SDI Member · ANSI/SDI compliant
Metal form deck supplier in Orlando
Miami-produced metal form deck in Orlando the fundamental support for your project needs.

Supplying Metal Form Decks in Orlando
Miami Metal Deck supplies Metal Form Decks to contractors, erectors and fabricators building in Orlando and across Orange County and the Central Florida region. Orders for Orlando ship from our Miami Gardens facility, with 1-day service to major Florida cities and delivery scheduled around your erection sequence.
Inland sites around Orlando typically see less salt exposure, so the choice between G60 and G90 galvanized usually follows the engineer's specifications and the building's use. We supply to the gauges, lengths and finishes on your approved drawings, which are designed to the Florida Building Code requirements that apply in Orange County.
Product guide
Product specifications for your Orlando project
Compare profiles, dimensions, material options and applications to prepare your order. Select a product below to explore its technical details.
9/16" Type S Form Deck
Permanent formwork for concrete slabs in floor and roof systems is the main job of Type S Form Deck, valued for its strength and easy installation. Contractors in Orlando can order it in gauges from 28 GA to 20 GA, manufactured to SDI and ANSI standards.
Dimensions and profile

| Property | Dimension |
|---|---|
| Profile Depth | 9/16 inches |
| Coverage Width | 36 inches |
| Rib Spacing | 2.57 inches (center to center) |
| Rib Height | 9/16 inches |
Rapid slab forming is the strength of Type S Form Deck: a shallow 9/16-inch rib depth and a standard 36-inch coverage width. The 2.57-inch rib spacing (center to center) creates a stable forming surface that minimizes concrete volume and maintains structural integrity.
Gauges and thicknesses
| Gauge | Bare steel thickness (in) | Weight (lbs/sq ft) | Typical applications |
|---|---|---|---|
| 28 | 0.0149 | 0.65 | Light-duty concrete formwork, low-load applications. |
| 26 | 0.0179 | 0.75 | Standard concrete slabs. |
| 24 | 0.0239 | 1.0 | Medium-duty floor and roof slabs. |
| 22 | 0.0299 | 1.25 | Medium-duty floors, multi-level buildings. |
| 20 | 0.0358 | 1.5 | Heavy-duty formwork, bridges. |
Type S Form Deck comes in gauges 28, 26, 24, 22, and 20. Gauges 28 and 26, the lighter ones, are economical for standard concrete slabs. Gauges 22 and 20 deliver greater strength for longer spans and heavier concrete loads, as in bridges and industrial floors.
Finishes and coatings
| Finish | Details |
|---|---|
| Galvanized G60 | Zinc coating of 0.6 oz/ft². Recommended for general environments. |
| Galvanized G90 | Zinc coating of 0.9 oz/ft². Ideal for highly corrosive environments. |
| Prime-Painted | Provides a base coat for additional protection or paint adhesion. |
| Bare Steel | Unfinished; typically for indoor use or controlled environments. |
Galvanized (G60 and G90) and prime-painted finishes are available on Type S Form Deck. Corrosion resistance comes from the galvanized coating, with G90 providing more protection in highly corrosive environments. G60 and G90 finishes conform to ASTM A653.
Material and finish options
Made from high-strength 80 KSI steel, Type S Form Deck can be ordered with a corrosion-resistant galvanized finish that meets SDI/ANSI standards, with a range of painted finishes for tailored aesthetics, or as bare steel for custom applications. All finishes are meant to boost durability and hold up in demanding environments.
Custom lengths
Smaller projects can use deck as short as 6′-0″, and larger constructions can take lengths up to 40′-0″. Tell us what your Orlando project needs and we will cut to it, aiming for the best fit with minimal waste.
9/16" Type S Form Deck features
Looking for a form deck with strong structure, efficient concrete forming, and corrosion-resistant finishes? Type S Form Deck is a cost-effective, versatile option for multi-level buildings, bridges, and tunnel work.
High Structural Strength
Built to carry a concrete slab, this deck keeps the structure strong and stable both while concrete is placed and after it sets.
Efficient Concrete Formwork
A fast-to-install form deck for slabs in multi-level buildings, bridges, and tunnels, cutting both labor time and material costs.
Galvanized or Prime-Painted Finish
Pick G60/G90 galvanized or prime-painted finishes for better durability and corrosion resistance in demanding environments.
Cost-Effective Solution
The lightweight, shallow profile uses less concrete and still gives a stable forming surface, which lowers total project cost.
Compliance with SDI Standards
Manufactured to Steel Deck Institute (SDI) and ANSI guidelines for quality and code compliance.
Versatile Design Options
Offered in gauges 28 through 20, with G60/G90 galvanized coatings and custom lengths from 6 to 40 feet.
Installation and connections
Installation practices
- Lay the deck perpendicular to the supports.
- At each support, fasten with pins, powder-actuated fasteners, or TEK screws.
- Lap the sidelaps and secure them with screws at 12" o.c.
Fasteners and attachments
- Pins or powder-actuated fasteners attach the deck to supports
- #10 TEK screws at 6" o.c. along edges and 12" o.c. at sidelaps
- Sidelaps joined with button punching or #10 TEK screws at 12" o.c.
Confirm the profile, gauge, span, loads and connections against your project drawings and the applicable product load tables before ordering.
Applications

