-level buildings, bridges, and tunnels. The shallow rib profile uses less concrete and gives an efficient, stable forming surface.

Bridge and Tunnel Formwork
Bridge decks and tunnel construction often use Type S Form Deck as permanent concrete formwork, since it supports the structure while concrete is being placed.
Standards and product documentation
Type S Form Deck is built to SDI (Steel Deck Institute) specifications and ANSI standards, which supports consistent design and performance for Tampa projects.
9/16" Type S Form Deck questions
What does Type S form deck do?
Type S form deck is permanent formwork for concrete slabs in floor and roof systems. It provides a stable base during the pour and remains in place after the concrete cures.
What separates form deck from composite deck?
Form deck is just formwork, and after curing the concrete slab bears the load by itself. Composite deck bonds with the concrete structurally and shares the load for good.
What gauges can I order in Type S form deck?
Choose from 28, 26, 24, 22, and 20 GA, with thickness from 0.0149" up to 0.0358".
What are the recommended fastening methods?
Pins, powder-actuated fasteners, or TEK screws attach Type S Form Deck. For sidelaps, use button punching or #10 TEK screws at 12" o.c.
Can Tampa projects get Type S form deck in custom lengths?
Yes, lengths from 6'-0" to 40'-0" are available. This limits waste and gives a precise fit on each project.
1" Type HD Form Deck
Floors and roofs that need heavy-duty concrete formwork are served by Type HD Form Deck, with superior support and durability. Gauges span 26 GA to 20 GA, letting it manage greater loads and longer spans efficiently. It meets SDI and ANSI standards and comes in galvanized finishes like G60 and G90 for greater corrosion resistance, ready for Tampa jobs.
Dimensions and profile

| Property | Dimension |
|---|---|
| Profile Depth | 1 inch |
| Coverage Width | 36 inches |
| Rib Spacing | 4 inches (center to center) |
| Rib Height | 1 inch |
Heavy-duty concrete formwork in floors and roofs is where Type HD Form Deck fits best, with a 1-inch rib depth and 36-inch coverage width. Rib spacing is 4 inches (center to center), and the 39-inch overall material width makes for secure overlaps and excellent concrete support. The profile takes on greater loads and reduces material costs, giving strength and durability for demanding projects.
Gauges and thicknesses
| Gauge | Bare steel thickness (in) | Weight (lbs/sq ft) | Typical applications |
|---|---|---|---|
| 26 | 0.0179 | 0.75 | Light-duty concrete formwork, low-load floors. |
| 24 | 0.0239 | 1.0 | Standard floors, light industrial applications. |
| 22 | 0.0299 | 1.25 | Medium-duty floors, parking structures. |
| 20 | 0.0359 | 1.5 | Heavy-duty formwork, bridges, industrial slabs. |
Type HD Form Deck comes in gauges 26, 24, 22, and 20. Gauges 26 and 24 are the lighter, cost-effective choices for standard concrete slabs and moderate spans. For longer spans and heavier concrete loads, such as industrial floors, bridges, and parking structures, gauges 22 and 20 give superior strength and support.
Finishes and coatings
| Finish | Details |
|---|---|
| Galvanized G60 | Zinc coating of 0.6 oz/ft². Recommended for general environments. |
| Galvanized G90 | Zinc coating of 0.9 oz/ft². Ideal for highly corrosive environments. |
| Prime-Painted | Provides a base coat for additional protection or paint adhesion. |
| Bare Steel | Unfinished; typically for indoor use or controlled environments. |
Type HD Form Deck has multiple finish options for durability and long-term performance, including galvanized (G60 and G90) and prime-painted. Galvanized coating resists corrosion well, and G90, with its thicker zinc layer, protects in high-moisture or chemical environments. Prime paint adds a protective base coat. G60 and G90 finishes conform to ASTM A653 specifications.
Material and finish options
High-strength 80 KSI steel is the base of Type HD Deck. A corrosion-resistant galvanized finish meeting SDI/ANSI standards is available, along with a variety of painted finishes for tailored aesthetics and bare steel for custom applications. Each is designed to improve durability and maintain performance in demanding environments.
Custom lengths
Pick deck lengths from 6′-0″ for smaller projects to 40′-0″ for large spans. We work to your specified dimensions, with the aim of an optimal fit and minimal waste.
1" Type HD Form Deck features
Heavy-duty load support, efficient concrete bonding, and enhanced durability define our 1" Type HD Form Deck, a strong pick for industrial floors, bridge formwork, and demanding structural applications in Tampa.
Heavy-Duty Load Support
Type HD Form Deck is engineered for higher concrete loads, which makes it right for projects needing superior strength and stability.
Efficient Concrete Bonding
Its deep profile accommodates thicker concrete slabs, giving better load distribution and lasting performance.
Galvanized or Prime-Painted Finish
Select G60/G90 galvanized or prime-painted finishes for added durability and corrosion resistance.
Cost-Effective Formwork Solution
Parking structures, bridge formwork, and industrial floors are typical heavy-duty uses, and the deck adapts easily to complex construction needs.
Compliance with SDI Standards
Steel Deck Institute (SDI) and ANSI guidelines are met, ensuring quality and code compliance.
Versatile Gauge Options
From 26 GA to 20 GA, there is flexibility to meet specific load requirements and stay durable.
Installation and connections
Installation practices
- Run the deck perpendicular to the supports.
- At each support, secure the deck with pins, powder-actuated fasteners, or TEK screws.
- Overlap the sidelaps and fasten with screws at 12" o.c.
Fasteners and attachments
- Pins or powder-actuated fasteners secure the deck to the supports
- #10 TEK screws at 6" o.c. on edges and 12" o.c. for sidelaps
- Sidelaps attached through button punching or #10 TEK screws at 12" o.c.
Confirm the profile, gauge, span, loads and connections against your project drawings and the applicable product load tables before ordering.
Applications

