SDI Member · ANSI/SDI compliant

Metal form deck supplier in Daytona Beach

Miami-produced metal form deck in Daytona Beach the fundamental support for your project needs.

Steel Deck Institute Member
SDI Member · ANSI/SDI compliant

Supplying Metal Form Decks in Daytona Beach

Miami Metal Deck supplies Metal Form Decks to contractors, erectors and fabricators building in Daytona Beach and across Volusia County and the Central Florida region. Deliveries to Daytona Beach leave our Miami Gardens facility on a schedule set with your team, with 1-day service available to major Florida cities.

Coastal conditions around Daytona Beach make corrosion protection a priority, and G90 galvanized steel is a common choice there. Our team checks the specified finish before we quote. We supply to the gauges, lengths and finishes on your approved drawings, which are designed to the Florida Building Code requirements that apply in Volusia County.

Product guide

Product specifications for your Daytona Beach project

Compare profiles, dimensions, material options and applications to prepare your order. Select a product below to explore its technical details.

9/16" Type S Form Deck

Type S Form Deck serves as permanent formwork under concrete slabs in floors and roofs. Its strength and simple installation make it a common pick, and it is available in Daytona Beach in gauges 28 GA to 20 GA, produced in line with SDI and ANSI standards.

Dimensions and profile

9/16" Type S Form Deck profile dimensions
9/16" Type S Form Deck dimensions
PropertyDimension
Profile Depth9/16 inches
Coverage Width36 inches
Rib Spacing2.57 inches (center to center)
Rib Height9/16 inches

Type S Form Deck has a shallow 9/16-inch rib depth and a standard coverage width of 36 inches, which suits fast concrete slab forming. With ribs spaced 2.57 inches (center to center), it gives a stable forming surface that holds concrete volume down without giving up structural integrity.

Gauges and thicknesses

9/16" Type S Form Deck gauges
GaugeBare steel thickness (in)Weight (lbs/sq ft)Typical applications
280.01490.65Light-duty concrete formwork, low-load applications.
260.01790.75Standard concrete slabs.
240.02391.0Medium-duty floor and roof slabs.
220.02991.25Medium-duty floors, multi-level buildings.
200.03581.5Heavy-duty formwork, bridges.

You can specify Type S Form Deck in gauges 28, 26, 24, 22, and 20. The lighter gauges (28 and 26) are an economical fit for standard concrete slabs. For longer spans and heavier concrete loads, such as bridges and industrial floors, step up to the heavier gauges (22 and 20).

Finishes and coatings

9/16" Type S Form Deck finishes
FinishDetails
Galvanized G60Zinc coating of 0.6 oz/ft². Recommended for general environments.
Galvanized G90Zinc coating of 0.9 oz/ft². Ideal for highly corrosive environments.
Prime-PaintedProvides a base coat for additional protection or paint adhesion.
Bare SteelUnfinished; typically for indoor use or controlled environments.

Galvanized (G60 and G90) and prime-painted finishes are available on Type S Form Deck. Corrosion resistance comes from the galvanized coating, with G90 providing more protection in highly corrosive environments. G60 and G90 finishes conform to ASTM A653.

Material and finish options

Type S Form Deck uses high-strength 80 KSI steel and ships with a corrosion-resistant galvanized finish that meets SDI/ANSI standards. Painted finishes are offered for tailored aesthetics, and bare steel is available for custom applications. Each option is intended to extend durability and sustain performance in demanding environments.

Custom lengths

Deck lengths start at 6′-0″ for smaller jobs and run up to 40′-0″ for large builds. We cut to the length you specify for projects in Daytona Beach and elsewhere, so the deck fits properly and leftover material stays low.

9/16" Type S Form Deck features

Looking for a form deck with strong structure, efficient concrete forming, and corrosion-resistant finishes? Type S Form Deck is a cost-effective, versatile option for multi-level buildings, bridges, and tunnel work.

High Structural Strength

Designed to support concrete slabs, giving stability and structural strength during and after concrete placement.

Efficient Concrete Formwork

This quick-to-build form deck suits slab forming in multi-level buildings, bridges, and tunnels, and it reduces labor time and material costs.

