SDI Member · ANSI/SDI compliant
Metal form deck supplier in Sarasota
Miami-produced metal form deck in Sarasota the fundamental support for your project needs.

Local Metal Form Decks supply for Sarasota
Builders in Sarasota order Metal Form Decks directly from Miami Metal Deck for commercial and industrial projects throughout Sarasota County and the Southwest Florida region. Deliveries to Sarasota leave our Miami Gardens facility on a schedule set with your team, with 1-day service available to major Florida cities.
Coastal conditions around Sarasota make corrosion protection a priority, and G90 galvanized steel is a common choice there. Our team checks the specified finish before we quote. Projects in Sarasota follow the Florida Building Code wind-load requirements, so we work directly from your engineer's deck schedule, gauges and attachment details.
Product guide
Product specifications for your Sarasota project
Compare profiles, dimensions, material options and applications to prepare your order. Select a product below to explore its technical details.
9/16" Type S Form Deck
Permanent formwork for concrete slabs in floor and roof systems is the main job of Type S Form Deck, valued for its strength and easy installation. Contractors in Sarasota can order it in gauges from 28 GA to 20 GA, manufactured to SDI and ANSI standards.
Dimensions and profile

| Property | Dimension |
|---|---|
| Profile Depth | 9/16 inches |
| Coverage Width | 36 inches |
| Rib Spacing | 2.57 inches (center to center) |
| Rib Height | 9/16 inches |
Rapid slab forming is the strength of Type S Form Deck: a shallow 9/16-inch rib depth and a standard 36-inch coverage width. The 2.57-inch rib spacing (center to center) creates a stable forming surface that minimizes concrete volume and maintains structural integrity.
Gauges and thicknesses
| Gauge | Bare steel thickness (in) | Weight (lbs/sq ft) | Typical applications |
|---|---|---|---|
| 28 | 0.0149 | 0.65 | Light-duty concrete formwork, low-load applications. |
| 26 | 0.0179 | 0.75 | Standard concrete slabs. |
| 24 | 0.0239 | 1.0 | Medium-duty floor and roof slabs. |
| 22 | 0.0299 | 1.25 | Medium-duty floors, multi-level buildings. |
| 20 | 0.0358 | 1.5 | Heavy-duty formwork, bridges. |
Type S Form Deck comes in gauges 28, 26, 24, 22, and 20. Gauges 28 and 26, the lighter ones, are economical for standard concrete slabs. Gauges 22 and 20 deliver greater strength for longer spans and heavier concrete loads, as in bridges and industrial floors.
Finishes and coatings
| Finish | Details |
|---|---|
| Galvanized G60 | Zinc coating of 0.6 oz/ft². Recommended for general environments. |
| Galvanized G90 | Zinc coating of 0.9 oz/ft². Ideal for highly corrosive environments. |
| Prime-Painted | Provides a base coat for additional protection or paint adhesion. |
| Bare Steel | Unfinished; typically for indoor use or controlled environments. |
Galvanized (G60 and G90) and prime-painted finishes are available on Type S Form Deck. Corrosion resistance comes from the galvanized coating, with G90 providing more protection in highly corrosive environments. G60 and G90 finishes conform to ASTM A653.
Material and finish options
Our Type S Form Deck is made from high-strength 80 KSI steel. Choose a corrosion-resistant galvanized finish that meets SDI/ANSI standards, one of several painted finishes for a tailored look, or bare steel for custom applications. Every finish is meant to improve durability and keep performance steady in demanding environments.
Custom lengths
Deck lengths start at 6′-0″ for smaller jobs and run up to 40′-0″ for large builds. We cut to the length you specify for projects in Sarasota and elsewhere, so the deck fits properly and leftover material stays low.
9/16" Type S Form Deck features
Looking for a form deck with strong structure, efficient concrete forming, and corrosion-resistant finishes? Type S Form Deck is a cost-effective, versatile option for multi-level buildings, bridges, and tunnel work.
High Structural Strength
Designed to support concrete slabs, giving stability and structural strength during and after concrete placement.
Efficient Concrete Formwork
This quick-to-build form deck suits slab forming in multi-level buildings, bridges, and tunnels, and it reduces labor time and material costs.
Galvanized or Prime-Painted Finish
G60/G90 galvanized or prime-painted finishes add durability and corrosion resistance where conditions are demanding.
Cost-Effective Solution
A lightweight, shallow profile limits concrete use while offering a stable forming surface, so overall project costs drop.
Compliance with SDI Standards
Conforms to Steel Deck Institute (SDI) and ANSI guidelines, supporting quality and code compliance.
Versatile Design Options
Gauges 28 through 20, G60/G90 galvanized coatings, and custom lengths between 6 and 40 feet.
Installation and connections
Installation practices
- Lay the deck perpendicular to the supports.
- At each support, fasten with pins, powder-actuated fasteners, or TEK screws.
- Lap the sidelaps and secure them with screws at 12" o.c.
Fasteners and attachments
- Pins or powder-actuated fasteners attach the deck to supports
- #10 TEK screws at 6" o.c. along edges and 12" o.c. at sidelaps
- Sidelaps joined with button punching or #10 TEK screws at 12" o.c.
Confirm the profile, gauge, span, loads and connections against your project drawings and the applicable product load tables before ordering.
Applications