Heavy Industrial Floor Systems
High-load equipment and machinery on heavy industrial floors get strong support from Type HD Form Deck. The durable design performs over the long term in demanding industrial settings.

Bridge and Highway Formwork
Bridge and highway construction commonly uses Type HD Form Deck as permanent formwork, where it supports heavy concrete loads during placement and adds lasting strength.
Standards and product documentation
Type HD Form Deck complies with SDI (Steel Deck Institute) specifications, supporting high standards of design and performance on Tampa projects.
1" Type HD Form Deck questions
What is Type HD Form Deck mainly used for?
Mostly as permanent formwork for heavy-duty concrete slabs in industrial floors, bridges, and infrastructure projects. It holds wet concrete during placement and stays in place after curing.
Which gauges does Type HD Form Deck come in?
26 GA, 24 GA, 22 GA, and 20 GA, which cover a range of load capacities and project requirements.
Is temporary shoring needed with Type HD Form Deck?
It can be. Temporary shoring may be required during installation to carry the weight of the deck and wet concrete until the slab has fully cured.
How is Type HD Form Deck usually fastened?
With pins, powder-actuated fasteners, or TEK screws. Sidelaps are secured by button punching or screws at 12" o.c.
Is Type HD Form Deck available in custom lengths in Tampa?
Yes, from 6'-0" to 40'-0". That keeps material waste low and gives each project a precise fit.
Type BI Inverted Form Deck
Type B Inverted Form Deck is permanent formwork for concrete slabs in floor and roof systems, offered in gauges 22 GA through 16 GA. It was designed for architectural ceilings where the soffit stays exposed, and Tampa schools, offices, and commercial buildings are typical uses.
Dimensions and profile

| Property | Dimension |
|---|---|
| Profile Depth | 1.5 inches |
| Coverage Width | 36 inches |
| Rib Spacing | 6 inches (center to center) |
| Rib Height | 1.5 inches |
Type BI Inverted Form Deck has a 1.5-inch rib depth and a standard 36-inch coverage width. Ribs face upward when it is installed, so a smooth, flat soffit shows below and works as an architectural ceiling with no added finish. Rib spacing of 6 inches (center to center) keeps the structure sound and still accommodates concrete placement.
Gauges and thicknesses
| Gauge | Bare steel thickness (in) | Weight (lbs/sq ft) | Typical applications |
|---|---|---|---|
| 22 | 0.0299 | 1.25 | Light-duty floors and ceilings. |
| 20 | 0.0358 | 1.5 | Standard commercial floor systems. |
| 18 | 0.0474 | 2.6 | Heavy-duty applications, parking structures. |
| 16 | 0.0598 | 3.0 | Heavy load industrial floors. |
Gauges 22, 20, 18, and 16 are offered for Type BI Inverted Form Deck. For standard commercial work, the lighter gauges (22 and 20) are a good fit. Parking structures and heavy industrial floor systems call for the added strength of gauges 18 and 16.
Finishes and coatings
| Finish | Details |
|---|---|
| Galvanized G60 | Zinc coating of 0.6 oz/ft². Recommended for general environments. |
| Galvanized G90 | Zinc coating of 0.9 oz/ft². Ideal for highly corrosive environments. |
| Prime-Painted | Provides a base coat for additional protection or paint adhesion. |
| Bare Steel | Unfinished; typically for indoor use or controlled environments. |
Type BI Inverted Form Deck ships in galvanized (G60 and G90) and prime-painted finishes. Galvanized coatings give corrosion resistance, and G90 gives extra protection in highly corrosive environments. G60 and G90 finishes conform to ASTM A653 specifications.
Material and finish options
Specify Type BI Inverted Form Deck in high-strength steel with a corrosion-resistant galvanized finish that meets ANSI/SDI standards. Painted finishes are available for tailored aesthetics, and bare steel is available for custom applications. Durability and steady performance are the goals behind each finish.
Custom lengths
Need 6′-0″ lengths for a small project or spans up to 40′-0″ for a large one? We handle both. Our custom length service is built around your requirements for Tampa and beyond, so the deck fits optimally and waste stays minimal.
Type BI Inverted Form Deck features
Type BI Inverted Form Deck offers high structural strength, efficient formwork, and corrosion-resistant finishes. It fits architectural ceilings, multi-level parking structures, and commercial floor systems that need exposed soffits.
High Structural Strength
Supports concrete and live loads while presenting an architecturally finished ceiling surface from below.
Efficient Formwork
Permanent formwork for concrete slabs means less labor and shorter construction time, since there are no temporary forms to strip.
Corrosion Resistance
Durable corrosion resistance in commercial settings comes from G60/G90 galvanized or prime-painted finishes.
Cost-Effective
Formwork and structural support in a single product trim material and labor costs on exposed ceiling work.
Compliance with Standards
Built to SDI and ANSI guidelines, giving quality and code compliance in every application.
Versatile Options
Several gauges (22–16 GA) and finishes address varied load requirements and architectural specifications.
Installation and connections
Installation practices
- Set the deck perpendicular to the supports with the ribs pointing upward.
- Use pins, powder-actuated fasteners, or TEK screws to fasten at each support.
- Lap sidelaps and secure them at 12" o.c. with button punching or screws.
Fasteners and attachments
- Pins or powder-actuated fasteners secure the deck to supports
- #10 TEK screws at 6" o.c. on edges
- Sidelaps attached through button punching or #10 TEK screws at 12" o.c.
Confirm the profile, gauge, span, loads and connections against your project drawings and the applicable product load tables before ordering.
Applications