Galvanized or Prime-Painted Finish

G60/G90 galvanized or prime-painted finishes add durability and corrosion resistance where conditions are demanding.

Cost-Effective Solution

A lightweight, shallow profile limits concrete use while offering a stable forming surface, so overall project costs drop.

Compliance with SDI Standards

Conforms to Steel Deck Institute (SDI) and ANSI guidelines, supporting quality and code compliance.

Versatile Design Options

Gauges 28 through 20, G60/G90 galvanized coatings, and custom lengths between 6 and 40 feet.

Installation and connections

Installation practices

  • Run the deck perpendicular to the supports.
  • Secure it to each support using pins, powder-actuated fasteners, or TEK screws.
  • Lap the sidelaps, then fasten with screws at 12" o.c.

Fasteners and attachments

  • Pins or powder-actuated fasteners secure the deck to the supports
  • #10 TEK screws at 6" o.c. on edges and 12" o.c. for sidelaps
  • Sidelaps fastened by button punching or #10 TEK screws at 12" o.c.

Confirm the profile, gauge, span, loads and connections against your project drawings and the applicable product load tables before ordering.

Applications

Composite Floor Slabs

Composite Floor Slabs

Slab forming in multi-level buildings, bridges, and tunnels is an ideal fit. The shallow rib profile cuts concrete volume and provides an efficient, stable forming surface.

Bridge and Tunnel Formwork

Bridge and Tunnel Formwork

Type S Form Deck sees wide use as permanent concrete formwork in bridge decks and tunnels, where it supports the structure during concrete placement.

Standards and product documentation

Type S Form Deck is built to SDI (Steel Deck Institute) specifications and ANSI standards, which supports consistent design and performance for Daytona Beach projects.

9/16" Type S Form Deck questions

What does Type S form deck do?

Type S form deck is permanent formwork for concrete slabs in floor and roof systems. It provides a stable base during the pour and remains in place after the concrete cures.

What separates form deck from composite deck?

Form deck is just formwork, and after curing the concrete slab bears the load by itself. Composite deck bonds with the concrete structurally and shares the load for good.

What gauges can I order in Type S form deck?

Choose from 28, 26, 24, 22, and 20 GA, with thickness from 0.0149" up to 0.0358".

What are the recommended fastening methods?

Pins, powder-actuated fasteners, or TEK screws attach Type S Form Deck. For sidelaps, use button punching or #10 TEK screws at 12" o.c.

Can Daytona Beach projects get Type S form deck in custom lengths?

Yes, lengths from 6'-0" to 40'-0" are available. This limits waste and gives a precise fit on each project.

1" Type HD Form Deck

Type HD Form Deck is heavy-duty formwork for concrete in floors and roofs, with strong support and durability. It comes in gauges from 26 GA to 20 GA, handling greater loads and longer spans efficiently. The deck meets SDI and ANSI standards, and galvanized finishes (G60 and G90) add corrosion resistance.

Dimensions and profile

1" Type HD Form Deck profile dimensions
1" Type HD Form Deck dimensions
PropertyDimension
Profile Depth1 inch
Coverage Width36 inches
Rib Spacing4 inches (center to center)
Rib Height1 inch

Type HD Form Deck has a 1-inch rib depth and a standard 36-inch coverage width, a fit for heavy-duty concrete formwork in floors and roofs. Ribs are spaced 4 inches (center to center), and the overall material width of 39 inches gives secure overlaps and solid concrete support. The profile carries greater loads and holds down material costs, which helps on demanding construction projects.

Gauges and thicknesses

1" Type HD Form Deck gauges
GaugeBare steel thickness (in)Weight (lbs/sq ft)Typical applications
260.01790.75Light-duty concrete formwork, low-load floors.
240.02391.0Standard floors, light industrial applications.
220.02991.25Medium-duty floors, parking structures.
200.03591.5Heavy-duty formwork, bridges, industrial slabs.

Type HD Form Deck is made in gauges 26, 24, 22, and 20. Standard concrete slabs and moderate spans are handled economically by the lighter gauges (26 and 24). The heavier gauges (22 and 20) offer superior strength over longer spans and under heavier concrete loads, ideal for industrial floors, bridges, and parking structures.