Composite Floor Slabs
Well suited to forming slabs in multi-level buildings, bridges, and tunnels. A shallow rib profile keeps concrete volume down and gives a stable, efficient surface to pour on.

Bridge and Tunnel Formwork
Permanent concrete formwork for bridge decks and tunnel construction is a widespread use for Type S Form Deck, which supplies structural support as concrete goes in.
Standards and product documentation
Design and performance of Type S Form Deck follow SDI (Steel Deck Institute) specifications and ANSI standards, a point worth noting for any project in Orlando.
9/16" Type S Form Deck questions
Why use Type S form deck?
Type S form deck acts as permanent formwork for concrete slabs in floor and roof systems. It gives a stable base while concrete is placed and stays put after curing.
Is form deck the same as composite deck?
No. Form deck serves only as formwork, so the cured concrete slab carries the load independently. Composite deck bonds structurally with the concrete and shares load permanently.
What are the Type S form deck gauge options?
28, 26, 24, 22, and 20 GA, with thickness from 0.0149" to 0.0358".
Which fastening methods work for Type S form deck?
Pins, powder-actuated fasteners, or TEK screws attach the deck. Button punching or #10 TEK screws at 12" o.c. secure the sidelaps.
Does Type S form deck come in custom lengths?
Yes, in lengths from 6'-0" to 40'-0". That reduces waste and fits each project precisely, including work in Orlando.
1" Type HD Form Deck
Floors and roofs that need heavy-duty concrete formwork are served by Type HD Form Deck, with superior support and durability. Gauges span 26 GA to 20 GA, letting it manage greater loads and longer spans efficiently. It meets SDI and ANSI standards and comes in galvanized finishes like G60 and G90 for greater corrosion resistance, ready for Orlando jobs.
Dimensions and profile

