SDI Member · ANSI/SDI compliant
Metal form deck supplier in Miami
Miami-produced metal form deck in Miami the fundamental support for your project needs.

Supplying Metal Form Decks in Miami
Miami Metal Deck supplies Metal Form Decks to contractors, erectors and fabricators building in Miami and across Miami-Dade County and the South Florida region. Our Miami Gardens facility is a short drive from Miami: same-day pickup and same-day South Florida delivery are available for stock items.
Salt air and humidity near the coast in Miami favor heavier zinc coatings such as G90 galvanized. We match the finish to what your drawings call for. Projects in Miami are designed to the Florida Building Code's High-Velocity Hurricane Zone (HVHZ) provisions for Miami-Dade County, so we work directly from your engineer's deck schedule and attachment details.
Product guide
Product specifications for your Miami project
Compare profiles, dimensions, material options and applications to prepare your order. Select a product below to explore its technical details.
9/16" Type S Form Deck
Slab construction in floors and roofs relies on Type S Form Deck as permanent formwork, thanks to its strength and straightforward installation. Gauges run from 28 GA to 20 GA, and manufacturing meets SDI and ANSI standards. It is a regular choice for Miami concrete work.
Dimensions and profile

| Property | Dimension |
|---|---|
| Profile Depth | 9/16 inches |
| Coverage Width | 36 inches |
| Rib Spacing | 2.57 inches (center to center) |
| Rib Height | 9/16 inches |
Type S Form Deck has a shallow 9/16-inch rib depth and a standard coverage width of 36 inches, which suits fast concrete slab forming. With ribs spaced 2.57 inches (center to center), it gives a stable forming surface that holds concrete volume down without giving up structural integrity.
Gauges and thicknesses
| Gauge | Bare steel thickness (in) | Weight (lbs/sq ft) | Typical applications |
|---|---|---|---|
| 28 | 0.0149 | 0.65 | Light-duty concrete formwork, low-load applications. |
| 26 | 0.0179 | 0.75 | Standard concrete slabs. |
| 24 | 0.0239 | 1.0 | Medium-duty floor and roof slabs. |
| 22 | 0.0299 | 1.25 | Medium-duty floors, multi-level buildings. |
| 20 | 0.0358 | 1.5 | Heavy-duty formwork, bridges. |
Type S Form Deck comes in gauges 28, 26, 24, 22, and 20. Gauges 28 and 26, the lighter ones, are economical for standard concrete slabs. Gauges 22 and 20 deliver greater strength for longer spans and heavier concrete loads, as in bridges and industrial floors.
Finishes and coatings
| Finish | Details |
|---|---|
| Galvanized G60 | Zinc coating of 0.6 oz/ft². Recommended for general environments. |
| Galvanized G90 | Zinc coating of 0.9 oz/ft². Ideal for highly corrosive environments. |
| Prime-Painted | Provides a base coat for additional protection or paint adhesion. |
| Bare Steel | Unfinished; typically for indoor use or controlled environments. |
Galvanized (G60 and G90) and prime-painted finishes are available on Type S Form Deck. Corrosion resistance comes from the galvanized coating, with G90 providing more protection in highly corrosive environments. G60 and G90 finishes conform to ASTM A653.
Material and finish options
Our Type S Form Deck is made from high-strength 80 KSI steel. Choose a corrosion-resistant galvanized finish that meets SDI/ANSI standards, one of several painted finishes for a tailored look, or bare steel for custom applications. Every finish is meant to improve durability and keep performance steady in demanding environments.
Custom lengths
Deck lengths start at 6′-0″ for smaller jobs and run up to 40′-0″ for large builds. We cut to the length you specify for projects in Miami and elsewhere, so the deck fits properly and leftover material stays low.
9/16" Type S Form Deck features
Looking for a form deck with strong structure, efficient concrete forming, and corrosion-resistant finishes? Type S Form Deck is a cost-effective, versatile option for multi-level buildings, bridges, and tunnel work.
High Structural Strength
Designed to support concrete slabs, giving stability and structural strength during and after concrete placement.
Efficient Concrete Formwork
This quick-to-build form deck suits slab forming in multi-level buildings, bridges, and tunnels, and it reduces labor time and material costs.
Galvanized or Prime-Painted Finish
G60/G90 galvanized or prime-painted finishes add durability and corrosion resistance where conditions are demanding.
Cost-Effective Solution
A lightweight, shallow profile limits concrete use while offering a stable forming surface, so overall project costs drop.
Compliance with SDI Standards
Conforms to Steel Deck Institute (SDI) and ANSI guidelines, supporting quality and code compliance.
Versatile Design Options
Gauges 28 through 20, G60/G90 galvanized coatings, and custom lengths between 6 and 40 feet.
Installation and connections
Installation practices
- Lay the deck perpendicular to the supports.
- At each support, fasten with pins, powder-actuated fasteners, or TEK screws.
- Lap the sidelaps and secure them with screws at 12" o.c.
Fasteners and attachments
- Pins or powder-actuated fasteners attach the deck to supports
- #10 TEK screws at 6" o.c. along edges and 12" o.c. at sidelaps
- Sidelaps joined with button punching or #10 TEK screws at 12" o.c.
Confirm the profile, gauge, span, loads and connections against your project drawings and the applicable product load tables before ordering.
Applications