Composite Floor Slabs
Slab forming in multi-level buildings, bridges, and tunnels is an ideal fit. The shallow rib profile cuts concrete volume and provides an efficient, stable forming surface.

Bridge and Tunnel Formwork
Type S Form Deck sees wide use as permanent concrete formwork in bridge decks and tunnels, where it supports the structure during concrete placement.
Standards and product documentation
Type S Form Deck is built to SDI (Steel Deck Institute) specifications and ANSI standards, which supports consistent design and performance for Sarasota projects.
9/16" Type S Form Deck questions
What is Type S form deck used for?
It is permanent formwork for concrete slabs in floor and roof systems. It gives a stable base while concrete is placed and stays in place once the concrete has cured.
How does form deck differ from composite deck?
Form deck is only formwork, and the cured concrete slab carries the load on its own. Composite deck bonds structurally with the concrete, so the two share the load permanently.
Which gauges does Type S form deck come in?
Gauges 28, 26, 24, 22, and 20 GA, with thicknesses from 0.0149" to 0.0358".
How should Type S form deck be fastened?
Use pins, powder-actuated fasteners, or TEK screws. Sidelaps are secured by button punching or #10 TEK screws at 12" o.c.
Is custom-length Type S form deck available in Sarasota?
Yes. Custom lengths run from 6'-0" to 40'-0", which cuts material waste and gives each project a precise fit.
1" Type HD Form Deck
Floors and roofs that need heavy-duty concrete formwork are served by Type HD Form Deck, with superior support and durability. Gauges span 26 GA to 20 GA, letting it manage greater loads and longer spans efficiently. It meets SDI and ANSI standards and comes in galvanized finishes like G60 and G90 for greater corrosion resistance, ready for Sarasota jobs.
Dimensions and profile