| Property | Dimension |
|---|---|
| Profile Depth | 1 inch |
| Coverage Width | 36 inches |
| Rib Spacing | 4 inches (center to center) |
| Rib Height | 1 inch |
Type HD Form Deck measures 1 inch in rib depth with a standard 36-inch coverage width, a good match for heavy-duty concrete formwork in floors and roofs. Ribs are 4 inches apart (center to center), and a 39-inch overall material width means secure overlaps and excellent concrete support. The profile is built for greater loads at reduced material cost, offering strength and durability on demanding construction projects.
Gauges and thicknesses
| Gauge | Bare steel thickness (in) | Weight (lbs/sq ft) | Typical applications |
|---|---|---|---|
| 26 | 0.0179 | 0.75 | Light-duty concrete formwork, low-load floors. |
| 24 | 0.0239 | 1.0 | Standard floors, light industrial applications. |
| 22 | 0.0299 | 1.25 | Medium-duty floors, parking structures. |
| 20 | 0.0359 | 1.5 | Heavy-duty formwork, bridges, industrial slabs. |
Choose from gauges 26, 24, 22, and 20 for Type HD Form Deck. The lighter gauges, 26 and 24, are cost-effective for standard concrete slabs and moderate spans. Gauges 22 and 20 give superior strength and support over longer spans and heavier concrete loads, which makes them right for industrial floors, bridges, and parking structures.
Finishes and coatings
| Finish | Details |
|---|---|
| Galvanized G60 | Zinc coating of 0.6 oz/ft². Recommended for general environments. |
| Galvanized G90 | Zinc coating of 0.9 oz/ft². Ideal for highly corrosive environments. |
| Prime-Painted | Provides a base coat for additional protection or paint adhesion. |
| Bare Steel | Unfinished; typically for indoor use or controlled environments. |
Type HD Form Deck has multiple finish options for durability and long-term performance, including galvanized (G60 and G90) and prime-painted. Galvanized coating resists corrosion well, and G90, with its thicker zinc layer, protects in high-moisture or chemical environments. Prime paint adds a protective base coat. G60 and G90 finishes conform to ASTM A653 specifications.
Material and finish options
Our Type HD Deck is made of high-strength 80 KSI steel. You can choose a corrosion-resistant galvanized finish to SDI/ANSI standards, painted finishes for tailored aesthetics, or bare steel for custom applications. The finishes all exist to enhance durability and maintain performance in demanding environments.
Custom lengths
Pick deck lengths from 6′-0″ for smaller projects to 40′-0″ for large spans. We work to your specified dimensions, with the aim of an optimal fit and minimal waste.
1" Type HD Form Deck features
The 1" Type HD Form Deck brings heavy-duty load support, efficient concrete bonding, and enhanced durability to your projects. Industrial floors, bridge formwork, and other demanding structural applications are where it excels.
Heavy-Duty Load Support
Built for higher concrete loads, the Type HD Form Deck suits projects that demand superior strength and stability.
Efficient Concrete Bonding
A deep profile supports thicker concrete slabs, which improves load distribution and long-term performance.
Galvanized or Prime-Painted Finish
G60/G90 galvanized or prime-painted finishes improve durability and corrosion resistance.
Cost-Effective Formwork Solution
Suited to heavy-duty uses such as parking structures, bridge formwork, and industrial floors, and it adjusts readily to complex construction needs.
Compliance with SDI Standards
Meets Steel Deck Institute (SDI) and ANSI guidelines for quality and code compliance.
Versatile Gauge Options
26 GA to 20 GA are offered, giving flexibility for specific load requirements while keeping durability.
Installation and connections
Installation practices
- Lay the deck perpendicular to the supports.
- Fasten at each support with pins, powder-actuated fasteners, or TEK screws.
- Overlap the sidelaps and secure them with screws at 12" o.c.
Fasteners and attachments
- Deck is fixed to supports with pins or powder-actuated fasteners
- #10 TEK screws at 6" o.c. on edges and 12" o.c. for sidelaps
- Sidelaps joined by button punching or #10 TEK screws at 12" o.c.
Confirm the profile, gauge, span, loads and connections against your project drawings and the applicable product load tables before ordering.
Applications

Heavy Industrial Floor Systems
High-load equipment and machinery on heavy industrial floors get strong support from Type HD Form Deck. The durable design performs over the long term in demanding industrial settings.

Bridge and Highway Formwork
Bridge and highway construction commonly uses Type HD Form Deck as permanent formwork, where it supports heavy concrete loads during placement and adds lasting strength.
Standards and product documentation
Specifications from the SDI (Steel Deck Institute) apply to Type HD Form Deck, supporting high standards of design and performance.
1" Type HD Form Deck questions
What is the main purpose of Type HD Form Deck?
It is permanent formwork for heavy-duty concrete slabs, such as industrial floors, bridges, and infrastructure projects. Wet concrete rests on it during placement, and it stays in place after curing.
What gauge choices does Type HD Form Deck offer?
26 GA, 24 GA, 22 GA, and 20 GA, so you can match various load capacities and project needs.
Will Type HD Form Deck need temporary shoring?
Possibly. Temporary shoring may be required during installation to bear the deck and wet concrete weight until the slab fully cures.
Which fastening methods are recommended for Type HD Form Deck?
Pins, powder-actuated fasteners, or TEK screws are typical. Sidelaps are secured with button punching or screws at 12" o.c.
Can Type HD Form Deck be cut to custom lengths?
Yes, anywhere from 6'-0" to 40'-0". Waste stays minimal and each project gets a precise fit.
Type BI Inverted Form Deck
Type B Inverted Form Deck is permanent formwork for concrete slabs in floor and roof systems, offered in gauges 22 GA through 16 GA. It was designed for architectural ceilings where the soffit stays exposed, and Orlando schools, offices, and commercial buildings are typical uses.
Dimensions and profile