Composite Floor Slabs
Slab forming in multi-level buildings, bridges, and tunnels is an ideal fit. The shallow rib profile cuts concrete volume and provides an efficient, stable forming surface.

Bridge and Tunnel Formwork
Type S Form Deck sees wide use as permanent concrete formwork in bridge decks and tunnels, where it supports the structure during concrete placement.
Standards and product documentation
SDI (Steel Deck Institute) specifications and ANSI standards govern Type S Form Deck, supporting high standards of design and performance.
9/16" Type S Form Deck questions
Why use Type S form deck?
Type S form deck acts as permanent formwork for concrete slabs in floor and roof systems. It gives a stable base while concrete is placed and stays put after curing.
Is form deck the same as composite deck?
No. Form deck serves only as formwork, so the cured concrete slab carries the load independently. Composite deck bonds structurally with the concrete and shares load permanently.
What are the Type S form deck gauge options?
28, 26, 24, 22, and 20 GA, with thickness from 0.0149" to 0.0358".
Which fastening methods work for Type S form deck?
Pins, powder-actuated fasteners, or TEK screws attach the deck. Button punching or #10 TEK screws at 12" o.c. secure the sidelaps.
Does Type S form deck come in custom lengths?
Yes, in lengths from 6'-0" to 40'-0". That reduces waste and fits each project precisely, including work in Miami.
1" Type HD Form Deck
Heavy-duty concrete formwork in floors and roofs is the purpose of Type HD Form Deck, which delivers strong support and durability. Gauges run from 26 GA to 20 GA, so it copes with greater loads and longer spans. SDI and ANSI standards apply, and galvanized finishes such as G60 and G90 improve corrosion resistance for Miami projects.
Dimensions and profile