| Property | Dimension |
|---|---|
| Profile Depth | 1 inch |
| Coverage Width | 36 inches |
| Rib Spacing | 4 inches (center to center) |
| Rib Height | 1 inch |
Heavy-duty concrete formwork in floors and roofs is where Type HD Form Deck fits best, with a 1-inch rib depth and 36-inch coverage width. Rib spacing is 4 inches (center to center), and the 39-inch overall material width makes for secure overlaps and excellent concrete support. The profile takes on greater loads and reduces material costs, giving strength and durability for demanding projects.
Gauges and thicknesses
| Gauge | Bare steel thickness (in) | Weight (lbs/sq ft) | Typical applications |
|---|---|---|---|
| 26 | 0.0179 | 0.75 | Light-duty concrete formwork, low-load floors. |
| 24 | 0.0239 | 1.0 | Standard floors, light industrial applications. |
| 22 | 0.0299 | 1.25 | Medium-duty floors, parking structures. |
| 20 | 0.0359 | 1.5 | Heavy-duty formwork, bridges, industrial slabs. |
Type HD Form Deck comes in gauges 26, 24, 22, and 20. Gauges 26 and 24 are the lighter, cost-effective choices for standard concrete slabs and moderate spans. For longer spans and heavier concrete loads, such as industrial floors, bridges, and parking structures, gauges 22 and 20 give superior strength and support.
Finishes and coatings
| Finish | Details |
|---|---|
| Galvanized G60 | Zinc coating of 0.6 oz/ft². Recommended for general environments. |
| Galvanized G90 | Zinc coating of 0.9 oz/ft². Ideal for highly corrosive environments. |
| Prime-Painted | Provides a base coat for additional protection or paint adhesion. |
| Bare Steel | Unfinished; typically for indoor use or controlled environments. |
For durability and long-term performance, Type HD Form Deck is supplied in galvanized (G60 and G90) and prime-painted finishes. Galvanizing gives excellent corrosion resistance, and G90 has a thicker zinc layer to protect in high-moisture or chemical environments. The prime-painted finish adds a protective base coat. G60 and G90 finishes conform to ASTM A653 specifications.
Material and finish options
Our Type HD Deck is made of high-strength 80 KSI steel. You can choose a corrosion-resistant galvanized finish to SDI/ANSI standards, painted finishes for tailored aesthetics, or bare steel for custom applications. The finishes all exist to enhance durability and maintain performance in demanding environments.
Custom lengths
Lengths range from 6′-0″ for smaller projects to 40′-0″ for extensive spans on larger ones. Our custom length service is designed around what you specify, for an optimal fit with minimal waste on Sarasota projects and others.
1" Type HD Form Deck features
Our 1" Type HD Form Deck offers heavy-duty load support, efficient concrete bonding, and improved durability. It suits industrial floors, bridge formwork, and other demanding structural applications.
Heavy-Duty Load Support
Higher concrete loads are what Type HD Form Deck is engineered for, making it ideal when superior strength and stability matter.
Efficient Concrete Bonding
The deep profile carries thicker concrete slabs, which spreads load better and supports long-term performance.
Galvanized or Prime-Painted Finish
G60/G90 galvanized or prime-painted finishes are available for durability and corrosion resistance.
Cost-Effective Formwork Solution
A fit for heavy-duty work such as parking structures, bridge formwork, and industrial floors, and it adapts easily to complex construction needs.
Compliance with SDI Standards
It meets Steel Deck Institute (SDI) and ANSI guidelines, so quality and code compliance are assured.
Versatile Gauge Options
Gauges 26 GA to 20 GA let you meet specific load requirements without losing durability.
Installation and connections
Installation practices
- Run the deck perpendicular to the supports.
- At each support, secure the deck with pins, powder-actuated fasteners, or TEK screws.
- Overlap the sidelaps and fasten with screws at 12" o.c.
Fasteners and attachments
- Pins or powder-actuated fasteners secure the deck to the supports
- #10 TEK screws at 6" o.c. on edges and 12" o.c. for sidelaps
- Sidelaps attached through button punching or #10 TEK screws at 12" o.c.
Confirm the profile, gauge, span, loads and connections against your project drawings and the applicable product load tables before ordering.
Applications

Heavy Industrial Floor Systems
For heavy industrial floors, Type HD Form Deck supports high-load equipment and machinery. Its durable design keeps performing in demanding industrial environments.