Finishes and coatings

1" Type HD Form Deck finishes
FinishDetails
Galvanized G60Zinc coating of 0.6 oz/ft². Recommended for general environments.
Galvanized G90Zinc coating of 0.9 oz/ft². Ideal for highly corrosive environments.
Prime-PaintedProvides a base coat for additional protection or paint adhesion.
Bare SteelUnfinished; typically for indoor use or controlled environments.

For durability and long-term performance, Type HD Form Deck is supplied in galvanized (G60 and G90) and prime-painted finishes. Galvanizing gives excellent corrosion resistance, and G90 has a thicker zinc layer to protect in high-moisture or chemical environments. The prime-painted finish adds a protective base coat. G60 and G90 finishes conform to ASTM A653 specifications.

Material and finish options

Our Type HD Deck is made of high-strength 80 KSI steel. You can choose a corrosion-resistant galvanized finish to SDI/ANSI standards, painted finishes for tailored aesthetics, or bare steel for custom applications. The finishes all exist to enhance durability and maintain performance in demanding environments.

Custom lengths

Pick deck lengths from 6′-0″ for smaller projects to 40′-0″ for large spans. We work to your specified dimensions, with the aim of an optimal fit and minimal waste.

1" Type HD Form Deck features

The 1" Type HD Form Deck brings heavy-duty load support, efficient concrete bonding, and enhanced durability to your projects. Industrial floors, bridge formwork, and other demanding structural applications are where it excels.

Heavy-Duty Load Support

Higher concrete loads are what Type HD Form Deck is engineered for, making it ideal when superior strength and stability matter.

Efficient Concrete Bonding

The deep profile carries thicker concrete slabs, which spreads load better and supports long-term performance.

Galvanized or Prime-Painted Finish

G60/G90 galvanized or prime-painted finishes are available for durability and corrosion resistance.

Cost-Effective Formwork Solution

A fit for heavy-duty work such as parking structures, bridge formwork, and industrial floors, and it adapts easily to complex construction needs.

Compliance with SDI Standards

It meets Steel Deck Institute (SDI) and ANSI guidelines, so quality and code compliance are assured.

Versatile Gauge Options

Gauges 26 GA to 20 GA let you meet specific load requirements without losing durability.

Installation and connections

Installation practices

  • Place the deck at right angles to the supports.
  • Attach the deck at every support with pins, powder-actuated fasteners, or TEK screws.
  • Lap sidelaps and fasten with screws at 12" o.c.

Fasteners and attachments

  • Pins or powder-actuated fasteners secure the deck to supports
  • #10 TEK screws at 6" o.c. on edges and 12" o.c. for sidelaps
  • Sidelaps fastened using button punching or #10 TEK screws at 12" o.c.

Confirm the profile, gauge, span, loads and connections against your project drawings and the applicable product load tables before ordering.

Applications

Heavy Industrial Floor Systems

Heavy Industrial Floor Systems

Heavy industrial floors that carry high-load equipment and machinery rely on the strong support of Type HD Form Deck. It keeps performing over time in demanding industrial environments.

Bridge and Highway Formwork

Bridge and Highway Formwork

Permanent formwork on bridge and highway projects is a common role for Type HD Form Deck. It supports heavy concrete loads as the concrete is placed and adds lasting strength to the structure.

Standards and product documentation

Specifications from the SDI (Steel Deck Institute) apply to Type HD Form Deck, supporting high standards of design and performance.

1" Type HD Form Deck questions

What is the main purpose of Type HD Form Deck?

It is permanent formwork for heavy-duty concrete slabs, such as industrial floors, bridges, and infrastructure projects. Wet concrete rests on it during placement, and it stays in place after curing.

What gauge choices does Type HD Form Deck offer?

26 GA, 24 GA, 22 GA, and 20 GA, so you can match various load capacities and project needs.

Will Type HD Form Deck need temporary shoring?

Possibly. Temporary shoring may be required during installation to bear the deck and wet concrete weight until the slab fully cures.

Which fastening methods are recommended for Type HD Form Deck?