| Property | Dimension |
|---|---|
| Profile Depth | 1 inch |
| Coverage Width | 36 inches |
| Rib Spacing | 4 inches (center to center) |
| Rib Height | 1 inch |
Type HD Form Deck measures 1 inch in rib depth with a standard 36-inch coverage width, a good match for heavy-duty concrete formwork in floors and roofs. Ribs are 4 inches apart (center to center), and a 39-inch overall material width means secure overlaps and excellent concrete support. The profile is built for greater loads at reduced material cost, offering strength and durability on demanding construction projects.
Gauges and thicknesses
| Gauge | Bare steel thickness (in) | Weight (lbs/sq ft) | Typical applications |
|---|---|---|---|
| 26 | 0.0179 | 0.75 | Light-duty concrete formwork, low-load floors. |
| 24 | 0.0239 | 1.0 | Standard floors, light industrial applications. |
| 22 | 0.0299 | 1.25 | Medium-duty floors, parking structures. |
| 20 | 0.0359 | 1.5 | Heavy-duty formwork, bridges, industrial slabs. |
Type HD Form Deck comes in gauges 26, 24, 22, and 20. Gauges 26 and 24 are the lighter, cost-effective choices for standard concrete slabs and moderate spans. For longer spans and heavier concrete loads, such as industrial floors, bridges, and parking structures, gauges 22 and 20 give superior strength and support.
Finishes and coatings
| Finish | Details |
|---|---|
| Galvanized G60 | Zinc coating of 0.6 oz/ft². Recommended for general environments. |
| Galvanized G90 | Zinc coating of 0.9 oz/ft². Ideal for highly corrosive environments. |
| Prime-Painted | Provides a base coat for additional protection or paint adhesion. |
| Bare Steel | Unfinished; typically for indoor use or controlled environments. |
For durability and long-term performance, Type HD Form Deck is supplied in galvanized (G60 and G90) and prime-painted finishes. Galvanizing gives excellent corrosion resistance, and G90 has a thicker zinc layer to protect in high-moisture or chemical environments. The prime-painted finish adds a protective base coat. G60 and G90 finishes conform to ASTM A653 specifications.
Material and finish options
High-strength 80 KSI steel is the base of Type HD Deck. A corrosion-resistant galvanized finish meeting SDI/ANSI standards is available, along with a variety of painted finishes for tailored aesthetics and bare steel for custom applications. Each is designed to improve durability and maintain performance in demanding environments.
Custom lengths
Whether the job is small and needs 6′-0″ lengths or large and needs spans up to 40′-0″, we can supply it. The custom length service follows your requirements, so the deck fits well and little is wasted. Contractors in Miami can order to the foot.
1" Type HD Form Deck features
The 1" Type HD Form Deck brings heavy-duty load support, efficient concrete bonding, and enhanced durability to your projects. Industrial floors, bridge formwork, and other demanding structural applications are where it excels.
Heavy-Duty Load Support
Higher concrete loads are what Type HD Form Deck is engineered for, making it ideal when superior strength and stability matter.
Efficient Concrete Bonding
The deep profile carries thicker concrete slabs, which spreads load better and supports long-term performance.
Galvanized or Prime-Painted Finish
G60/G90 galvanized or prime-painted finishes are available for durability and corrosion resistance.
Cost-Effective Formwork Solution
A fit for heavy-duty work such as parking structures, bridge formwork, and industrial floors, and it adapts easily to complex construction needs.
Compliance with SDI Standards
It meets Steel Deck Institute (SDI) and ANSI guidelines, so quality and code compliance are assured.
Versatile Gauge Options
Gauges 26 GA to 20 GA let you meet specific load requirements without losing durability.
Installation and connections
Installation practices
- Lay the deck perpendicular to the supports.
- Fasten at each support with pins, powder-actuated fasteners, or TEK screws.
- Overlap the sidelaps and secure them with screws at 12" o.c.
Fasteners and attachments
- Pins or powder-actuated fasteners secure the deck to the supports
- #10 TEK screws at 6" o.c. on edges and 12" o.c. for sidelaps
- Sidelaps attached through button punching or #10 TEK screws at 12" o.c.
Confirm the profile, gauge, span, loads and connections against your project drawings and the applicable product load tables before ordering.
Applications

Heavy Industrial Floor Systems
High-load equipment and machinery on heavy industrial floors get strong support from Type HD Form Deck. The durable design performs over the long term in demanding industrial settings.

Bridge and Highway Formwork
Bridge and highway construction commonly uses Type HD Form Deck as permanent formwork, where it supports heavy concrete loads during placement and adds lasting strength.
Standards and product documentation
Specifications from the SDI (Steel Deck Institute) apply to Type HD Form Deck, supporting high standards of design and performance.
1" Type HD Form Deck questions
What is Type HD Form Deck mainly used for?
Mostly as permanent formwork for heavy-duty concrete slabs in industrial floors, bridges, and infrastructure projects. It holds wet concrete during placement and stays in place after curing.
Which gauges does Type HD Form Deck come in?
26 GA, 24 GA, 22 GA, and 20 GA, which cover a range of load capacities and project requirements.
Is temporary shoring needed with Type HD Form Deck?
It can be. Temporary shoring may be required during installation to carry the weight of the deck and wet concrete until the slab has fully cured.
How is Type HD Form Deck usually fastened?
With pins, powder-actuated fasteners, or TEK screws. Sidelaps are secured by button punching or screws at 12" o.c.
Is Type HD Form Deck available in custom lengths in Miami?
Yes, from 6'-0" to 40'-0". That keeps material waste low and gives each project a precise fit.
Type BI Inverted Form Deck
Architectural ceilings with an exposed soffit are what Type B Inverted Form Deck is designed for. It works as permanent formwork for concrete slabs in floors and roofs, in gauges 22 GA through 16 GA, and is a natural fit for Miami commercial and institutional buildings.
Dimensions and profile