Industrial Flooring with Exposed Ceiling
Industrial floor systems gain strong support, and the architecturally finished exposed soffit makes it ideal for schools, offices, and civic buildings.

Multi-Level Parking Structures
Parking garages often use it for permanent formwork with a clean exposed underside, which lowers finishing costs.
Standards and product documentation
Type BI Inverted Form Deck meets SDI (Steel Deck Institute) specifications and ANSI standards, supporting solid design and performance on Tampa jobs.
Type BI Inverted Form Deck questions
What is Type BI inverted form deck used for?
Architectural ceiling systems, multi-level parking structures, schools, offices, and any facility where an attractive exposed soffit is wanted.
How does installing Type BI differ from standard form deck?
Type BI is laid inverted with the ribs up. That leaves the flat side exposed below as a finished ceiling, with no extra finishing materials.
Which gauges does Type BI come in?
22, 20, 18, and 16 GA, giving options for different structural requirements.
What finishes does Type BI come with?
G60 and G90 galvanized finishes resist corrosion, and prime-painted finishes provide extra protection.
Can I get Type BI cut to length in Tampa?
Yes, custom lengths from 6'-0" to 40'-0" are available, ensuring a precise fit and minimal waste.
Planning your order
Metal Form Decks supply for Tampa
Send your project drawings or material list so our team can review quantities, profile requirements and cut lengths. We can help with takeoffs and shop drawings, then confirm pricing and delivery options for your Tampa project.
Send your drawings for a quoteWhat to include in your quote request
- The profile, gauge and finish shown in your specifications.
- Quantities and lengths, or the drawings we can take them off from.
- The Tampa job site address, your target delivery date and any access limits.
- Load tables, attachment details or other documents your engineer specified.
How We Work
We Guide You Through the Process
From manufacturing to delivery, we ensure precision, efficiency, and compliance with industry standards.
Takeoff and Shop Drawings Services
We provide specialized takeoff services for accurate quotations and detailed shop drawings to produce optimized cutting lists for sheets, ensuring efficient execution and waste-free outcomes in your projects.
Manufacture
We manufacture metal decks to SDI and ANSI standards, ensuring strength, durability, and compliance. We provide custom lengths and high-precision fabrication for optimized performance in roof, floor, and form deck applications.
Swift Deliveries & Nationwide Reach
While based in South Florida, we serve clients nationwide, ensuring quality, efficiency, and timely deliveries across the U.S., reflecting our commitment to excellence without boundaries.
Frequently Asked Questions
Do you supply form deck in Tampa?
Yes. We deliver form deck to Tampa with same-day or next-day service. Call 305-760-2575 for availability.
What is the difference between form deck and composite deck?
Form deck acts as temporary or permanent formwork the concrete carries the load after curing. Composite deck bonds structurally with the concrete to share load permanently.
Why would a Tampa project use form deck?
Form deck works as temporary or permanent structural formwork for concrete slabs. It holds up wet concrete through pouring and curing, giving floor and roof slabs a stable base.
Form deck or composite deck: which is which?
Composite deck is built to bond with concrete and function structurally in the finished slab. Form deck is just formwork, and the cured concrete slab bears the load independently.
Why use form deck on multi-level buildings?
Without temporary wood forms, construction moves faster and less material is wasted. The lightweight, consistent formwork system can also remain in place after curing.
What gauge and finish choices are there?
Gauges 16 to 28 are offered, finished with G60 or G90 galvanizing to resist corrosion. Custom lengths between 6 and 40 feet can be ordered.