Pins, powder-actuated fasteners, or TEK screws are typical. Sidelaps are secured with button punching or screws at 12" o.c.

Can Type HD Form Deck be cut to custom lengths?

Yes, anywhere from 6'-0" to 40'-0". Waste stays minimal and each project gets a precise fit.

Type BI Inverted Form Deck

Architectural ceilings with an exposed soffit are what Type B Inverted Form Deck is designed for. It works as permanent formwork for concrete slabs in floors and roofs, in gauges 22 GA through 16 GA, and is a natural fit for Daytona Beach commercial and institutional buildings.

Dimensions and profile

Type BI Inverted Form Deck profile dimensions
Type BI Inverted Form Deck dimensions
PropertyDimension
Profile Depth1.5 inches
Coverage Width36 inches
Rib Spacing6 inches (center to center)
Rib Height1.5 inches

Type BI Inverted Form Deck has a 1.5-inch rib depth and a standard 36-inch coverage width. Ribs face upward when it is installed, so a smooth, flat soffit shows below and works as an architectural ceiling with no added finish. Rib spacing of 6 inches (center to center) keeps the structure sound and still accommodates concrete placement.

Gauges and thicknesses

Type BI Inverted Form Deck gauges
GaugeBare steel thickness (in)Weight (lbs/sq ft)Typical applications
220.02991.25Light-duty floors and ceilings.
200.03581.5Standard commercial floor systems.
180.04742.6Heavy-duty applications, parking structures.
160.05983.0Heavy load industrial floors.

Gauges 22, 20, 18, and 16 are offered for Type BI Inverted Form Deck. For standard commercial work, the lighter gauges (22 and 20) are a good fit. Parking structures and heavy industrial floor systems call for the added strength of gauges 18 and 16.

Finishes and coatings

Type BI Inverted Form Deck finishes
FinishDetails
Galvanized G60Zinc coating of 0.6 oz/ft². Recommended for general environments.
Galvanized G90Zinc coating of 0.9 oz/ft². Ideal for highly corrosive environments.
Prime-PaintedProvides a base coat for additional protection or paint adhesion.
Bare SteelUnfinished; typically for indoor use or controlled environments.

Galvanized (G60 and G90) and prime-painted finishes are available for Type BI Inverted Form Deck. Galvanizing resists corrosion, and G90 adds protection in highly corrosive environments. G60 and G90 finishes conform to ASTM A653.

Material and finish options

Type BI Inverted Form Deck is high-strength steel and can be ordered with a corrosion-resistant galvanized finish that meets ANSI/SDI standards, in a range of painted finishes for tailored aesthetics, or as bare steel for custom applications. Each finish is meant to improve durability and keep performance consistent.

Custom lengths

Need 6′-0″ lengths for a small project or spans up to 40′-0″ for a large one? We handle both. Our custom length service is built around your requirements for Daytona Beach and beyond, so the deck fits optimally and waste stays minimal.

Type BI Inverted Form Deck features

Choose Type BI Inverted Form Deck for strong structure, efficient formwork, and corrosion-resistant finishes. It is well matched to architectural ceilings, multi-level parking structures, and commercial floor systems with exposed soffits.

High Structural Strength

Carries concrete and live loads and also gives you a finished, exposed ceiling surface.

Efficient Formwork

As permanent formwork for concrete slabs, it saves labor and construction time because no temporary forms need to be removed.

Corrosion Resistance

G60/G90 galvanized or prime-painted finishes hold up against corrosion in commercial environments.

Cost-Effective

One product handles both formwork and structural support, which lowers material and labor costs for exposed ceilings.

Compliance with Standards

SDI and ANSI guidelines are met, so quality and code compliance carry across applications.

Versatile Options

A choice of gauges (22–16 GA) and finishes covers different load requirements and architectural specifications.

Installation and connections

Installation practices

  • Lay the deck perpendicular to the supports, ribs pointing upward.
  • At each support, fasten with pins, powder-actuated fasteners, or TEK screws.
  • Lap the sidelaps and secure them with button punching or screws at 12" o.c.