Bridge and Highway Formwork
Type HD Form Deck is a common permanent formwork in bridge and highway construction. It carries heavy concrete loads during placement and adds lasting strength to the structure.
Standards and product documentation
Specifications from the SDI (Steel Deck Institute) apply to Type HD Form Deck, supporting high standards of design and performance.
1" Type HD Form Deck questions
What is Type HD Form Deck mainly used for?
Mostly as permanent formwork for heavy-duty concrete slabs in industrial floors, bridges, and infrastructure projects. It holds wet concrete during placement and stays in place after curing.
Which gauges does Type HD Form Deck come in?
26 GA, 24 GA, 22 GA, and 20 GA, which cover a range of load capacities and project requirements.
Is temporary shoring needed with Type HD Form Deck?
It can be. Temporary shoring may be required during installation to carry the weight of the deck and wet concrete until the slab has fully cured.
How is Type HD Form Deck usually fastened?
With pins, powder-actuated fasteners, or TEK screws. Sidelaps are secured by button punching or screws at 12" o.c.
Is Type HD Form Deck available in custom lengths in Sarasota?
Yes, from 6'-0" to 40'-0". That keeps material waste low and gives each project a precise fit.
Type BI Inverted Form Deck
Type B Inverted Form Deck is permanent formwork for concrete slabs in floor and roof systems, offered in gauges 22 GA through 16 GA. It was designed for architectural ceilings where the soffit stays exposed, and Sarasota schools, offices, and commercial buildings are typical uses.
Dimensions and profile

| Property | Dimension |
|---|---|
| Profile Depth | 1.5 inches |
| Coverage Width | 36 inches |
| Rib Spacing | 6 inches (center to center) |
| Rib Height | 1.5 inches |
Rib depth is 1.5 inches and standard coverage width is 36 inches on Type BI Inverted Form Deck. Install it with the ribs pointing upward and a smooth flat soffit remains exposed underneath, producing an architectural ceiling with no additional finishes. Ribs are 6 inches apart (center to center), which preserves structural integrity while allowing for concrete placement.
Gauges and thicknesses
| Gauge | Bare steel thickness (in) | Weight (lbs/sq ft) | Typical applications |
|---|---|---|---|
| 22 | 0.0299 | 1.25 | Light-duty floors and ceilings. |
| 20 | 0.0358 | 1.5 | Standard commercial floor systems. |
| 18 | 0.0474 | 2.6 | Heavy-duty applications, parking structures. |
| 16 | 0.0598 | 3.0 | Heavy load industrial floors. |
The gauge lineup for Type BI Inverted Form Deck is 22, 20, 18, and 16. Standard commercial applications suit the lighter gauges (22 and 20). When you need more strength for parking structures or heavy industrial floor systems, use gauges 18 and 16.
Finishes and coatings
| Finish | Details |
|---|---|
| Galvanized G60 | Zinc coating of 0.6 oz/ft². Recommended for general environments. |
| Galvanized G90 | Zinc coating of 0.9 oz/ft². Ideal for highly corrosive environments. |
| Prime-Painted | Provides a base coat for additional protection or paint adhesion. |
| Bare Steel | Unfinished; typically for indoor use or controlled environments. |
Galvanized (G60 and G90) and prime-painted finishes are available for Type BI Inverted Form Deck. Galvanizing resists corrosion, and G90 adds protection in highly corrosive environments. G60 and G90 finishes conform to ASTM A653.
Material and finish options
Specify Type BI Inverted Form Deck in high-strength steel with a corrosion-resistant galvanized finish that meets ANSI/SDI standards. Painted finishes are available for tailored aesthetics, and bare steel is available for custom applications. Durability and steady performance are the goals behind each finish.
Custom lengths
Need 6′-0″ lengths for a small project or spans up to 40′-0″ for a large one? We handle both. Our custom length service is built around your requirements for Sarasota and beyond, so the deck fits optimally and waste stays minimal.
Type BI Inverted Form Deck features
Type BI Inverted Form Deck offers high structural strength, efficient formwork, and corrosion-resistant finishes. It fits architectural ceilings, multi-level parking structures, and commercial floor systems that need exposed soffits.
High Structural Strength
Carries concrete and live loads and also gives you a finished, exposed ceiling surface.
Efficient Formwork
As permanent formwork for concrete slabs, it saves labor and construction time because no temporary forms need to be removed.
Corrosion Resistance
G60/G90 galvanized or prime-painted finishes hold up against corrosion in commercial environments.
Cost-Effective
One product handles both formwork and structural support, which lowers material and labor costs for exposed ceilings.
Compliance with Standards
SDI and ANSI guidelines are met, so quality and code compliance carry across applications.
Versatile Options
A choice of gauges (22–16 GA) and finishes covers different load requirements and architectural specifications.
Installation and connections
Installation practices
- Set the deck perpendicular to the supports with the ribs pointing upward.
- Use pins, powder-actuated fasteners, or TEK screws to fasten at each support.
- Lap sidelaps and secure them at 12" o.c. with button punching or screws.
Fasteners and attachments
- Pins or powder-actuated fasteners secure the deck to supports
- #10 TEK screws at 6" o.c. on edges
- Sidelaps attached through button punching or #10 TEK screws at 12" o.c.
Confirm the profile, gauge, span, loads and connections against your project drawings and the applicable product load tables before ordering.
Applications