| Property | Dimension |
|---|---|
| Profile Depth | 1.5 inches |
| Coverage Width | 36 inches |
| Rib Spacing | 6 inches (center to center) |
| Rib Height | 1.5 inches |
Rib depth on Type BI Inverted Form Deck is 1.5 inches, and standard coverage width is 36 inches. The ribs point up when installed, which leaves a smooth flat soffit below that serves as an architectural ceiling without further finishes. A 6-inch rib spacing (center to center) maintains structural integrity and allows for concrete placement.
Gauges and thicknesses
| Gauge | Bare steel thickness (in) | Weight (lbs/sq ft) | Typical applications |
|---|---|---|---|
| 22 | 0.0299 | 1.25 | Light-duty floors and ceilings. |
| 20 | 0.0358 | 1.5 | Standard commercial floor systems. |
| 18 | 0.0474 | 2.6 | Heavy-duty applications, parking structures. |
| 16 | 0.0598 | 3.0 | Heavy load industrial floors. |
The gauge lineup for Type BI Inverted Form Deck is 22, 20, 18, and 16. Standard commercial applications suit the lighter gauges (22 and 20). When you need more strength for parking structures or heavy industrial floor systems, use gauges 18 and 16.
Finishes and coatings
| Finish | Details |
|---|---|
| Galvanized G60 | Zinc coating of 0.6 oz/ft². Recommended for general environments. |
| Galvanized G90 | Zinc coating of 0.9 oz/ft². Ideal for highly corrosive environments. |
| Prime-Painted | Provides a base coat for additional protection or paint adhesion. |
| Bare Steel | Unfinished; typically for indoor use or controlled environments. |
Type BI Inverted Form Deck is offered with galvanized (G60 and G90) and prime-painted finishes. The galvanized coatings protect against corrosion, with G90 extending that protection to highly corrosive environments. G60 and G90 finishes conform to ASTM A653 specifications.
Material and finish options
Type BI Inverted Form Deck is high-strength steel and can be ordered with a corrosion-resistant galvanized finish that meets ANSI/SDI standards, in a range of painted finishes for tailored aesthetics, or as bare steel for custom applications. Each finish is meant to improve durability and keep performance consistent.
Custom lengths
Need 6′-0″ lengths for a small project or spans up to 40′-0″ for a large one? We handle both. Our custom length service is built around your requirements for Miami and beyond, so the deck fits optimally and waste stays minimal.
Type BI Inverted Form Deck features
Type BI Inverted Form Deck offers high structural strength, efficient formwork, and corrosion-resistant finishes. It fits architectural ceilings, multi-level parking structures, and commercial floor systems that need exposed soffits.
High Structural Strength
Supports concrete and live loads while presenting an architecturally finished ceiling surface from below.
Efficient Formwork
Permanent formwork for concrete slabs means less labor and shorter construction time, since there are no temporary forms to strip.
Corrosion Resistance
Durable corrosion resistance in commercial settings comes from G60/G90 galvanized or prime-painted finishes.
Cost-Effective
Formwork and structural support in a single product trim material and labor costs on exposed ceiling work.
Compliance with Standards
Built to SDI and ANSI guidelines, giving quality and code compliance in every application.
Versatile Options
Several gauges (22–16 GA) and finishes address varied load requirements and architectural specifications.
Installation and connections
Installation practices
- Install the deck with ribs facing up, perpendicular to the supports.
- Fasten at every support with pins, powder-actuated fasteners, or TEK screws.
- Overlap sidelaps and fasten with button punching or screws at 12" o.c.
Fasteners and attachments
- Deck is secured to supports with pins or powder-actuated fasteners
- #10 TEK screws at 6" o.c. on edges
- Sidelaps are attached with button punching or #10 TEK screws at 12" o.c.
Confirm the profile, gauge, span, loads and connections against your project drawings and the applicable product load tables before ordering.
Applications