Fasteners and attachments

  • Pins or powder-actuated fasteners secure the deck to supports
  • #10 TEK screws at 6" o.c. on edges
  • Sidelaps attached through button punching or #10 TEK screws at 12" o.c.

Confirm the profile, gauge, span, loads and connections against your project drawings and the applicable product load tables before ordering.

Applications

Industrial Flooring with Exposed Ceiling

Industrial Flooring with Exposed Ceiling

Industrial floor systems gain strong support, and the architecturally finished exposed soffit makes it ideal for schools, offices, and civic buildings.

Multi-Level Parking Structures

Multi-Level Parking Structures

Parking garages often use it for permanent formwork with a clean exposed underside, which lowers finishing costs.

Standards and product documentation

Type BI Inverted Form Deck complies with SDI (Steel Deck Institute) specifications and ANSI standards, which keeps design and performance standards high for projects in Daytona Beach.

Type BI Inverted Form Deck questions

Where is Type BI inverted form deck used?

Typical uses are architectural ceiling systems, multi-level parking structures, schools, offices, and other facilities that need an attractive exposed soffit.

What makes Type BI installation different from standard form deck?

It goes in inverted, with ribs pointing upward. The flat side then faces down as a finished ceiling, so no extra finishing materials are needed.

Which gauges are offered?

Gauges 22, 20, 18, and 16 GA, so you can match different structural requirements.

Which finishes can I choose?

G60 and G90 galvanized finishes give corrosion resistance, and prime-painted finishes add protection.

Is Type BI available in custom lengths for Daytona Beach projects?

Yes. Custom lengths from 6'-0" to 40'-0" give a precise fit with little waste.

Planning your order

Metal Form Decks supply for Daytona Beach

Send your project drawings or material list so our team can review quantities, profile requirements and cut lengths. We can help with takeoffs and shop drawings, then confirm pricing and delivery options for your Daytona Beach project.

Send your drawings for a quote

What to include in your quote request

  • The profile, gauge and finish shown in your specifications.
  • Quantities and lengths, or the drawings we can take them off from.
  • The Daytona Beach job site address, your target delivery date and any access limits.
  • Load tables, attachment details or other documents your engineer specified.

How We Work

We Guide You Through the Process

From manufacturing to delivery, we ensure precision, efficiency, and compliance with industry standards.

01
01

Takeoff and Shop Drawings Services

We provide specialized takeoff services for accurate quotations and detailed shop drawings to produce optimized cutting lists for sheets, ensuring efficient execution and waste-free outcomes in your projects.

02
02

Manufacture

We manufacture metal decks to SDI and ANSI standards, ensuring strength, durability, and compliance. We provide custom lengths and high-precision fabrication for optimized performance in roof, floor, and form deck applications.

03
03

Swift Deliveries & Nationwide Reach

While based in South Florida, we serve clients nationwide, ensuring quality, efficiency, and timely deliveries across the U.S., reflecting our commitment to excellence without boundaries.

Frequently Asked Questions

Do you supply form deck in Daytona Beach?

Yes. We deliver form deck to Daytona Beach with same-day or next-day service. Call 305-760-2575 for availability.

What is the difference between form deck and composite deck?

Form deck acts as temporary or permanent formwork the concrete carries the load after curing. Composite deck bonds structurally with the concrete to share load permanently.

What is form deck for?

Form deck is temporary or permanent structural formwork for concrete slabs. It carries the weight of wet concrete during pouring and curing, giving floor and roof slabs a stable base.

How does form deck compare with composite deck?

Composite deck bonds with concrete and acts as a structural element in the finished slab. Form deck is only formwork, so after curing the concrete slab carries the load on its own.

What benefits does form deck bring to multi-level construction?

It speeds up construction by removing the need for temporary wood forms and cuts material waste. It is also a consistent, lightweight formwork system that can stay in place after the concrete cures.

Which gauges and finishes does form deck come in?

Form deck is offered in gauges 16 to 28, with G60 and G90 galvanized finishes for corrosion resistance. Custom lengths of 6 to 40 feet are available.

Phone

305 760 25 75

E-Mail

info@mmdeck.com

Address

16000 NW 49th Ave Suite A, Miami Gardens, FL 33014

Get a Free Quote