Industrial Flooring with Exposed Ceiling
Strong support for industrial floor systems plus an architecturally finished exposed soffit, which suits schools, offices, and civic buildings.

Multi-Level Parking Structures
A frequent choice for parking garages, giving permanent formwork and a clean exposed underside that cuts finishing costs.
Standards and product documentation
Type BI Inverted Form Deck meets SDI (Steel Deck Institute) specifications and ANSI standards, supporting solid design and performance on Sarasota jobs.
Type BI Inverted Form Deck questions
Which projects use Type BI inverted form deck?
It appears in architectural ceiling systems, multi-level parking structures, schools, offices, and facilities needing an attractive exposed soffit.
What is different about installing Type BI?
The deck is installed inverted, ribs up, so the flat side faces down as a finished ceiling surface and needs no added finishing materials.
What gauge options exist?
Gauges 22, 20, 18, and 16 GA cover a range of structural requirements.
What finish options are there?
Corrosion resistance comes from G60 and G90 galvanized finishes, and prime-painted finishes add protection.
Does Type BI come in custom lengths for Sarasota jobs?
Yes, from 6'-0" to 40'-0", so each project gets a precise fit with minimal waste.
Ordering made simple
Metal Form Decks for Sarasota construction
Start with your plans or a takeoff. We review the profile, gauge, quantities and lengths, help with shop drawings when you need them, and come back with pricing and a delivery plan for Sarasota.
Send your project requirementsWhat we need to quote your project
- Product profile or series, dimensions, gauge and specified finish.
- Required quantities, sheet or member lengths, and project drawings.
- Project address in Sarasota, delivery date and site access requirements.
- Any specified load tables, connection details or supporting documentation.
How We Work
We Guide You Through the Process
From manufacturing to delivery, we ensure precision, efficiency, and compliance with industry standards.
Takeoff and Shop Drawings Services
We provide specialized takeoff services for accurate quotations and detailed shop drawings to produce optimized cutting lists for sheets, ensuring efficient execution and waste-free outcomes in your projects.
Manufacture
We manufacture metal decks to SDI and ANSI standards, ensuring strength, durability, and compliance. We provide custom lengths and high-precision fabrication for optimized performance in roof, floor, and form deck applications.
Swift Deliveries & Nationwide Reach
While based in South Florida, we serve clients nationwide, ensuring quality, efficiency, and timely deliveries across the U.S., reflecting our commitment to excellence without boundaries.
Frequently Asked Questions
Do you supply form deck in Sarasota?
Yes. We deliver form deck to Sarasota with same-day or next-day service. Call 305-760-2575 for availability.
What is the difference between form deck and composite deck?
Form deck acts as temporary or permanent formwork the concrete carries the load after curing. Composite deck bonds structurally with the concrete to share load permanently.
What is form deck for?
Form deck is temporary or permanent structural formwork for concrete slabs. It carries the weight of wet concrete during pouring and curing, giving floor and roof slabs a stable base.
How does form deck compare with composite deck?
Composite deck bonds with concrete and acts as a structural element in the finished slab. Form deck is only formwork, so after curing the concrete slab carries the load on its own.
What benefits does form deck bring to multi-level construction?
It speeds up construction by removing the need for temporary wood forms and cuts material waste. It is also a consistent, lightweight formwork system that can stay in place after the concrete cures.
Which gauges and finishes does form deck come in?
Form deck is offered in gauges 16 to 28, with G60 and G90 galvanized finishes for corrosion resistance. Custom lengths of 6 to 40 feet are available.