Industrial Flooring with Exposed Ceiling
Industrial floor systems get strong support, and the soffit below is architecturally finished and exposed. It is a good match for schools, offices, and civic buildings.

Multi-Level Parking Structures
Parking garage construction commonly uses it. It supplies permanent formwork and leaves a clean exposed underside, which reduces finishing costs.
Standards and product documentation
Type BI Inverted Form Deck complies with SDI (Steel Deck Institute) specifications and ANSI standards, which keeps design and performance standards high for projects in Miami.
Type BI Inverted Form Deck questions
What is Type BI inverted form deck used for?
Architectural ceiling systems, multi-level parking structures, schools, offices, and any facility where an attractive exposed soffit is wanted.
How does installing Type BI differ from standard form deck?
Type BI is laid inverted with the ribs up. That leaves the flat side exposed below as a finished ceiling, with no extra finishing materials.
Which gauges does Type BI come in?
22, 20, 18, and 16 GA, giving options for different structural requirements.
What finishes does Type BI come with?
G60 and G90 galvanized finishes resist corrosion, and prime-painted finishes provide extra protection.
Can I get Type BI cut to length in Miami?
Yes, custom lengths from 6'-0" to 40'-0" are available, ensuring a precise fit and minimal waste.
Ordering made simple
Metal Form Decks for Miami construction
Start with your plans or a takeoff. We review the profile, gauge, quantities and lengths, help with shop drawings when you need them, and come back with pricing and a delivery plan for Miami.
Send your project requirementsHelpful details for an accurate quote
- Product profile or series, dimensions, gauge and specified finish.
- Required quantities, sheet or member lengths, and project drawings.
- Project address in Miami, delivery date and site access requirements.
- Any specified load tables, connection details or supporting documentation.
How We Work
We Guide You Through the Process
From manufacturing to delivery, we ensure precision, efficiency, and compliance with industry standards.
Takeoff and Shop Drawings Services
We provide specialized takeoff services for accurate quotations and detailed shop drawings to produce optimized cutting lists for sheets, ensuring efficient execution and waste-free outcomes in your projects.
Manufacture
We manufacture metal decks to SDI and ANSI standards, ensuring strength, durability, and compliance. We provide custom lengths and high-precision fabrication for optimized performance in roof, floor, and form deck applications.
Swift Deliveries & Nationwide Reach
While based in South Florida, we serve clients nationwide, ensuring quality, efficiency, and timely deliveries across the U.S., reflecting our commitment to excellence without boundaries.
Frequently Asked Questions
Do you supply form deck in Miami?
Yes. We deliver form deck to Miami with same-day or next-day service. Call 305-760-2575 for availability.
What is the difference between form deck and composite deck?
Form deck acts as temporary or permanent formwork the concrete carries the load after curing. Composite deck bonds structurally with the concrete to share load permanently.
What is form deck for?
Form deck is temporary or permanent structural formwork for concrete slabs. It carries the weight of wet concrete during pouring and curing, giving floor and roof slabs a stable base.
How does form deck compare with composite deck?
Composite deck bonds with concrete and acts as a structural element in the finished slab. Form deck is only formwork, so after curing the concrete slab carries the load on its own.
What benefits does form deck bring to multi-level construction?
It speeds up construction by removing the need for temporary wood forms and cuts material waste. It is also a consistent, lightweight formwork system that can stay in place after the concrete cures.
Which gauges and finishes does form deck come in?
Form deck is offered in gauges 16 to 28, with G60 and G90 galvanized finishes for corrosion resistance. Custom lengths of 6 to 40 feet are available.