| Property | Dimension |
|---|---|
| Profile Depth | 1.5 inches |
| Coverage Width | 36 inches |
| Rib Spacing | 6 inches (center to center) |
| Rib Height | 1.5 inches |
Rib depth on Type BI Inverted Form Deck is 1.5 inches, and standard coverage width is 36 inches. The ribs point up when installed, which leaves a smooth flat soffit below that serves as an architectural ceiling without further finishes. A 6-inch rib spacing (center to center) maintains structural integrity and allows for concrete placement.
Gauges and thicknesses
| Gauge | Bare steel thickness (in) | Weight (lbs/sq ft) | Typical applications |
|---|---|---|---|
| 22 | 0.0299 | 1.25 | Light-duty floors and ceilings. |
| 20 | 0.0358 | 1.5 | Standard commercial floor systems. |
| 18 | 0.0474 | 2.6 | Heavy-duty applications, parking structures. |
| 16 | 0.0598 | 3.0 | Heavy load industrial floors. |
Type BI Inverted Form Deck is produced in gauges 22, 20, 18, and 16. Gauges 22 and 20, the lighter ones, are ideal for standard commercial applications, while 18 and 16 add strength for parking structures and heavy industrial floor systems.
Finishes and coatings
| Finish | Details |
|---|---|
| Galvanized G60 | Zinc coating of 0.6 oz/ft². Recommended for general environments. |
| Galvanized G90 | Zinc coating of 0.9 oz/ft². Ideal for highly corrosive environments. |
| Prime-Painted | Provides a base coat for additional protection or paint adhesion. |
| Bare Steel | Unfinished; typically for indoor use or controlled environments. |
Type BI Inverted Form Deck is offered with galvanized (G60 and G90) and prime-painted finishes. The galvanized coatings protect against corrosion, with G90 extending that protection to highly corrosive environments. G60 and G90 finishes conform to ASTM A653 specifications.
Material and finish options
Specify Type BI Inverted Form Deck in high-strength steel with a corrosion-resistant galvanized finish that meets ANSI/SDI standards. Painted finishes are available for tailored aesthetics, and bare steel is available for custom applications. Durability and steady performance are the goals behind each finish.
Custom lengths
We cut deck from 6′-0″ for smaller projects up to 40′-0″ for larger constructions. Our custom length service follows your requirements to deliver an optimal fit with minimal waste, whatever the size of the job in Orlando.
Type BI Inverted Form Deck features
Type BI Inverted Form Deck brings high structural strength, efficient formwork, and corrosion-resistant finishes to architectural ceilings, multi-level parking structures, and commercial floor systems that require exposed soffits.
High Structural Strength
Supports concrete and live loads while presenting an architecturally finished ceiling surface from below.
Efficient Formwork
Permanent formwork for concrete slabs means less labor and shorter construction time, since there are no temporary forms to strip.
Corrosion Resistance
Durable corrosion resistance in commercial settings comes from G60/G90 galvanized or prime-painted finishes.
Cost-Effective
Formwork and structural support in a single product trim material and labor costs on exposed ceiling work.
Compliance with Standards
Built to SDI and ANSI guidelines, giving quality and code compliance in every application.
Versatile Options
Several gauges (22–16 GA) and finishes address varied load requirements and architectural specifications.
Installation and connections
Installation practices
- Lay the deck perpendicular to the supports, ribs pointing upward.
- At each support, fasten with pins, powder-actuated fasteners, or TEK screws.
- Lap the sidelaps and secure them with button punching or screws at 12" o.c.
Fasteners and attachments
- Pins or powder-actuated fasteners hold the deck to the supports
- #10 TEK screws at 6" o.c. on edges
- Sidelaps fastened using button punching or #10 TEK screws at 12" o.c.
Confirm the profile, gauge, span, loads and connections against your project drawings and the applicable product load tables before ordering.
Applications

Industrial Flooring with Exposed Ceiling
Industrial floor systems get strong support, and the soffit below is architecturally finished and exposed. It is a good match for schools, offices, and civic buildings.

Multi-Level Parking Structures
Parking garage construction commonly uses it. It supplies permanent formwork and leaves a clean exposed underside, which reduces finishing costs.
Standards and product documentation
Type BI Inverted Form Deck meets SDI (Steel Deck Institute) specifications and ANSI standards, supporting solid design and performance on Orlando jobs.
Type BI Inverted Form Deck questions
Where is Type BI inverted form deck used?
Typical uses are architectural ceiling systems, multi-level parking structures, schools, offices, and other facilities that need an attractive exposed soffit.
What makes Type BI installation different from standard form deck?
It goes in inverted, with ribs pointing upward. The flat side then faces down as a finished ceiling, so no extra finishing materials are needed.
Which gauges are offered?
Gauges 22, 20, 18, and 16 GA, so you can match different structural requirements.
Which finishes can I choose?
G60 and G90 galvanized finishes give corrosion resistance, and prime-painted finishes add protection.
Is Type BI available in custom lengths for Orlando projects?
Yes. Custom lengths from 6'-0" to 40'-0" give a precise fit with little waste.
Planning your order
Metal Form Decks supply for Orlando
Send your project drawings or material list so our team can review quantities, profile requirements and cut lengths. We can help with takeoffs and shop drawings, then confirm pricing and delivery options for your Orlando project.
Send your drawings for a quoteWhat to include in your quote request
- The profile, gauge and finish shown in your specifications.
- Quantities and lengths, or the drawings we can take them off from.
- The Orlando job site address, your target delivery date and any access limits.
- Load tables, attachment details or other documents your engineer specified.
How We Work
We Guide You Through the Process
From manufacturing to delivery, we ensure precision, efficiency, and compliance with industry standards.
Takeoff and Shop Drawings Services
We provide specialized takeoff services for accurate quotations and detailed shop drawings to produce optimized cutting lists for sheets, ensuring efficient execution and waste-free outcomes in your projects.
Manufacture
We manufacture metal decks to SDI and ANSI standards, ensuring strength, durability, and compliance. We provide custom lengths and high-precision fabrication for optimized performance in roof, floor, and form deck applications.
Swift Deliveries & Nationwide Reach
While based in South Florida, we serve clients nationwide, ensuring quality, efficiency, and timely deliveries across the U.S., reflecting our commitment to excellence without boundaries.
Frequently Asked Questions
Do you supply form deck in Orlando?
Yes. We deliver form deck to Orlando with same-day or next-day service. Call 305-760-2575 for availability.
What is the difference between form deck and composite deck?
Form deck acts as temporary or permanent formwork the concrete carries the load after curing. Composite deck bonds structurally with the concrete to share load permanently.
What role does form deck play?
As formwork, temporary or permanent, it supports concrete slabs. The deck takes the weight of wet concrete while it is poured and cures, offering a stable base for floor and roof slabs.
Is form deck the same as composite deck?
No. Composite deck is designed to bond with concrete and take part structurally in the finished slab. Form deck acts only as formwork, and once cured, the slab carries the load by itself.
How does form deck help in multi-level construction?
Eliminating temporary wood forms speeds up the work and reduces waste. It gives a consistent, lightweight formwork system, and it can be left in place after the concrete cures.
Which gauges and finishes do you stock?
Form deck comes in gauges from 16 to 28, with G60 and G90 galvanized finishes that resist corrosion. Custom lengths from 6 to 40 feet are available for Orlando orders.
